Related Manuals for Letsfit D32
Summary of Contents for Letsfit D32
- Page 1 Wireless Earbuds User Manual Thank you for purchasing our products. This manual addresses the safety guidelines, warranty and operating instructions. Please review this manual thoroughly before operating your device.
-
Page 2: Package Contents
Package Contents ● Wireless earbuds × 1 pair (left and right) ● Charging case × 1 ● Eartips × 3 pairs (large, medium, small) ● Micro USB cable × 1 ● User manual × 1 At a Glance Charging Case Micro USB charging port LED indicator - 1 -... - Page 3 Earbuds LED indicator MFB button (multi-function button) Microphone Air hole Left Earbud (Main Earbud) Charging contacts Replaceable eartips Right Earbud - 2 -...
- Page 4 Earbud LED Indicator Guide ● Power on: LED indicators stay white for 2 seconds ● Power off: LED indicators stay red for 2 seconds ● Pairing mode (using both earbuds): LED indicator on the left earbud flashes red and white alternately ●...
- Page 5 ● The left indicator flashes when the left earbud is charged; ● The right indicator flashes when the right earbud is charged; ● LED indicators are off when earbuds are fully charged; LED status when charging box is being charged: ●...
-
Page 6: Wearing The Earbuds
Wearing the Earbuds Insert the earbud into your ear and rotate to fit comfortably. Ensure the microphone is pointing towards your mouth. - 5 -... -
Page 7: Using The Earbuds
Using the Earbuds ● Charge the earbuds When you use the earbuds for the first time, remove the insulating films on the charging contacts of the earbuds. Remove the insulating films before use. 1) Align the charging contacts on the right earbud with the charging pins on the right side of the case. - Page 8 2) Repeat steps 1 and to charge the left earbud. 3) Close the case when the earbuds LED indicators are solid red. ● Charge the charging case 1) Plug the small end of the USB cable into the Micro USB port of the charging case.
-
Page 9: Power On/Off
● When the charging case is out of power and you put the earbuds back into the case, the earbuds will not turn off automatically. Turn off the earbuds manually. ● When the charging case is out of power, the earbuds will not turn on automatically the time you take them out of the case. - Page 10 (LED indicator on the left earbud flashes red and white alternately). 4) In the list of found Bluetooth devices in your phone or other Bluetooth devices, choose "D32-L" to pair. 5) Enter "0000" if your phone or Bluetooth device asks you to enter a code to pair.
- Page 11 ● If pairing failed, turn off the earbuds first and then press and hold the MFB buttons until the indicator on the left earbud flashes red and white alternately and earbuds enter pairing mode. Choose "D32-L" in your phone to pair.
- Page 12 6) In the list of found Bluetooth devices in your phone or other Bluetooth devices, choose "D32-L" if you use the left earbud or "D32-R" if you use the right earbud to pair.
-
Page 13: Troubleshooting
2). Take the earbuds out of the case and they are automatically on. 3). Wait that the indicator on the left earbud flashes red and white alternately and earbuds enter pairing mode. 4). Choose "D32-L" in your phone to pair. - 12 -... - Page 14 2). Press and hold the MFB buttons until the indicator on the left earbud flashes red and white alternately and earbuds enter pairing mode. 3). Choose "D32-L" in phone B to pair. Q: Why isn’t the sound clear/consistent sometimes? A: Bluetooth signal is transmitted wirelessly and signals can be affected, which results in intermittent sound of earbuds, in the following conditions: ●...
- Page 15 ● There are high-power electronic devices nearby. ● There are other Bluetooth devices and are being turned on/off nearby. To resume stable connection between the earbuds and your Bluetooth device, try to avoid the above conditions and do the pairing again. Q: Why doesn’t the charging case charge the earbuds? A: ●...
-
Page 16: Specifications
Specifications Model Bluetooth Standard V5.0 Operating Range 33 feet/10 meters (No obstacles between) Supporting Protocols A2DP/HFP/HSP/AVRCP Waterproof Rate IPX5 Charging Time 1.5 hours (earbuds); 1 hour (charging case) about 3.5 hours (Varies according to volume Talk/Playing Time level and audio content) Charging Voltage DC 5V Li-polymer... -
Page 17: Safety And Warranty
SAFETY AND WARRANTY Important Safety Instructions ● Use of earbuds will impair your ability to hear other sounds. Use caution while using your earbuds when you are engaging in any activity that requires your full attention. ● If you have a pacemaker or other electrical medical devices, you should consult your physician before using this product. - Page 18 ● Do NOT use in areas where there are explosive hazards. ● Do NOT submerge the earbuds in water. Do NOT expose the earbuds to moving water (e.g., from a faucet, etc.). ● Do NOT wear the earbuds while showering or bathing, or when participating in water sports, e.g., swimming, waterskiing, surfing, etc.
-
Page 19: Warranty
charging case is used near children. ※ Do not expose charging case to water, rain, liquids or snow. ※ Use of a power supply or charger that is not recommended or sold by power pack manufacturer may result in a risk of fire or injury. ※...
Need help?
Do you have a question about the D32 and is the answer not in the manual?
Questions and answers