Table of contents Your E8/E80 IMPORTANT SAFEGUARDS Control elements 1 Preparing and using for the first time JURA on the Internet ............................10 Setting up the machine ..........................10 Filling the bean container ...........................10 Determining the water hardness ......................10 First-time use ..............................11 Connecting milk ............................13...
Page 3
Transport / Emptying the system ......................40 Disposal .................................40 9 Technical data 10 Index 11 JURA contact details / Legal information Scope of validity These instructions for use apply to the following models: In the interests of clarity, however, the instructions for use only refer to the ‘E8’...
IMPORTANT SAFEGUARDS IMPORTANT SAFEGUARDS Follow the basic safety When using electrical appliances, basic safety precautions shall precautions always be followed, to reduce the risk of fire, electric shock, and/or injury to persons, including the following: Read all instructions. Do not touch hot surfaces. Use handles or knobs. To protect against fire, electric shock and injury to persons, do not immerse power cord, plugs, or body of machine in water or other liquid.
Page 5
Use for any other purpose will be deemed improper. JURA Elektroapparate AG cannot accept any responsibility for the consequences of improper use. People, including children, who...
Page 6
IMPORTANT SAFEGUARDS J CAUTION This appliance is for household use. Any servicing other than cleaning and user maintenance shall be performed by an authorized service representative: Do not immerse base in water or try to disassemble. Do not put the appliance or any individual parts in the dishwasher.
Page 7
IMPORTANT SAFEGUARDS NEVER DO Never fill instant coffee, chocolate mix etc. into the bean (or you will void your container or ground coffee funnel (filler funnel for ground warranty protection): coffee). It will damage the functioning of the brewing chamber. Never fill sugar coated coffee beans into the bean container.
Control elements Control elements J HOT J HOT Figure: Your machine may look different to the one shown. Filler funnel cover Cover cap for grinder adjustment switch Filler funnel for ground coffee Grinder adjustment switch Bean container with On/Off button Q aroma preservation cover Milk system with Water tank cover...
Page 9
Control elements Display Multi-function buttons (button function depends on what is shown in the display) Service socket for JURA Smart Connect (Smart Fine foam frother (used in different Connect is not included in all model variants) model variants) Accessories Container for milk system cleaning...
1 Preparing and using for the first time 1 Preparing and using for the first time JURA on the Internet Visit us on the Internet (www.jura.com). You will find interesting and up-to-date information on your E8 and on every aspect of coffee. Setting up the machine...
1 Preparing and using for the first time T You will then be able to read the degree of water hardness from the discoloration of the Aquadur® test strip and the description on the packaging. Level Display German Degrees of general Parts per Indicator Strip number Degree (°dH)
Page 12
1 Preparing and using for the first time T Press the button that corresponds to the language you want, e.g. ‘English’. ‘Saved’ appears briefly on the display to confirm the setting. ‘Water hardness’ E If you do not know the hardness of your water, you must find this out first (see Chapter 1 ‘Preparing and using for the first time –...
(e.g. the Cool Control Wireless milk cooler). To do this, the receiver of the Cool Control or the JURA Smart Connect must be plugged into the service socket. E The Smart Connect can be protected against unauthorized access using a PIN.
Page 14
1 Preparing and using for the first time T Position the accessory near the coffee machine (a maximum of 0.5 m away). T Switch on the accessory and the coffee machine. T Press the reset button of the Smart Connect (e.g. with a paper clip).
– and impairs the taste. We therefore recommend prewarming the cups. The full coffee aroma can develop only in prewarmed cups. You can purchase a JURA cup warmer from your specialized dealer. You can make permanent settings for all products in programming mode (see Chapter 4 ‘Permanent settings in programming mode –...
2 Preparation Latte macchiato, Your E8 prepares latte macchiato, cappuccino and other cappuccino and other specialty coffees with milk at the touch of a button. There is no specialty coffees with need to move the glass or cup. milk E This chapter applies to the professional fine foam frother and the fine foam frother.
2 Preparation T Place a cup under the coffee spout. T Press the ‘Coffee’ button. Preparation starts. ‘Coffee’ and the coffee strength are displayed. The preset amount of water for coffee flows into the cup. Preparation stops automatically. Your E8 is once more ready for use.
2 Preparation T Set the selector switch for the professional fine foam frother to the Milk position (see image). E If you wish to prepare milk foam, set the selector switch to the Milk Foam position (selector switch in vertical position). T ...
2 Preparation T Open the powder chute cover. ‘Ground coffee’ ‘Please add ground coffee’ T Place one level measuring spoon of ground coffee into the filler funnel. T Close the cover of the filler funnel. T Press the ‘Espresso’ button. Preparation starts.
2 Preparation Adjusting the grinder You can adjust the grinder on a continuous scale to suit the degree of roast of your coffee. NOTICE If you adjust the consistency of grind when the grinder is not operating, the grinder adjustment switch could be damaged. T ...
T Close the water tank cover. Switching on the machine T Place a receptacle under the coffee spout. T Press the On/Off button Q to switch the E8 on. ‘Welcome to JURA’ ‘Machine is heating’ ‘Machine is rinsing’, the system is rinsed. The rinse stops automatically.
3 Daily operation T Clean the fine foam frother (see Chapter 5 ‘Maintenance – Cleaning the fine foam frother’). T Remove the milk pipe and rinse it thoroughly under running water. T Dismantle and rinse the fine foam frother (see Chapter 5 ‘Maintenance –...
