Page 1 Advanced User Guide...
Page 2: Introduction
After shooting, play images back and check whether they have been properly recorded. If the camera or memory card is faulty and the images cannot be recorded or downloaded to a computer, Canon cannot be held liable for any loss or inconvenience caused.
Page 3: Item Check List
If you purchased a Lens Kit, check that the lenses are included. Be careful not to lose any of the above items. When you need Lens Instruction Manuals, download them from the Canon website ( = 4). The Lens Instruction Manuals (PDF files) are for lenses sold individually. Note that when purchasing the Lens Kit, some of the accessories included with the lens may not match those listed in the Lens Instruction Manual.
Page 4: Instruction Manuals
Downloading the Advanced User Guide/Instruction Manuals The Advanced User Guide and Instruction Manuals for lenses and software (PDF files) can be downloaded from the Canon website to a computer or other device. Download site Advanced User Guide/Supplemental Information www.canon.com/icpd...
Page 5 The Advanced User Guide and Instruction Manuals for lenses and software (PDF files) can be downloaded to a smartphone or tablet using the QR code. www.canon.com/icpd A software app is required to read the QR code. Select your country or region of residence, then download the Advanced User Guide/Instruction Manuals.
Page 6: Quick Start Guide
Quick Start Guide Insert the battery ( = 46). Upon purchase, charge the battery to start using ( = 44). Insert the card ( = 48). With the card’s label facing toward the back of the camera, insert it into the card slot. Attach the lens ( = 54).
Page 7 Quick Start Guide Turn the camera on ( = 52). Set the shooting mode switch to < A > ( = 74). All the necessary camera settings will be set automatically. Focus on the subject ( = 59). [p] (an AF point) appears over any face detected.
Page 8 Quick Start Guide Review the picture. The image just captured will be displayed for approx. 2 sec. on the screen. To display the image again, press the <x> button ( = 258). To view the images captured so far, see “Image Playback” ( = 258). To delete images, see “Erase Images”...
Page 9: About This Manual
About This Manual Icons in this Manual <6> : Indicates the dial. < W > < X > < Y > < Z > : Indicates the corresponding direction on the < V > cross keys. <Q> < 0 > : Indicates the Quick Control/Setting button.
Page 10 About This Manual Basic Assumptions for Operational Instructions and Sample Photos Instructions apply to the camera with the power on ( = 52). It is assumed that all the menu settings and Custom Functions are set to their defaults. Screens in instructions show the state with [Menu display] in [ j : Display level settings] set to [Guided].
Page 11: Compatible Cards
Compatible Cards The following cards can be used with the camera regardless of capacity. If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera ( = 435). SD/SDHC/SDXC memory cards UHS-I cards supported.
Page 12: Table Of Contents
Chapters Introduction Preparation and Basic Operations Basic Shooting Modes Advanced Shooting Modes Shooting Settings Flash Photography Playback Settings Wireless Settings Function Settings Custom Functions (C.Fn) My Menu Reference...
Page 13: Contents
Contents Introduction Item Check List ..................3 Instruction Manuals ................4 Quick Start Guide ...................6 About This Manual .................9 Compatible Cards ................11 Chapters....................12 Contents ....................13 Contents by Purpose ................23 Index to Features .................26 Safety Instructions ................30 Handling Precautions ................33 Part Names ..................36 Preparation and Basic Operations Charging the Battery ................44 Inserting/Removing the Battery ............46...
Page 14 Contents Touch-Screen Operation ..............70 Quick Control ..................71 Basic Shooting Modes Scene Intelligent Auto/Hybrid Auto (Fully Automatic) ......74 Special Scene Mode ................82 Self Portrait Mode ................84 Portrait Mode..................85 Smooth Skin Mode ................86 Landscape Mode .................87 Sports Mode ..................88 Close-up Mode ..................89 Food Mode ...................90 Night Portrait Mode ................91 Handheld Night Scene Mode ...............92...
Page 15 Contents Shooting Settings Still Photo Shooting Tab Menus: Still Photo Shooting ............119 Image Quality ..................124 Still Image Aspect Ratio ..............127 Image Review Time................129 Lens Aberration Correction ..............130 Drive Mode ..................135 Self-Timer ...................137 Exposure Compensation ..............139 ISO Speed Settings ................140 Auto Lighting Optimizer ..............143 Highlight Tone Priority ................144 Metering Mode ...................145 Metering Timer ...................147...
Page 16 Contents AF Operation ..................169 AF Method..................172 Eye Detection AF ................182 Continuous AF ...................183 Focus Mode ..................184 Manually Focusing with a Lens after AF ..........185 AF-Assist Beam Firing ...............186 Manual Focus..................187 Setting MF Peaking ................189 Image Stabilization ................190 Exposure Lock (AE Lock) ..............191 Type of Digest Movie .................192 Remote Control Shooting ..............193 General Still Photo Shooting Cautions ..........194...
Page 17 Contents Other Menu Functions ...............237 General Movie Recording Cautions ...........242 Flash Photography Flash Photography ................246 Flash Exposure Compensation ............248 FE Lock ....................249 Flash Control ..................250 Playback Settings Tab Menus: Playback Settings ............256 Image Playback .................258 Magnified Image Display ..............261 Index Display (Multiple-Image Display) ..........262 Movie Playback ..................263 Editing a Movie’s First and Last Scenes ..........266 Frame Extraction ................268...
