Transport And Storage; Transporting The Product; Storing The Product - Bosch Rexroth LU 2 Assembly Instructions Manual

26/54

Transport and storage

Bosch Rexroth AG, MIT: LU 2, 3 842 358 814/2017-01
7 Transport and storage
• Observe the transport information on the packaging.
• Shipping weight: see delivery documents.
• Secure the product to prevent toppling!
• The ambient conditions must be controlled when storing and transporting;
see page 53.

7.1 Transporting the product

Lifted loads may fall.
Falling objects can result in serious injury (or even death).
Always use lifting equipment with suffi cient load bearing capacity
(see shipping documents for product weight).
Make sure the carrying straps are correctly fastened before raising the product.
Secure the product to prevent toppling while lifting.
Make sure no one except the operator is in the danger area when raising and
lowering the product.

7.2 Storing the product

• Only store the product on a fl at surface.
• Protect the product from mechanical stress.
• Protect the product from environmental infl uences such as dirt and moisture.
• Pay attention to the ambient conditions, see page 53.
• For belt sections with mounted motor-transmission combination and/or mounted
lubrication unit:
Support the belt section so that the motor-transmission combination or lubrication
unit are not overloaded.
WARNING