4 Permanent settings in programming mode 4 Permanent settings in programming mode J WARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T ...
4 Permanent settings in programming mode Adjusting the product settings J WARNING Hot coffee, hot steam and hot water can cause scalding. Scalding is a serious burn. T Use extreme care when handling hot liquid or steam. T Allow liquid to cool down before drinking. T ...
4 Permanent settings in programming mode Example: Proceed as follows to change the coffee strength for one coffee. T Press the ‘ Pc ’ button. T Press the ‘ > ’ button several times until ‘3/5’ is displayed. T Press the ‘Expert mode’ button. ‘Expert mode’ E Next select the button of the product for which you would like to make settings.
4 Permanent settings in programming mode Setting the water The harder the water is, the more frequently the E8 needs to be hardness descaled. It is therefore important to set the water hardness accurately. The water hardness was set when the machine was first used. You can change this setting at any time.
4 Permanent settings in programming mode Unit for amount of water Example: Proceed as follows to change the unit for the amount of water from ‘ml’ to ‘oz’. T Press the ‘ Pc ’ button. T Press the ‘ > ’ button several times until ‘4/5’...
5 Maintenance 5 Maintenance J WARNING Use of maintenance products that are harmful to health and discharge of liquids during maintenance program. Harmful if swallowed. Irritating to eyes and skin. T Keep children AWAY. T Keep children away from the machine while it is performing a maintenance program.
Non-recommended cleaning agents will not optimally remove milk residues. This may cause the cappuccino frother to become blocked and fly off the machine. Discharge of hot steam. T Use only original JURA milk system cleaner. J WARNING Harmful and irritating cleaning agent. Harmful if swallowed.
Page 30
5 Maintenance E JURA milk system cleaner is available from specialized dealers. E To clean the milk system, use the container supplied. E This chapter applies to the professional fine foam frother and the fine foam frother. T Press the ‘ Pc ’...
8.5 oz (250 ml) cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly. T Re-assemble the professional fine foam frother. E Ensure that all individual parts are correctly and firmly connected to ensure optimum operation of the professional fine foam frother.
8.5 oz (250 ml) cold water and 1 capful of JURA milk system cleaner. Then rinse the parts thoroughly. T Re-assemble the fine foam frother. E Ensure that all individual parts are correctly and firmly connected to ensure optimum operation of the fine foam frother.
J WARNING Non-recommended (e.g. liquid) cleaning agents may contain substances that could damage the machine or leave residues. T Use only original JURA cleaning tablets. These are specially formulated for your machine. J WARNING Harmful and irritating cleaning agent. Harmful if swallowed.
The operation is interrupted, ‘Add cleaning tablet’. T Open the cover of the filler funnel for ground coffee. T Insert a JURA cleaning tablet into the filler funnel. T Close the cover of the filler funnel. T Press the ‘Next’...
Page 35
5 Maintenance J WARNING Non-recommended descaling agents (e.g. vinegar) may contain substances that could damage the machine or leave residues. T Use only original JURA descaling tablets. These are specially formulated for your machine. J WARNING J WARNING Harmful and irritating descaling agent. Harmful if swallowed.
Page 36
5 Maintenance T Completely dissolve 3 JURA descaling tablets in a receptacle holding 17 oz (500 ml) of water. This may take several minutes. T Pour the solution into the empty water tank and insert it into the machine. T Place a receptacle under the fine foam frother.
T Remove the water tank. T If you use a CLEARYL Smart filter cartridge, remove this. T Completely fill the water tank and dissolve 3 JURA descaling tablets in it. T Leave the water tank with the descaling solution for several hours (e.g.
6 Display messages 6 Display messages Message Cause/Result Action ‘Fill water tank’ The water tank is empty. You T Fill the water tank (see Chapter 3 ‘Daily cannot prepare any products. operation – Filling the water tank’). ‘Empty coffee The coffee grounds container T Empty the coffee grounds container grounds container’...
Q. Contact customer support in played. your country (see Chapter 11 ‘JURA contact details / Legal information’). E If you were unable to solve the problem, contact customer support in your country (see Chapter 11 ‘JURA contact details / Legal information’).
8 Transport and environmentally friendly disposal 8 Transport and environmentally friendly disposal Transport / Emptying the Keep the packaging for your E8. It should be used to protect the system machine during transport. In order to protect the E8 from frost during transport, the system must be emptied.
9 Technical data 9 Technical data Voltage 120 V ~, 60 Hz Power 1450 W Conformity mark Pump pressure static, max. 15 bar Holding capacity of water tank 64 oz (1.9 l) (without filter) Holding capacity of bean container 10 oz (280 g) Holding capacity of coffee grounds max.
Contact details 44 Instant coffee Cover Ground coffee 18 Filler funnel for ground coffee 8 Internet 10 Water tank 8 Cup platform 8 JURA Customer support 44 Contact details 44 Descaling Internet 10 Machine 34 Language 27 Water tank 37...
Page 43
10 Index Programming mode 23 Machine Automatic switch-off 25 Cleaning 33 Language 27 Descaling 34 Milk system rinsing 26 Regular maintenance 22 Setting the water hardness 26 Rinsing 28 Unit for amount of water 27 Setting up 10 Switching off 22 Regular maintenance 22 Rinses Switching on 21...
Need help?
Do you have a question about the E80 and is the answer not in the manual?
Questions and answers