Removing And Installing The Door; Door Adjustment - Skoda FABIA 2000 Workshop Manual

58

Removing and installing the door

Removing
–
Disconnect multiple-plug connection under the rubber
sleeve of pillar B.
Unscrew nuts ⇒ item 22 in 58-1 page 1 of the hinge
–
bolts.
Tightening torque: 30 Nm.
Release screw ⇒ item 20 in 58-1 page 1 on the door
–
arrester.
Tightening torque: 30 Nm.
–
Lift door out of the hinge bolts.
Installing
Installation is carried out in the reverse order.

Door adjustment

To correctly adjust the door release the door hinges on
the pillars and door. Other adjusting measures, e.g. align-
ing the doors towards the top are ineffective. The door will
drop again at the following overpressures.
–
Release screws until the door can be shifted.
•
The doors are correctly adjusted if they are at an over-
all equal distance from the door frame all round in the
closed condition.
58-1
2
page
Rear door
FABIA 2000 Body Work
Edition 01.05
S00.5319.15.20