Sample Setup - Yamaha MLA-200 Owner's Manual

Sample setup

Use a CAT5e or higher grade STP cable
to connect the MLA-200 to the Ethernet
switch.
TO HOST jack on the instrument
PHONES jack on the instrument
PoE powered Ethernet
switch
(Dante network)
MRX7-D
WARNING
NOTE
If the output jack on the instrument
is stereo, use a conversion cable.
Headset-type headphones
(When used by two people)
Headset-type headphones
WARNING
Use headphones with an impedance of
40Ω or more. Using headphones with
an impedance of less than 40Ω may
cause oscillation, extremely loud
noises or hearing loss.
NOTE
• When used by one person, use the MAIN
jack.
• Use headset-type headphones that are
compatible with the CTIA standard.
MLA-200 Owner's Manual
9