Page 18 Contents Print Ordering ..................286 Photobook Set-up ................290 Creative Filters ...................293 Creative Assist ...................296 Red-Eye Correction................298 Create Album ..................299 Cropping.....................302 Resizing .....................304 Rating ....................305 Slide Shows ..................308 Set Image Search Conditions ............310 Image Jump by Swiping ..............312 Playback Information Display .............314 AF Point Display.................316 View from Last Seen ................317 Wireless Settings...
Page 19 Contents Registering Multiple Connection Settings ..........394 Wi-Fi Settings ..................395 Bluetooth Settings ................396 Changing the Nickname ..............397 Geotagging Images with GPS Information from Other Devices ..398 Changing or Deleting Connection Settings ........401 Airplane Mode ..................403 Clearing Wireless Communication Settings to Default ......404 View Info Screen ................405 Virtual Keyboard Operations ..............406 Responding to Error Messages ............407...
Page 20 Contents Date/Time/Zone .................440 Language ...................443 Shutter Button Function for Movies ............444 Video System ..................445 Touch Control ..................446 Screen Autolock Settings ..............447 Beeping ....................448 HDMI Resolution ................449 HDMI HDR Output ................450 Shooting Information Display .............451 Reverse Display .................453 Display Performance ................454 Reset Camera ..................455 Copyright Information .................456 Manual/Software URL ................458...
Page 21 Contents My Menu Tab Menus: My Menu .................466 Registering My Menu .................467 Reference Software .....................474 Importing Images to a Computer ............476 Household Power Outlet Accessory ...........478 Troubleshooting Guide ...............479 Error Codes ..................495 Performance Data ................496 Information Display ................503 Index ....................514...
Page 23: Contents By Purpose
Contents by Purpose Shooting Shoot automatically = 73– = 103 (Basic  shooting modes) Shoot continuously = 135 ( i Continuous  shooting) Take a picture of yourself in a = 137 ( j Self-timer)  group Freeze the action = 108 ( s Shutter-priority AE) ...
Page 24 Contents by Purpose Image Quality Shoot with image effects matching = 156 (Picture Style selection)  the subject Make a large-size print of the = 124 ( 73 , 83 , 1 , F )  picture Take a lot of pictures = 124 ( 7 a, 8 a, b) ...
Page 25 Contents by Purpose Wireless Features Send images to a smartphone = 323 (Connecting to a  smartphone) Automatically send images to a = 351 (Connecting to a  computer via Wi-Fi) computer Print photos = 359 (Connecting to a printer ...
Page 26: Index To Features
Index to Features Power Charging the battery ( = 44) AF operation ( = 169) Battery level ( = 53) AF method ( = 172) Eco mode ( = 437) AF point selection ( = 177) Power saving ( = 438) Eye Detection AF ( = 182) Continuous AF ( = 183) Cards...
Page 27 Index to Features Image Quality Shooting Image quality ( = 124) Shooting mode ( = 38) Still image aspect ratio ( = 127) Quick Control ( = 71) Lens aberration correction Creative Assist ( = 80) ( = 130) Creative filters ( = 98) ISO speed (still photos) ( = 140) Depth-of-field preview ( = 111) Auto Lighting Optimizer ( = 143)
Page 28 Index to Features Movie Recording Playback Autoexposure recording ( = 200) Image review time ( = 129) Manual exposure recording Single-image display ( = 258) ( = 202) Touch playback ( = 260) Movie recording size ( = 207) Magnified view ( = 261) Sound recording ( = 215) Index display ( = 262) Wind filter ( = 215)
Page 29 Index to Features Image Editing Wireless Features Creative filters ( = 293) Connect to smartphones ( = 323) Red-eye correction ( = 298) Auto send images to smartphones ( = 337) Video snapshot album ( = 299) Remote control (EOS Utility) Cropping JPEGs ( = 302) ( = 351) Resizing JPEGs ( = 304)
Page 30: Safety Instructions
Safety Instructions Be sure to read these instructions in order to operate the product safely. Follow these instructions to prevent injury or harm to the operator of the product or others. WARNING: Denotes the risk of serious injury or death. Keep the product out of the reach of young children.
Page 31 Safety Instructions Observe the following instructions when using a battery charger or AC adapter. y Periodically remove any dust buildup from the power plug and power outlet using a dry cloth. y Do not plug in or unplug the product with wet hands. y Do not use the product if the power plug is not fully inserted into the power outlet.
Page 32 Safety Instructions CAUTION: Denotes the risk of injury. Do not fire the flash near the eyes. It may hurt the eyes. Do not look at the screen or through the viewfinder for prolonged periods of time. This may induce symptoms similar to motion sickness. In such a case, stop using the product immediately and rest for a while before resuming use.
Page 33: Handling Precautions
The camera is not waterproof and cannot be used underwater. If the camera gets wet, contact a Canon Service Center immediately. Wipe off any water droplets with a clean, dry cloth, and if the camera is exposed to salty air, wipe it off with a clean, well-wrung wet cloth.
Page 34 If you have not used the camera for some time or if there is an important shoot such as a foreign trip coming up, have the camera checked by your nearest Canon Service Center or check the camera yourself and make sure it is working properly.
Page 35 Besides dust entering the camera from outside, in rare cases, lubricant from the camera’s internal parts may adhere to the front of the sensor. If smudges are visible on images, have the sensor cleaned by a Canon Service Center. Lens...
