Error Message; Test Mode - Megasat Countryman GPS User Manual

4. Startup and operation

4.4 Error Message

Error message LED will be illuminated and the error message detail will be shown on
LCD display, this will detail if there is a problem with main unit.
1. HOME POSITION error
If antenna does not come back to HOME position within the allowed time or the
system does not recognise HOME position despite the antenna being back at HOME
position (The Limit sensor is faulty).
2. TUNNER error
If there is no response when searching the satellite due to a faulty tuner or its set-
tings.
3. MOVEMENT error
If the antenna cannot move to correct position for some reason.
4. COMMUNICATION error
If connection is lost between the unit and controller that lasts longer than 5 se-
conds.

4.5 TEST mode

TEST mode can be initialised when either an error message is shown or the antenna is
at HOME position.
1. Press MODE once to enter TEST mode and press OK.
2. Go to the available functions on LCD using the arrow buttons and press OK to select.
3. To exit, press MODE and unit will return to previous status.
10
WARNING!
When user physically moves the unit, the unit
must be returned to HOME position to pre-
vent damage.!
ENGLISH