GE IM-5D Owner's Manual & Installation Instructions page 14

INSTALLING THE WATER LINE (Continued)
TIGHTEN THE PIPE CLAMP
5
Tighten the clamp screws until the sealing
washer begins to swell.
NOTE: Do not overtighten or you may crush
the tubing.
ROUTE THE TUBING
6
the refrigerator.
or floor (behind the refrigerator or adjacent base
14
Installation Instructions
Washer
CONNECT TUBING VALVE
7
for copper tubing onto the end of the tubing
and connect it to the shutoff valve.
the valve. Tighten the compression nut securely.
of the tubing into the shutoff valve and tighten
compression nut until it is hand tight, then
tighten one additional turn with a wrench. Over
tightening may cause leaks.
Packing Nut
NOTE:
plumber.
FLUSH OUT THE TUBING
8
Turn the main water supply on and flush out the
tubing until the water is clear.
through the tubing.
Tubing
49-60807 Rev. 3