Page 36: Part Names
Part Names ( 7 ) ( 8 ) ( 6 ) ( 1 ) ( 2 ) ( 17 ) ( 18 ) ( 9 ) ( 3 ) ( 10 ) ( 4 ) ( 11 ) ( 5 ) ( 12 ) ( 19 ) ( 20 ) ( 21 )
Page 37 Part Names ( 6 ) ( 7 ) ( 12 ) ( 8 ) ( 9 ) ( 13 ) ( 2 ) ( 3 ) ( 4 ) ( 5 ) ( 10 ) ( 14 ) ( 11 ) ( 1 ) Screen <...
Page 38 Part Names Shooting Mode Switch/Shooting Modes (1) A : Scene Intelligent Auto Mode ( = 74) All you do is press the shutter button. Fully automatic shooting, with settings determined by the camera. (2) z: Still Photo Mode For still photo shooting. You can let the camera determine settings for the subject or scene, or you can take more control over shooting.
Page 39 Part Names Special Scene Mode Self Portrait ( = 84) Food ( = 90) Portrait ( = 85) Night Portrait ( = 91) Handheld Night Scene Smooth skin ( = 86) ( = 92) HDR Backlight Control Landscape ( = 87) ( = 93) Sports ( = 88) Silent Mode ( = 94)
Page 40 Part Names Battery Charger LC-E12 Charger for Battery Pack LP-E12 ( = 44). (1) Power plug (2) Charge lamp (3) Full-charge lamp (4) Battery pack slot Battery Charger LC-E12E Charger for Battery Pack LP-E12 ( = 44). (1) Battery pack slot (2) Full-charge lamp (3) Charge lamp (4) Power cord...
Page 41 Part Names Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration. Pull the strap to take up any slack and make sure the strap will not loosen from the buckle.
Page 43: Preparation And Basic Operations
Preparation and Basic Operations This chapter describes preparatory steps before you start shooting and the basic camera operations.
Page 44: Charging The Battery
Charging the Battery Detach the protective cover provided with the battery. Fully insert the battery into the charger. Do the opposite to remove the battery. LC-E12 Recharge the battery. For LC-E12 As shown by the arrow, flip out the battery charger’s prongs and insert the prongs into a power outlet.
Page 45 Charging the Battery Upon purchase, the battery is not fully charged. Charge the battery before use. Recharge the battery on the day before or on the day it is to be used. Even during storage, a charged battery will gradually drain and lose its capacity.
Page 46: Inserting/Removing The Battery
Inserting/Removing the Battery Insert a fully charged Battery Pack LP-E12 into the camera. Insertion Slide the battery compartment cover to open it. Insert the battery. Insert the end with the electrical contacts. Insert the battery until it locks in place. Close the cover.
Page 47 Inserting/Removing the Battery Removal ( 1 ) Open the battery compartment cover. Turn the camera off. Check that the access lamp (1) is off, then open the cover. Remove the battery. Press the battery lock lever as shown by the arrow and remove the battery. To prevent short-circuits, always attach the included protective cover ( = 44) to the battery.
Page 48: Inserting/Removing The Card
Inserting/Removing the Card The captured images are recorded onto the card. Make sure the card’s write-protect switch (1) is set upward to enable writing and erasing. Insertion Open the card slot cover. Insert the card. Insert the card with the label facing the back of the camera until it clicks in place.
Page 49 Inserting/Removing the Card Removal Open the cover. ( 1 ) Turn the camera off. Check that the access lamp (1) is off, then open the cover. If [Saving...] is displayed on the screen, close the cover. Remove the card. Gently push in the card, then let it go to eject.
Page 50 Inserting/Removing the Card When the access lamp is lit or blinking, it indicates that images are being written to, read from, or erased from the card, or data is being transferred. Do not open the card slot cover or remove the battery at this time. Also, never do any of the following while the access lamp is lit or blinking.
Page 51: Using The Screen
Using the Screen You can change the direction and angle of the screen. Tilting the Screen Upward The screen lifts upward and opens to about 180°. When including yourself in shots, you can view a mirror image of yourself by rotating the screen around toward the front of the camera.
Page 52: Turning On The Power
Turning on the Power To turn the camera on, press the power button. Press it again to turn the camera off. Setting the Date, Time, and Time Zone If you turn on the power and the date/time/zone setting screen appears, see = 440 to set the date/time/zone.
Page 53 Turning on the Power Battery Level Indicator : Battery level is sufficient. : Battery level is low, but the camera can still be used. : Battery will be exhausted soon. (Blinks) : Charge the battery. Doing any of the following will exhaust the battery faster: y Pressing the shutter button halfway for a prolonged period.
Page 54: Attaching/Detaching A Lens
Attaching/Detaching a Lens The camera is compatible with EF-M lenses. Attaching a Lens Remove the caps. Remove the rear lens cap and the body cap by turning them as shown by the arrows. Attach the lens. Align the white mount index on the lens with the white mount index on the camera and turn the lens as shown by the arrow until it clicks in place.
Page 55 Attaching/Detaching a Lens Detaching the Lens While pressing the lens release ( 3 ) button, turn the lens as shown by ( 2 ) the arrow. Turn the lens until it stops, then detach ( 1 ) Attach the rear lens cap to the detached lens.
