Advertisement
Installation, Precautions & Servicing
Ador – Luma – Valentino - Jaeger
Carefully remove the fire from the packing checking neither the heater nor the power
cable has been damaged during transport. Do not operate the fire if damaged. Please
bear in mind the weight of the fire before removal from the packaging and installation.
Consider if help is required. Always read this manual first before attempting to install
or use and keep in a safe place. Any alteration to the power cable should only be done
Your fire is guaranteed for one year from the date of purchase. In the unlikely event of
a breakdown you have access to our customer services team, simply call 01543 251122
during office hours, 9am – 5pm or e-mail on
are found in a box that is packed at the side of the fire.
This product is only suitable for well insulated spaces or occasional use
IMPORTANT
by a qualified electrician.
info@flameritefires.com
The accessories
1 |
P a g e
Advertisement
Table of Contents
Related Manuals for Flamerite Fires Luma Series
Summary of Contents for Flamerite Fires Luma Series
- Page 1 Installation, Precautions & Servicing Ador – Luma – Valentino - Jaeger IMPORTANT Carefully remove the fire from the packing checking neither the heater nor the power cable has been damaged during transport. Do not operate the fire if damaged. Please bear in mind the weight of the fire before removal from the packaging and installation.
-
Page 2: Important Safety Information And Warnings
Important Safety Information and Warnings • WARNING: In order to avoid overheating, do not cover the heater. • For indoor use only. • Do not use the fire in the vicinity of a bath, shower or swimming pool. • Never use the fire to dry laundry. •... -
Page 3: Electrical Connections
RECYCLING Please recycle responsibly. Take your item to your local recycling centre. You can easily locate your nearest centre on the www.recyclenow.com website or check with your retailer for details on either a collection service or a store take-back scheme (some may apply charges). -
Page 4: Installation Instructions
Installation Instructions Wall mounting Suite Screws Rawl Plugs Luma 3x 60mm 2x 35mm 2x 16mm 3x 50mm 2x 35mm Ador 3x 60mm 2x 35mm 2x 16mm 3x 50mm 2x 35mm Jaeger 4x 60mm 2x 35mm 2x 16mm 4x 50mm 2x 35mm The height at which you may wish to fix the fire in the wall is up to you, though we recommend anywhere from 350-450mm from the floor to the bottom of the fire opening (not the bottom of the fire). - Page 5 Log Effect Your fuel effect may depend on what you have ordered to go with your suite. Pebbles & glass beads come as standard. A small ember set can be part of this effect, all of which should be arranged randomly across the fuel bed to suit (not pictured).
- Page 6 Verada Large Cinder P a g e...
-
Page 7: Opening And Closing
Jaeger 1360 Glass Fitting & Removal WARNING: The glass used is toughened, if mishandled it is designed to shatter. Extra care should be taken during this procedure. Make sure the fire is turned off and the heater allowed to cool. Insert •... -
Page 8: Maintenance
Remove and replace the lamps, fuel bed, fuel effect and glass. Please note that replacement Lamps are only covered from purchase by a 2-year warranty. Replacements are available from Flamerite Fires Ltd Cleaning The fire can be cleaned with a soft cloth and nonabrasive glass cleaner. -
Page 9: Troubleshooting
Type of heat output/room temperature control With distance control option Room temperature control, with open window detection Adaptive Start With electronic room temperature control plus week timer Contact details: Flamerite Fires Ltd. Greenhough Road, Lichfield. Staffs. WS137AU P a g e... -
Page 10: Circuit Diagram
Type of heat output/room temperature control With distance control option Room temperature control, with open window detection Adaptive Start With electronic room temperature control plus week timer Contact details: Flamerite Fires Ltd. Greenhough Road, Lichfield. Staffs. WS137AU Circuit Diagram 10 | P a g e...
Need help?
Do you have a question about the Luma Series and is the answer not in the manual?
Questions and answers