Advertisement
Available languages
Available languages
Quick Links
Read before installing
The RedLINK Internet Gateway provides remote access to RedLINK thermostats
through the internet and smart phones.
Must be installed by a trained, experienced technician. Read these instruc-
tions carefully. Failure to follow these instructions can damage the product or
cause a hazardous condition.
Specifications
Model: THM6000R7001
Operating Ambient Temperature: -40 °F to 165 °F (-40 °C to 73.9 °C)
Operating Relative Humidity: 5% to 95% (non-condensing)
Power Adapter Rated Input Voltage: 100 VAC ~ 240 VAC @ 50 Hz/60 Hz
Power Adapter Output Voltage Range: 4.80 VDC ~ 5.20 VDC
Max Output Current: 1000mA
Maximum Number of Hosts: 4 per RedLINK Internet Gateway
A "host" is:
• A thermostat that is wired to the heating/cooling equipment, or to a zone on a
zone panel.
• If the thermostat uses an EIM (Equipment Interface Module), then the EIM is the
host (one thermostat per EIM).
• If the thermostat is linked to an HZ322 or HZ432 zone panel with a THM4000R
wireless adaptor, then the zone panel is the host (up to 3 thermostats per HZ322
and up to 4 thermostats per HZ432).
For assistance with this product please visit http://customer.resideo.com
or call Resideo Customer Care toll-free at 1-855-Red-Link (855-733-5465)
® U.S. Registered Trademark.
Copyright © 2019 Resideo Technologies, Inc.
All rights reserved.
THM6000R7001
RedLINK™ Internet
Gateway
Installation
Instructions
M36571A
Need Help?
33-00250EFS-03
Advertisement
Related Manuals for Honeywell Home RedLINK THM6000R7001
Summary of Contents for Honeywell Home RedLINK THM6000R7001
- Page 1 THM6000R7001 RedLINK™ Internet Gateway Installation Instructions M36571A Read before installing The RedLINK Internet Gateway provides remote access to RedLINK thermostats through the internet and smart phones. Must be installed by a trained, experienced technician. Read these instruc- tions carefully. Failure to follow these instructions can damage the product or cause a hazardous condition.
-
Page 2: Installation
THM6000R7001 RedLINK™ Internet Gateway Installation Step 1 Connect the power cable to the RedLINK internet gateway. Step 2 Connect the power adapter to a wall socket. Step 3 Connect an Ethernet cable from the RedLINK internet gateway to an internet-connected home router. - Page 3 THM6000R7001 RedLINK™ Internet Gateway LED Behavior Power LED Solid Green: The Gateway is powered Internet LED Solid Red: No Ethernet Connection (cable disconnected or Ethernet connection error) INTERNET POWER Solid Amber: Ethernet Connection Detected (cable REDLINK connected and Gateway is retrieving the IP address) Blinking Amber: Acquiring DHCP Blinking Green: Data Exchange with TCC Solid Green: Normal, Connected to TCC...
- Page 4 33-00250EFS—03 M.S. Rev. 10-19 | Printed in United States This product is manufactured by Resideo Technologies, Inc., Golden Valley, MN, 1-800-468-1502 ©2019 Resideo Technologies, Inc. The Honeywell Home trademark is used under license from Resideo Technologies, Inc. All rights reserved.
-
Page 5: Notice D'installation
Passerelle Internet RedLINK™ THM6000R7001 Notice d’installation M36571A Lire avant l’installation La passerelle Internet RedLINK fournit un accès à distance aux thermostats RedLINK par Internet et téléphones intelligents. L’installation doit être faite par un technicien d’expérience ayant reçu la formation appropriée. Lire attentivement ces instructions. Le fait de ne pas les suivre risque d’endommager le produit ou de constituer un danger. - Page 6 Passerelle Internet RedLINK™ THM6000R7001 Installation Étape 1 Brancher le câble d’alimentation à la passerelle Internet RedLINK. Étape 2 Brancher l’adaptateur d’alimentation à une prise murale. Étape 3 Brancher le câble Ethernet de la passerelle Internet RedLINK à un routeur résidentiel connecté à M36568A Internet.