Page 56: Attaching/Detaching Ef/Ef-S Lenses
Attaching/Detaching EF/EF-S Lenses EF and EF-S lenses can be used by attaching the optional Mount Adapter EF-EOS M. Attaching a Lens Remove the caps. Remove the caps on the lens, adapter, and body. ( 1 ) Attach the lens to the adapter. ( 2 ) Align the red or white mount index on the lens with the corresponding mount...
Page 57 Attaching/Detaching EF/EF-S Lenses Set the lens’s focus mode switch to <AF>. <AF> stands for autofocus. <MF> stands for manual focus. Autofocus will not operate. Remove the front lens cap. Detaching the Lens While pressing the lens release button, turn the adapter as shown by the arrow.
Page 58: Basic Operations
Basic Operations Holding the Camera As you shoot, you can tilt the screen to adjust it. For details, see = 51. Normal angle Low angle...
Page 59 Basic Operations Shutter Button The shutter button has two steps. You can press the shutter button halfway. Then you can further press the shutter button completely. Pressing Halfway This activates autofocusing and the automatic exposure system that sets the shutter speed and aperture. The exposure setting (shutter speed and aperture value) is displayed for approx.
Page 60 Basic Operations <6> Dial While looking at the screen, turn the <6> dial. Use this dial to set the shutter speed, aperture value, etc.
Page 61 Basic Operations INFO Button Each press of the button changes the information shown. The following sample screens are for still photos.
Page 62: Setting The Screen Display Level
Setting the Screen Display Level You can set how information is displayed on the screen according to your preference. Change the settings as necessary. Display the main tabs. Press the <M> button to display the main tabs. Select the [j] tab. Press the <...
Page 63 Setting the Screen Display Level Menu Display You can select the display type from [Guided] or [Standard]. If you set [Guided], main tab descriptions are provided when you press the <M> button. If you set [Standard], the menu screen is displayed immediately after you press the <M>...
Page 64 Setting the Screen Display Level Feature Guide A brief description of functions and items can be displayed when you use Quick Control or menu settings. By default, it is set to [Enable]. Select [Feature guide]. Select [Enable]. Sample screens Quick Control screen Menu screen ( 1 ) ( 1 )
Page 65: Menu Operations And Settings
Menu Operations and Settings ( 4 ) ( 5 ) ( 1 ) ( 2 ) ( 3 ) <M> button < 0 > button Screen Dial < V > Cross keys Menu Screen < A > mode Movie mode Still photo mode (in advanced shooting modes) The menu tabs and items displayed vary depending on the shooting mode.
Page 66 Menu Operations and Settings Menu Setting Procedure With [ j : Menu display] set to [Guided] Display the main tabs. ( 1 ) When you press the <M> button, the main tabs (1) and a description of the selected tab will appear. Select a main tab.
Page 67 Menu Operations and Settings Select an option. Press the < W > < X > or < Y > < Z > keys of the cross keys to select the desired option. (Some options are selected with the < W > and < X > keys, and others are selected with the <...
Page 68 Menu Operations and Settings With [ j : Menu display] set to [Standard] Display the menu screen. ( 1 ) Press the <M> button to display the menu screen. Select a tab. Press the < Y > < Z > keys to select the main tab (1) and secondary tab.
Page 69 Menu Operations and Settings Dimmed Menu Items Example: Highlight tone priority Dimmed menu items cannot be set. The menu item is dimmed if another function setting is overriding it. You can see the overriding function by selecting the dimmed menu item and pressing <...
Page 70: Touch-Screen Operation
Touch-Screen Operation You can operate the camera by tapping or dragging on the screen (touch- screen panel) with your finger. Sample screen (Quick Control) Use your finger to tap on (touch briefly and then remove your finger from) the screen. For example, when you tap on [Q], the Quick Control screen appears.
Page 71: Quick Control
Quick Control You can directly select and set the settings displayed on the screen. This is called Quick Control (except in [ A ] mode). Press the <Q> button (7). Select a setting item. Press the < W > < X > keys for selection. When the screen at left is displayed, press the <...
Page 73: Basic Shooting Modes
Basic Shooting Modes This chapter describes effective shooting techniques in [ A ], [ D ], Special scene ( = 82), and Creative filters ( = 98) modes. Simply compose your shot and press the shutter button, and all settings are set automatically.
Page 74: Scene Intelligent Auto/Hybrid Auto (Fully Automatic)
Scene Intelligent Auto/Hybrid Auto (Fully Automatic) [ A ] [ D ] is a fully automatic mode. The camera analyzes the scene and sets the optimum settings automatically. It can adjust focus automatically on either the still or moving subject by detecting the motion of the subject.
Page 75 Scene Intelligent Auto/Hybrid Auto (Fully Automatic) Focus on the subject. Press the shutter button halfway to focus. If [D] blinks, use the <D> lever to raise the flash. You can also focus by tapping a person’s face or another subject on the screen (Touch AF).
Page 76 Scene Intelligent Auto/Hybrid Auto (Fully Automatic) AF operation (One-Shot AF or Servo AF) is set automatically when you press the shutter button halfway. Even when automatically set to One-Shot AF, the camera will switch to Servo AF if subject motion is detected while you are pressing the shutter button halfway (<...
Page 77 Scene Intelligent Auto/Hybrid Auto (Fully Automatic) Minimizing Blurred Photos Use a sturdy tripod that can bear the weight of the shooting equipment. Mount the camera securely on the tripod. Using a wireless remote control (sold separately, = 193) is recommended. Focusing is not possible (indicated by an orange AF point).
