Mackie Emulation Protocol; Hui Emulation Protocol; Figure 4.2:Selecting Native Mode Protocol; Figure 4.3:Selecting Mackie Control Emulation Protocol - Tascam FW-1082 Owner's Manual

To set the FW-1082 to Native protocol:
1 Open the FW-1082 Control Panel
2 Select the
tab
Settings

Mackie Emulation Protocol

The FW-1082 can be used to emulate the control
messages sent by the Mackie Control™.
When in Mackie Control Emulation mode, the audio
and MIDI functionality of the FW-1082 are
unchanged, but the MIDI messages transmitted and
recognized by most of the control surface are
changed to closely pattern those of the Mackie Con-
trol.
This enables you to use the FW-1082 with software
applications which may not yet directly support the
FW-1082's Native Mode, but do support the Mackie
Control.
To set up FW-1082 to the Mackie Emulation
protocol:
1 Open the FW-1082 Control Panel
2 Select the
tab
Settings

HUI Emulation Protocol

The FW-1082 can be used to emulate the control
messages sent by the Mackie HUI™ (Human User
Interface).
When in HUI emulation mode, the audio and MIDI
functionality of the FW-1082 are unchanged, but the
MIDI messages transmitted and recognized by most
of the control surface are changed to closely pattern
4 – Control Surface Modes and Operation
3 In the drop-down
select
Figure 4.2: Selecting Native Mode protocol
For more detailed information on specific implemen-
tation within the host application, please refer to the
Application Notes for your software of choice.
3 In the drop-down
select
Figure 4.3: Selecting Mackie Control emulation
For detailed information on how the FW-1082's con-
trol surface maps to controls within specific applica-
tions, please refer to the Application Notes for the
corresponding application .
those of the Mackie HUI. This enables you to use the
FW-1082 with software applications which may not
yet directly support the FW-1082's Native mode, but
do support the HUI.
To set up the FW-1082 in HUI emulation protocol:
1 Open the FW-1082 Control Panel
TASCAM FW-1082 Owner's Manual
Control Protocol
.
FW-1082 NATIVE
Control Protocol
Mackie Control Emulation
protocol
menu,
list,
.
19