Installing The Device And Drivers - Targus Mobile Docking Station User Manual

Targus Mobile Docking Station with Video
NOTE: To download latest service packs, please visit your
computer manufacturer's website or Microsoft's download
centre:
http://support.microsoft.com/
default.aspx?scid=fh%3BEN-US%3Bsp
Installing
Drivers
To use the Targus Docking Station, you must first install
the driver onto your computer. Connect the docking
station to your computer and Windows plug-and-play will
install the hardware drivers for each port.
WARNING: You must install the Docking Station software
BEFORE connecting it to your computer. Otherwise, the
Docking Station will not work properly.
Installing the Docking Station Driver
Installing the docking station driver enables your
operating system to recognize the docking station and its
ports once it's connected.
1 Turn on your computer.
2 Insert the driver software CD into your computer's CD-
ROM drive.
3 If setup does not begin automatically, click Start, Run,
then enter D:\Setup.exe (where D: is the path of your
CD-ROM drive) and then click OK.
4 Follow any on-screen instructions to complete the
installation.
5 Click Finish and restart your computer when
prompted.
the Device
9
and