Page 78 Scene Intelligent Auto/Hybrid Auto (Fully Automatic) Recomposing the Shot Depending on the scene, positioning the subject toward the left or right to include a balanced background will result in a picture with better perspective. Pressing the shutter button halfway to focus on a still subject will lock the focus on that subject.
Page 79 Scene Intelligent Auto/Hybrid Auto (Fully Automatic) Scene Icons The camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen. For icon details, see = 507. Adjusting Settings by Touching the Screen By tapping icons on the screen, you can adjust settings.
Page 80 Scene Intelligent Auto/Hybrid Auto (Fully Automatic) Shooting with Effects Applied (Creative Assist) Press the <Q> button. Read the message and select [OK]. Select an effect. Use the < Y > < Z > keys to select an effect, then press < 0 >. Select the effect level and other details.
Page 81 Scene Intelligent Auto/Hybrid Auto (Fully Automatic) [ ] Brightness Adjust image brightness. [ ] Contrast Adjust contrast. [ ] Saturation Adjust the vividness of colors. ] Color tone 1 Adjust amber/blue color tone. ] Color tone 2 Adjust green/magenta color tone. ] Monochrome Set the toning effect for monochrome shooting.
Page 82: Special Scene Mode
Special Scene Mode The camera will automatically choose the appropriate settings when you select a shooting mode for your subject or scene. Set the shooting mode switch to <z>. Tap the shooting mode icon. Select a shooting mode. Choose from [ J ], [ 2 ], [ K ], [ 3 ], [ 5 ], [ 4 ], [ P ], [ 6 ], [ F ], [ G ], or [ I ].
Page 83 Special Scene Mode Special Scene Mode Shooting Mode Page Shooting Mode Page J Self Portrait = 84 Food = 90 2 Portrait = 85 Night Portrait = 91 Smooth skin = 86 Handheld Night Scene = 92 3 Landscape = 87 HDR Backlight Control = 93 5 Sports...
Page 84: Self Portrait Mode
Self Portrait Mode To take shots of yourself, use [ J ] (Self Portrait) mode. Rotate the screen around toward the lens. Customizable image processing includes skin smoothing as well as brightness and background adjustment to make yourself stand out. Shooting Tips Set the brightness and smooth skin effect.
Page 85: Portrait Mode
Portrait Mode The [ 2 ] (Portrait) mode blurs the background to make the human subject stand out. It also makes skin tones and hair look softer. Shooting Tips Select the location where the distance between the subject and the background is the farthest. The further the distance between the subject and background, the more blurred the background will look.
Page 86: Smooth Skin Mode
Smooth Skin Mode Use [ K ] (Smooth skin) mode to make skin look more attractive. Image processing makes skin look smoother. Shooting Tips Enable the camera to detect faces. Frames are displayed around any main subjects detected for skin smoothing.
Page 87: Landscape Mode
Landscape Mode Use the [ 3 ] (Landscape) mode for expansive scenery or to have everything in focus from near to far. For vivid blues and greens, and very sharp and crisp images. Shooting Tips With a zoom lens, use the wide-angle end. When using a zoom lens, set the lens to the wide-angle end to make the objects near and far in focus.
Page 88: Sports Mode
Sports Mode Use the [ 5 ] (Sports) mode to shoot a moving subject, such as a running person or a moving vehicle. Shooting Tips Use a telephoto lens. Use of a telephoto lens is recommended to enable shooting from a distance.
Page 89: Close-Up Mode
Close-up Mode When you want to shoot flowers or small things up close, use the [ 4 ] (Close-up) mode. To make small things appear much larger, use a macro lens (sold separately). Shooting Tips Use a simple background. A simple background makes small objects such as flowers stand out better.
Page 90: Food Mode
Food Mode When you want to take pictures of food, use [ P ] (Food). The photo will look bright and appetizing. Also, depending on the light source, the reddish tinge will be suppressed in the pictures taken under tungsten lights, etc. Shooting Tips Change the color tone.
Page 91: Night Portrait Mode
Night Portrait Mode When you want to photograph people at night and obtain a natural-looking night scene in the background, use the [ 6 ] (Night Portrait) mode. Note that a flash is required for shooting. Using a tripod is recommended. Shooting Tips Use a wide-angle lens and a tripod.
Page 92: Handheld Night Scene Mode
Handheld Night Scene Mode The [ F ] (Handheld Night Scene) mode enables you to shoot night scenes even while handholding the camera. In this shooting mode, four shots are taken consecutively for each picture, and the resulting image with reduced camera shake is recorded.
Page 93: Hdr Backlight Control Mode
HDR Backlight Control Mode When shooting a scene having both the bright and dark areas, use the [ G ] (HDR Backlight Control) mode. When you take one picture in this mode, three consecutive shots are taken at different exposures. This results in one image, with a wide tonal range, that has minimized the clipped shadows caused by backlighting.
Page 94: Silent Mode
Silent Mode Where silence is needed, you can shoot without beeps or shutter release sounds. As you shoot, a white frame is momentarily displayed around the screen. Shooting Tips Take some test shots. Consider taking some test shots in advance, because lens aperture and focusing adjustment may be audible under some shooting conditions.
Page 95: Special Scene Mode Precautions
Special Scene Mode Precautions J : Self Portrait Areas other than people’s skin may be modified, depending on the shooting conditions. [Smooth skin effect] settings specified in [ J ] mode are not applied in [ K ] mode. [Background] is set to [Auto] and cannot be changed in [ I ] flash mode when you have raised the flash.
