Advertisement
Quick Links
Lumination
Suspended LED Fixture
(Series EP24)
Features
• Long life (50,000 hour rated life)
• 5 year warranty
• Dry location rated
BEFORE YOU BEGIN
Read these instructions completely and carefully.
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all NEC and local codes.
• Use only UL or IEC approved wire for input/output
connections. Minimum size 18 AWG (0.82mm
Save These Instructions
Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
Each luminaire is to be used with remote driver kit, model no. EP-DKIT400.
Wiring to be performed by qualified electrician only.
LED Luminaires
TM
WARNING/AVERTISSEMENT
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l'alimentation avant d''inspecter, installer ou déplacer le luminaire.
• Assurez-vous de correctement mettre à la terre le boîtier d'alimentation
électrique.
RISQUES D'INCENDIE
• Respectez tous les codes NEC et codes locaux.
).
• N'utilisez que des fils approuvés par UL ou IEC pour les entrées/sorties de
2
connexion. Taille minimum 18 AWG (0.82mm
Installation Guide
).
2
Advertisement
Related Manuals for GE Lumination EP24 Series
Summary of Contents for GE Lumination EP24 Series
- Page 1 Installation Guide Lumination LED Luminaires Suspended LED Fixture (Series EP24) Features • Long life (50,000 hour rated life) • 5 year warranty • Dry location rated BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSEMENT RISK OF ELECTRIC SHOCK RISQUES DE DÉCHARGES ÉLECTRIQUES •...
- Page 2 Define Distance Between Canopy Sets Single unit installation scenario: Canopy set 1179mm (46.4 in.) (distance between canopy sets) Luminaire Multiple units in series installation scenario: 1193mm (47 in.) 1207mm (47.5 in.) 1207mm (47.5 in.) 1207mm (47.5 in.) 1193mm (47 in.) 1st luminaire 2nd luminaire 3rd luminaire...
-
Page 3: Unit Installation
Unit Installation To driver enclosure Junction box in ceiling Crossbar Carefully unpack unit from its packaging. Properly Attach crossbar to junction box in ceiling with two inspect for defects before installing. Wear work 1/4 inch screws. Repeat on other side. gloves to prevent dirt and oil from being transferred to the luminaire. - Page 4 Optional Mounting Method - Connecting Suspended Fixtures in Series Canopy set without power cable Canopy sets with power cable For multiple units installed in series, all canopy sets will have a power cable except the last canopy. Disconnect Remove “Y” shape wires suspension wire Bracket “Y”...
-
Page 5: Specifications
GE and the GE Monogram are trademarks of the General Electric Company and are used under license. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions, and GE makes no warranty or guarantee, express or implied, that such performance will be obtained under end-use conditions.