Sample Tube Adapter (Optional); Winlog97 Pc Program Installation; Connections; 3650Ex Instrument - Pc Connection - Hach ORBISPHERE 3650 Atex User Manual

Hide thumbs Also See for ORBISPHERE 3650 Atex:

Table of Contents

3.3 Sample tube adapter (optional)

A model 32051A sample tube adapter can be attached to the flow chamber's inlet tubing. This

adapter, in turn, attaches to 6 mm or ¼ inch stainless steel or flexible tubing using rubber gasket

model 32813 (or, for 8 mm tubing, rubber gasket model 32814).

The tightening ring provides a compression fitting to the sample tube.

Install the WinLog97 program onto the PC by inserting the accompanying CD into your PC and

running the SetUp program. Simply follow the on-screen instructions.

When finished, a new Windows Program Group labeled Orbisphere is created containing the

software and help files.

Explosion hazard. Only use the Interface Box 29122 in the safe area and never in the

explosive area.

The model 29122 interface box must be used to connect the 3650EX instrument to a personal

computer (PC) as illustrated in

instrument to RS-232 compatible signals.

Figure 3 3650Ex instrument to PC connection

Figure

•

This connection should be made exclusively within the safe area

WARNING

3. This unit converts TTL digital signals from the

Installation

Table of Contents

Do you have a question about the ORBISPHERE 3650 Atex and is the answer not in the manual?