Page 96 Special Scene Mode Precautions 6 : Night Portrait (continued) When there is a risk of overexposure in flash photography, shutter speed or ISO speed is automatically adjusted to reduce loss of detail in highlights and shoot at standard exposure. In flash shots with certain lenses, shutter speeds and ISO speeds displayed when you press the shutter button halfway may not match the actual settings used.
Page 97 Special Scene Mode Precautions G : HDR Backlight Control Compared to other shooting modes, the image area will be smaller. RAW image quality cannot be set. Flash photography is not possible. Note that the image may not be rendered with a smooth gradation and may look irregular or have significant noise.
Page 98: Creative Filters Mode
Creative Filters Mode You can shoot with filter effects applied. You can preview filter effects before shooting. Set the shooting mode switch to <z>. Tap the shooting mode icon. Select a filter effect (shooting mode). Choose from [I], [G], [X], [ K ], [H], [c], [ A ], [ B ], [ C ], or [ D ].
Page 99 Creative Filters Mode RAW and RAW+JPEG are not available. When RAW image quality is set, images are captured with 73 image quality. When RAW+JPEG image quality is set, images are captured with the specified JPEG image quality. Continuous shooting is not available when [I], [G], [X], [ K ], [H], or [c] is set.
Page 100 Creative Filters Mode Creative Filter Characteristics I Grainy B/W Makes the image grainy and black and white. By adjusting the contrast, you can change the black-and-white effect. G Soft focus Gives the image a soft look. By adjusting the blur, you can change the degree of softness.
Page 101 Creative Filters Mode c Miniature effect Creates a diorama effect. Shooting under the default setting will keep the center looking sharp. You can move the area that looks sharp (the scene frame) as described in “Miniature Effect Operations” ( = 103). 1-point AF is used as the AF method.
Page 102 Creative Filters Mode [ A ], [ B ], [ C ], and [ D ] Notes Compared to other shooting modes, the image area will be smaller. Filter effect previews will not look exactly the same as your shots. If you shoot a moving subject, the subject’s movement may leave afterimages or the surrounding area of the subject may become dark.
Page 103 Creative Filters Mode Miniature Effect Operations Move the scene frame. Use the scene frame to set an area that will look sharp. To make the scene frame movable (displayed in orange), press the button or tap [ r ] in the lower right of the screen.
Page 104 Creative Filters Mode Take the picture. You can switch the scene frame orientation in step 1 with the < Y > < Z > keys when in horizontal orientation or the < W > < X > keys when in vertical orientation.
Page 105: Advanced Shooting Modes
Advanced Shooting Modes Advanced shooting modes ([ d ], [ s ], [ f ], and [ a ]) give you the freedom to shoot in a variety of ways by setting your preferred shutter speed, aperture value, exposure, and more. To clear the description displayed after shooting mode selection, press <...
Page 106: Program Ae Mode (P)
Program AE Mode (P) The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. * “ d ” stands for Program. * “AE” stands for Auto Exposure. Set the shooting mode to [d]. Focus on the subject. Aim the AF point over the subject and press the shutter button halfway.
Page 107 Program AE Mode (P) Differences Between [ d ] and [ A ] Modes In [ A ] mode, many functions, such as the AF method and metering mode, are set automatically to prevent spoiled shots. The functions you can set are limited.
Page 108: Shutter-Priority Ae Mode (Tv)
Shutter-priority AE Mode (Tv) In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the standard exposure matching the brightness of the subject. A faster shutter speed can freeze the action of a moving subject. A slower shutter speed can create a blurred effect, giving the impression of motion.
Page 109 Shutter-priority AE Mode (Tv) If the lowest f/number blinks, it indicates underexposure. Turn the <6> dial to set a slower shutter speed until the aperture value stops blinking or set a higher ISO speed. If the highest f/number blinks, it indicates overexposure. Turn the <6> dial to set a faster shutter speed until the aperture value stops blinking or set a lower ISO speed.
Page 110: Aperture-Priority Ae Mode (Av)
Aperture-priority AE Mode (Av) In this mode, you set the desired aperture and the camera sets the shutter speed automatically to obtain the standard exposure matching the subject brightness. A higher f/number (smaller aperture hole) will make more of the foreground and background fall within acceptable focus.
Page 111 Aperture-priority AE Mode (Av) If the “30"” shutter speed blinks, it indicates underexposure. Turn the <6> dial to set a larger aperture (lower f/number) until the shutter speed blinking stops or set a higher ISO speed. If the “1/4000” shutter speed blinks, it indicates overexposure. Turn the <6> dial to set a smaller aperture (higher f/number) until the shutter speed blinking stops or set a lower ISO speed.
Page 112: Manual Exposure Mode (M)
Manual Exposure Mode (M) In this mode, you set both the shutter speed and aperture as desired. To determine the exposure, refer to the exposure level indicator or use a commercially available exposure meter. * “ a ” stands for Manual. Set the shooting mode to [a].
Page 113 Manual Exposure Mode (M) Set the exposure and take the picture. Check the exposure level indicator and set the desired shutter speed and aperture value. Exposure Compensation with ISO Auto If the ISO speed is set to [AUTO] for manual exposure shooting, you can set exposure compensation ( = 139) as follows: Touch the exposure level indicator [z: Exposure comp.]...
