Care And Cleaning; For Your Safety - Sunbeam S20 Operating Instructions Manual

•
Glide the shaver gently over the fabric in an up and
down motion.
•
To prevent possible damage, do not press down
heavily.
•
Empty the fuzz bin after each use.
•
Use a damp cloth to wipe the surface of the shaver.
Do not allow water to enter the inner parts.
•
If the device will not be used for a long period of
time, remove the batteries from their compartment.
•
Place a small amount of lubricating oil on the inner
side of the metal screen cover after several uses.
•
If you notice a decrease in effectiveness of the
shaver, remove the screen cover by turning it
counter-clockwise, and carefully take out the cutting
blade. Clean the blade and inner compartment with
a soft brush. Then, reinstall the blade and tighten the
screen cover. Important: Blades are sharp; please
exercise caution.
•
This device is equipped with a safety feature, which
stops operation when the screen cover is loose or
open.
•
Use this device only as recommended in this
manual.

Care and Cleaning

For Your Safety