Advertisement
Index
Introduction
Intended use
Equipment
Technical specifications
Safety
Safety guidelines
Additional safety information
Before using for the first time
Assembling the appliance
Usage
Connecting to the water mains
Installing the gun
Automatic Stop System
Gun with pressure-gauge
Gun safety catch
At the end of a job
Maintenance
Disposal
Troubleshooting
Additional information
Guarantee terms
Certificate of compliance
page 2
page 2
page 2
pag. 3
pag. 3
pag. 4
page 5
page 6
page 6
page 6
page 6
page 7
Cleaning
pag. 7
pag. 8
pag. 8
page 11
page 11
GB
1
Advertisement
Table of Contents
Related Manuals for Lavor SUPERWASH 160
Summary of Contents for Lavor SUPERWASH 160
- Page 1 Index Introduction Intended use page 2 Equipment page 2 Technical specifications page 2 Safety Safety guidelines pag. 3 Additional safety information pag. 3 Before using for the first time Assembling the appliance pag. 4 Usage Connecting to the water mains page 5 Installing the gun page 6...
- Page 2 Introduction High pressure washer SUPERWASH 160 Standard equipment Introduction Turbo nozzle Rotary brush Please read this instruction manual thoroughly, referring to it whenever Nozzle with pressure regulator necessary before starting a job. This is Gun with pressure gauge because, as with all appliances, the high-...
- Page 3 Safety Protection rating IPX5 • Caution! Keep children well away from Vibration transmitted the power lead and the appliance. Children to operator 0.56 m/s are often not aware of the hazards that household appliances may present. Technical specifications plate • This appliance is intended for outdoor use Ensure that the specifications listed on the only.
-
Page 4: Before Using For The First Time
Safety Before using for the first time an electrical overload cutout system (CL. • Before unwinding or winding the hose, I) and pump bypass valve or stop system. switch the machine off and release the pressure in the hose itself (pull spray •... - Page 5 Before using for the first time Usage Assemble the appliance mountings on the bracket. • Fit the hose connector underneath and 1. Photo sequence D: screw securely onto the outlet connector • Fit the wheel onto the axle • Fit the crank handle to the right hand •...
- Page 6 Usage mm (1/2"). turning the knob at the end of the nozzle Caution: Inlet water temperature must (see also photo C) never exceed 40°C; • Ensure that the high-pressure hose “-” To reduce operating pressure: and the hose connector are securely Turn the knob towards “-”...
-
Page 7: Maintenance & Cleaning
Usage Maintenance Cleaning To disengage the catch Maintenance Cleaning • Before starting any maintenance work on Press the lock button on the left hand the high-pressure cleaner, purge the side of the gun . The trigger is released. pressure and disconnect the unit from the mains electricity and water. -
Page 8: Maintenance
Maintenance Cleaning Disposal Troubleshooting from the gun. Troubleshooting 2)Clean the nozzle orifice with the nozzle cleaning pin provided. Fault The pump does not 3)Rinse the nozzle under running water. start when the switch is pressed. Disposal Cause • The plug is not properly connected to the •... -
Page 9: Troubleshooting
Troubleshooting Repair • Remove and clean the Repair • Remove the lance from filter (see paragraph the gun and clean the “MAINTENANCE / nozzle with the pin CLEANING”). provided. • Remove the lance from • Supply the machine the gun and clean the with water correctly. - Page 10 Troubleshooting Repair • Remove and clean the Fault The machine does not filter (see paragraph suck in detergent. “MAINTENANCE / CLEANING”). Cause • Tank empty. • Use water at a • Nozzle regulator knob temperature lower than turned to “+”. 40°C.
Need help?
Do you have a question about the SUPERWASH 160 and is the answer not in the manual?
Questions and answers