Page 114 Manual Exposure Mode (M) Long (Bulb) Exposures In this mode, the shutter stays open as long as you hold down the shutter button completely, and closes when you let go of the shutter button. Use bulb exposures for night scenes, fireworks, the heavens, and other subjects requiring long exposures.
Page 115 Manual Exposure Mode (M) Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Long bulb exposures produce more noise in the image than usual. If ISO Auto is set, ISO 400 will be set ( = 496).
Page 117: Shooting Settings
Shooting Settings This chapter describes shooting and introduces menu settings on the [z: Shooting settings] tab.
Page 118: Still Photo Shooting
Still Photo Shooting A M icon to the right of a page title indicates that the function is available only in advanced shooting modes ([ d ], [ s ], [ f ], or [ a ]).
Page 119: Tab Menus: Still Photo Shooting
Tab Menus: Still Photo Shooting Shooting settings 1 = 105 = 124 = 127 = 129 = 130 = 250 Shooting settings 2 = 135 = 139 = 140 = 238 = 143 = 144 Shooting settings 3 = 145 = 147 = 148...
Page 120 Tab Menus: Still Photo Shooting Shooting settings 4 = 149 = 152 = 154 = 155 = 156, 159, 162 Shooting settings 5 = 164 = 165 = 167 Shooting settings 6 = 169 = 172 = 182 = 183 = 184...
Page 121 Tab Menus: Still Photo Shooting Shooting settings 7 = 185 = 186 = 189 = 190 Shooting settings 8 = 207 = 215 = 233 = 241...
Page 122 Tab Menus: Still Photo Shooting The following screens are displayed in [ A ], [ D ], Special scene, and Creative filters modes. Shooting settings 1 = 74, 82, 98 = 124 = 127 = 129 = 250 = 135 Shooting settings 2 = 80 = 192...
Page 123 Tab Menus: Still Photo Shooting Shooting settings 4 = 186 = 189 = 190 Shooting settings 5 = 207 = 215 = 233 Available setting items vary depending on shooting mode. [Retain Creative Assist data] is available in [ A ] mode. [Digest type] is available in [ D ] mode.
Page 124: Image Quality
Image Quality You can select the pixel count and the image quality. Select [z: Image quality]. Set the image quality. To select the RAW quality, turn the <6> dial, and to select the JPEG quality, press the < Y > < Z > keys. Press <...
Page 125 If a previous version of DPP Ver.4.x is installed on your computer, obtain and install the latest version of DPP from the Canon website to update it ( = 474). (The previous version will be overwritten.) Note that DPP Ver.3.x or earlier cannot process RAW images taken with this camera.
Page 126 Image Quality Maximum Burst for Continuous Shooting The estimated maximum burst is shown on the top of the shooting screen. If the maximum burst is displayed as “99”, it indicates that you can shoot 99 or more shots continuously. The value starts decreasing once it reaches 98 or less.
Page 127: Still Image Aspect Ratio
Still Image Aspect Ratio You can change the image’s aspect ratio. Select [z: Still img aspect ratio]. Set the aspect ratio. Select an aspect ratio, then press < 0 >. JPEG images The images will be recorded with the set aspect ratio. RAW images The images will always be recorded in the [3:2] aspect ratio.
Page 128 Still Image Aspect Ratio Aspect Ratio 16:9 When you play back RAW images shot in the [4:3], [16:9], or [1:1] aspect ratio, they will be displayed with lines indicating the respective aspect ratio. (These lines are not recorded in the image.)
Page 129: Image Review Time
Image Review Time You can change how long images are displayed after shots. Set to [Hold] to keep shots displayed immediately after you shoot, or set to [Off] if you prefer not to have shots displayed. Select [z: Image review]. Set a time option.
Page 130: Lens Aberration Correction
Lens Aberration Correction Vignetting, image distortion, and other issues may be caused by lens optical characteristics. The camera can compensate for these phenomena by using [Lens aberration correction]. Select [z: Lens aberration correction]. Select an item. Select [Enable]. Confirm that the name of the attached lens and (except for diffraction correction) [Correction data available] are displayed.
Page 131 Lens Aberration Correction Peripheral Illumination Correction Vignetting (dark image corners) can be corrected. Depending on shooting conditions, noise may appear on the image periphery. The higher the ISO speed, the lower the correction amount will be. The correction amount applied will be lower than the maximum correction amount that applied with Digital Photo Professional (EOS software).
Page 132 Lens Aberration Correction Digital Lens Optimizer Various aberrations from lens optical characteristics can be corrected, along with diffraction and low-pass filter-induced loss of clarity. If [Correction data not available] or [ ] is displayed by [Digital Lens Optimizer], you can use EOS Utility to add the lens correction data to the camera.
Page 133 Lens Aberration Correction Chromatic Aberration Correction Chromatic aberration (color fringing around subjects) can be corrected. [Chromatic aberr corr] is not displayed when [Digital Lens Optimizer] is enabled. Diffraction Correction Diffraction (loss of sharpness caused by the aperture) can be corrected. Depending on shooting conditions, noise may be intensified together with the effects of correction.
Page 134 JPEG images already taken. When using a non-Canon lens, setting the corrections to [Disable] is recommended even if [Correction data available] is displayed. Magnifying the periphery of the image may display parts of the image that will not be recorded.
Page 135: Drive Mode
Drive Mode Single and continuous drive modes are provided. You can select the drive mode suiting the scene or subject. Select [z: Drive mode]. Set the drive mode. [ u ] Single shooting When you press the shutter button completely, only one shot will be taken.
