Parking Sensors - Fiat 500L Owner's Handbook Manual

96
To store a speed value higher/lower
than that displayed, move stalk A
upwards (+) to store a higher speed
value, or move stalk A downwards (-) to
store a lower speed value.
Each movement of the stalk
corresponds to an increase/decrease in
speed of about 1 km/h, while keeping
the stalk held upwards/downwards
will increase/decrease the speed with
an increment of 5 km/h.
DEVICE ACTIVATION/
DEACTIVATION
To activate/deactivate the device, press
the CANC/RES button (B fig. 96).
Activation of the device: it is
indicated by the warning light on the
instrument panel switching on.
Deactivation of the device: it is
signalled by the displaying of symbol
.
DEACTIVATING THE
DEVICE
Turn ring nut A to position O. The
deactivation of the device is indicated
by the warning light switching off on
the instrument panel and, on some
versions, by a message and
on the display.
Device automatic deactivation: the
device deactivates automatically in
F0Y0050C
the event of fault in the system.

PARKING SENSORS

110) 59)
SENSORS
The sensors are located in the rear
symbol
bumper fig. 97 and their function is to
detect the presence of any obstacles
near the rear part of the vehicle and
inform the driver, through an
intermittent acoustic signal.
97
ACTIVATION/
DEACTIVATION
The sensors are automatically activated
when reverse gear is engaged. As the
obstacle behind the vehicle gets closer
to the car, the acoustic signal becomes
more frequent.
F0Y0140C
101