CamOne Gravity Air 2D Manual page 16

2.Connect the bellows to the bottom plate.
Now place the pre-mounted plate with the gimbal on the mounted plate with the bellows.
Push the bellows into the plate. Take your time when performing this work.
When finished successfully, you can insert your camera. Release the 2 screws on the camera bail and mount
it again once the camera is inserted. Make sure that the bail and the camera don't get damaged.
Important: Never activate the gimbal without camera!
The mount is compatible to the following cameras:
- CamOne infinity
- GoPro Hero 3 | 3+ | 4 Series
16