Naviforce Legion Brown NF9128 Instructions

NF9128 MOVEMENT INSTRUCTION
(Button A)
LIGHT/SET
(Button B)
MODE
A .

Brief Introduction of Functions

15-unit timing function, displaying hour, minute, second, year (from 2000 to 2099), month and week.

In the Local Time Mode, there is an animated display in every 10 seconds.

Time of 24 major cities in the world.

Three sets of alarm and hourly chime function

12- /24-hour time format selection and fully-automatic calendar

1/100s chronograph and split time function (L-00~L-99)

20 sets of LAP memories could be stored / inquired (from L01 to L019 and the last set of memory.)

Countdown Function(the maximum value could be 23 hours 59 minutes 59 seconds; auto repeat

function; 30 seconds of alarm signal reminder at the end of countdown）
5 seconds of fading EL backlight

In any setting mode, hold C or D buttons for a few seconds to enter quick adjustment function

In any setting mode, it would automatically go back to time display mode if without any operation for 1

minute.
B .

Function Modes

Button B
Local Time Mode
1. In any mode, press A to turn on EL backlight for 3 seconds.
2. Local Time Mode
Press C to deactivate or activate Summer Time; after Summer Time is activated, the signal ("DST")

would be seen in the display. Summer Time "DST" refers to a time which is 1 hour earlier than the
standard time, and please note that not all the countries or regions use Summer Time.
In Local Time Mode, press D to deactivate or activate hourly chime function, with the signal ("CHI").

Press A for two seconds to enter time setting state

a). At this moment, "12- /24-hour time format" flashes, and press Button B to select the following items
in turns:
12//24H
Button B
World Time Mode
Button B
Countdown
Second Minute
City
(Button D)
(Button C)
Button B
Alarm Mode chronograph Mode
Button B
Mode
Hour
Date
START
RESET
Button B
Memory Mode
Year
Month