- Page 7 Passerelle Internet RedLINK™ THM6000R7001 Guide des témoins DEL DEL d’alimentation Vert continu : La passerelle est alimentée DEL Internet Rouge continu : Aucune connexion Ethernet (le câble INTERNET est déconnecté ou il y a une erreur de connexion POWER Ethernet) REDLINK Ambre continu : Connexion Ethernet détectée (le câble est connecté, et la passerelle extrait l’adresse IP)
- Page 8 33-00250EFS—03 M.S. Rev. 10-19 | Imprimé aux États-Unis Ce produit est fabriqué par Resideo Technologies, Inc., Golden Valley, MN, 1-800-468-1502 ©2019 Resideo Technologies, Inc. La marque de commerce Honeywell Home est utilisée sous licence avec l’autorisation d’Resideo Technologies, Inc. Tous droits réservés.
-
Page 9: Instrucciones Para La Instalación
Puerta de acceso a Internet THM6000R7001 RedLINK™ Instrucciones para la instalación M36571A Leer antes de instalar La puerta de acceso a Internet RedLINK proporciona acceso remoto a los termostatos RedLINK a través de Internet y teléfonos inteligentes. Deberá ser instalada por un técnico capacitado y experimentado. Lea detenidamente estas instrucciones. -
Page 10: Instalación
Puerta de acceso a Internet THM6000R7001 RedLINK™ Instalación Paso 1 Conecte el cable de alimentación a la puerta de acceso a Internet RedLINK. Paso 2 Conecte el adaptador de corriente al tomacorriente de pared. Paso 3 Conecte un cable Ethernet desde la puerta de acceso a Internet RedLINK al enrutador residencial M36568A... - Page 11 Puerta de acceso a Internet THM6000R7001 RedLINK™ Comportamiento del indicador LED Indicador LED de energía activada Verde fijo: La puerta de acceso está encendida. Indicador LED de Internet Rojo sólido: No hay ninguna conexión Ethernet (el INTERNET cable está desconectado o hay un error de conexión POWER de Ethernet).
- Page 12 33-00250EFS—03 M.S. Rev. 10-19 | Impreso en EE. UU. Este producto es fabricado por Resideo Technologies, Inc., Golden Valley, MN, 1-800-468-1502 ©2019 Resideo Technologies, Inc. La marca comercial Honeywell Home se utiliza en virtud de la licencia emitida por Resideo Technologies, Inc. Todos los derechos reservados.
Need help?
Do you have a question about the RedLINK THM6000R7001 and is the answer not in the manual?
Questions and answers
Hello, I **** adding THM6000R7001 RedLINK Internet gateway to my RedLINK ForcusPro 6000 system. In the installation manual, at Step 4, it says Enter the WIRELESS SETUP MODE on you thermostat, however my thermostat, TH6320R1004 does not have such a model. Can I simply ignore this step, or is there some other setup step that I need to do? Thanks
If your RedLINK FocusPro 6000 system with the TH6320R1004 thermostat does not have a WIRELESS SETUP MODE, follow these steps to add the Honeywell Home RedLINK THM6000R7001 Internet Gateway:
1. Power the Gateway:
- Plug the power adapter into the RedLINK Internet Gateway.
- Connect the adapter to a wall outlet.
2. Connect to the Network:
- Use an Ethernet cable to connect the RedLINK Gateway to your home router.
3. Pair the Thermostat Manually:
- On the thermostat, enter the installer setup mode by pressing and holding the appropriate buttons (refer to the thermostat manual).
- Navigate to the RedLINK settings and enable communication with the Gateway.
4. Press the CONNECT Button:
- On the RedLINK Internet Gateway, press and release the CONNECT button.
- The Gateway will search for compatible RedLINK devices.
5. Complete Registration:
- Create an account at [www.mytotalconnectcomfort.com](http://www.mytotalconnectcomfort.com).
- Validate the account and log in.
- Register the Gateway by entering the required information.
Once completed, the thermostat should be linked to the RedLINK Gateway, enabling remote access.
This answer is automatically generated