Advertisement
Quick Links
1
Read these instructions before installing and operating this
product, and retain for future reference.
WARNING! Isolate mains supply before commencing
installation or making adjustments.
Check that the product is free from damage before
installation.
For use only with liquids (neutral or slightly aggressive) and
non-flammable gases.
2
40
60
4
Liquid
U.S Registered Trademark
Copyright © 2018 Honeywell Inc. All Rights Reserved
DIFFERENTIAL PRESSURE SWITCH (LIQUID & GAS)
Gas/Air
DPSL200, DPSL1000
INSTALLATION INSTRUCTIONS
This product must be installed in accordance with these
instructions and any applicable local or national electrical
and safety regulations. Improper installation or application
of this device can be dangerous.
This product cannot be used for U.S. FDA-controlled
application areas.
Refer to the DPSL200, DPSL1000 Product Data Sheet
(EN0B-0772GE51) for full technical specifications.
3
5
-10 to 80°C
(14 to 176°F)
EN1B-0651GE51 R0818
Advertisement
Related Manuals for Honeywell DPSL200
Summary of Contents for Honeywell DPSL200
- Page 1 This product cannot be used for U.S. FDA-controlled Check that the product is free from damage before application areas. installation. Refer to the DPSL200, DPSL1000 Product Data Sheet For use only with liquids (neutral or slightly aggressive) and (EN0B-0772GE51) for full technical specifications. non-flammable gases.
- Page 2 (14 to 176°F) – Manufactured for and on behalf of the Environmental & Energy Solutions Division of Honeywell Technologies Sàrl, Rolle, Z.A. La Pièce 16, Switzerland by its Authorized Representative: Home and Building Technologies Honeywell GmbH Böblinger Str. 17 71101 Schönaich...
Need help?
Do you have a question about the DPSL200 and is the answer not in the manual?
Questions and answers