Advertisement
3 CHANNELS GYRO REMOTE CONTROL SERIES
ALLOY 2.4GHZ HEIGHT HOLD HELICOPTER
NO.S107H
Understanding the Transmitter
ON/OFF Button
Left Rotation
Trimming
Auto take-off/Auto
landing (single press
and single beep).
For emergency stop,
press and hold it for
3 seconds.
Left stick (throttle)
①Up/down
②Pairing procedure:
turn on the transmitter,
move the left stick
(throttle) fully up and
after fully down (the
indicator lights will
stop flashing and turn
solid).
It is strongly recommended to read the manual carefully before
flying. Inapropriate operations may lead to unitended crashes or
injuries (of the pilot or third parties).
-1-
Right rotation
trimming
Speed Modes Button
(single press - double
beep will be emited
indicating advanced
mode; press the key
again and single beep
will be emited indicating
beginners mode).
Right stick
①Forward/backward/
left-right rotation.
Advertisement
Table of Contents
Related Manuals for Gyros S107H
Summary of Contents for Gyros S107H
- Page 1 It is strongly recommended to read the manual carefully before flying. Inapropriate operations may lead to unitended crashes or injuries (of the pilot or third parties). 3 CHANNELS GYRO REMOTE CONTROL SERIES ALLOY 2.4GHZ HEIGHT HOLD HELICOPTER NO.S107H Understanding the Transmitter ON/OFF Button Left Rotation Right rotation...
-
Page 2: Installing And Charging The Battery
Installing and charging the battery Installing transmitter batteries Battery Cover 4 x AA Batteries Transmitter battery installation: open the battery cover at the back of the transmitter. Install 4pcs AA batteries according to the polarity indications (Note: batteries are not included). -
Page 3: Left/Right Rotation
Flying Instructions 1.Turn on the transmitter. 2.To turn on the helicopter, move the on/off switch at the top of the helicopter to the ON status/position. The power light will turn on. 3.Place the helicopter on the ground. Make sure the rear end of the helicopter faces the pilot. -
Page 4: Safety Guide
If the helicopter begins to rotate quickly while hovering (left stick is not moved left/right), please adjust the trim button on the transmitter until the helicopter starts hovering as normal. Clockwise rotational trimming button Counter clockwise rotation If the helicopter rear end motor spins clockwise making the helicopter unstabel, please press the right trimming button on the transmitter until the helicopter regains stability. - Page 5 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 6 Operating Instructions： *The product is made out of light and thin materials. Inapropriate operations may lead to unitended crashes. It may cause the helicopter to be easily damaged. *After flying the helicopter avoid touching the motors. The motors may be very hot and can cause burns if touched.
- Page 7 Manufacturer Guangdong Syma Model Aircraft Industrial Co., Ltd. The Crossing of No.2 West Xingye Road and North Xingye Road, Laimei. Industrial Park Chenghai District Shantou City Guangdong China. The company has the right of final interpretation of this instruction manual statement.
Need help?
Do you have a question about the S107H and is the answer not in the manual?
Questions and answers