Page 136 Drive Mode [ m / Q ] Self-timer: 10 sec./remote control [ l ] Self-timer: 2 sec. [ q ] Self-timer: Continuous shooting For self-timer shooting, see = 137. For remote control shooting, see = 193. Conditions for maximum continuous shooting speed ( = 135) are as follows: shooting with a fully charged battery at a 1/1000 sec.
Page 137: Self-Timer
Self-Timer Use the self-timer when you want to be in the picture such as a commemorative photograph. Select [z: Drive mode]. Select the self-timer. m ( Q ): Shoot in 10 sec. l : Shoot in 2 sec. q : Shoot continuously in 10 sec. for the specified number of shots* * Press the <...
Page 138 Self-Timer With [ q ], the shooting interval may become longer under some shooting conditions, such as image quality, use of flash, and other factors. [ I ] enables you to shoot without touching the camera mounted on a tripod. This prevents camera shake if you shoot still-life or long exposures.
Page 139: Exposure Compensation
Exposure Compensation Exposure compensation can brighten (increased exposure) or darken (decreased exposure) the standard exposure set by the camera. Exposure compensation can be set in the [ d ], [ s ], [ f ], and [ a ] shooting modes. You can set exposure compensation up to ±3 stops in 1/3- stop increments.
Page 140: Iso Speed Settings
ISO Speed Settings Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. ISO speed is set automatically in [ A ], [ D ], Special scene, and Creative filters modes. Regarding the ISO speed during movie recording, see = 501. ISO Speed Tap the ISO speed icon.
Page 141 ISO Speed Settings ISO Speed Guide Low ISO speeds reduce image noise but may increase the risk of camera/subject shake or reduce the area in focus (shallower depth of field), in some shooting conditions. High ISO speeds enable low-light shooting, a larger area in focus (deeper depth of field), and longer flash range but may increase image noise.
Page 142 ISO Speed Settings Max for Auto The maximum ISO speed for the ISO Auto range can be set between ISO 400 and ISO 25600. Select [zISO speed settings]. Select [Max for Auto]. Set the maximum ISO speed. Select the ISO speed, then press <...
Page 143: Auto Lighting Optimizer
Auto Lighting Optimizer Brightness and contrast can be corrected automatically if shots look dark or contrast is too low or high. Select [z: Auto Lighting Optimizer]. Set a correction option. Noise may increase and clarity may change, under some shooting conditions. If the effect of Auto Lighting Optimizer is too strong and results are not at your preferred brightness, set to [Low] or [Disable].
Page 144: Highlight Tone Priority
Highlight Tone Priority You can reduce overexposed, clipped highlights. Select [z: Highlight tone priority]. Set an option. [Enable]: Improves gradation in highlights. The gradation between the grays and highlights becomes smoother. [Enhanced]: Reduces overexposed highlights even more than [Enable], under some shooting conditions. Noise may increase slightly.
Page 145: Metering Mode
Metering Mode You can select one of four methods to measure the subject brightness. Evaluative metering is set automatically in [ A ], [ D ], Special scene, and Creative filters modes (except [X]). Select [z: Metering mode]. Set the metering mode. [ q ] Evaluative metering General-purpose metering mode suited even for backlit subjects.
Page 146 Metering Mode By default, the camera will set the exposure as follows. With [ q ], holding down the shutter button halfway will lock the exposure setting (AE lock) after focus is achieved with One-Shot AF. In the [ w ], [ r ], and [ e ] modes, the exposure is set at the moment the picture is taken.
Page 147: Metering Timer
Metering Timer You can set how long the metering timer runs (which determines the duration of exposure display) after it is triggered by an action such as pressing the shutter button halfway. Select [z: Metering timer]. Set a time option.
Page 148: Exposure Simulation
Exposure Simulation Exposure simulation simulates and displays how the brightness (exposure) of the actual image will look. Select [z: Expo. simulation]. Set an option. Enable (g) The displayed image brightness will be close to the actual brightness (exposure) of the resulting image. If you set exposure compensation, the image brightness will change accordingly.
Page 149: White Balance
White Balance White balance (WB) is for making the white areas look white. Normally, the Auto [ Q ] (Ambience priority) or [ Q w] (White priority) setting will obtain the correct white balance. If natural-looking colors cannot be obtained with Auto, you can select the white balance to match the light source or set it manually by shooting a white object.
Page 150 White Balance White Balance To the human eye, a white object looks white regardless of the type of lighting. With a digital camera, the white for color correction basis is decided depending on the color temperature of the illumination, and then the color is adjusted with software to make the white areas look white.
Page 151 White Balance [ Q ] Auto White Balance With [ Q ], you can slightly increase the intensity of the image’s warm color cast when shooting a tungsten-light scene. If you select [ Q w], you can reduce the intensity of the image’s warm color cast. Select [z: White balance].
Page 152 White Balance [ O ] Custom White Balance With custom white balance, you can manually set the white balance for the specific light source of the shooting location. Make sure to perform this procedure under the light source at the actual location of the shoot. Shoot a white object.
Page 153 White Balance If the exposure obtained in step 1 differs greatly from the standard exposure, a correct white balance may not be obtained. These images cannot be selected: Images captured with Picture Style set to [Monochrome], images with a Creative filter applied before or after shooting, cropped images, or images shot with another camera.
Page 154: White Balance Correction
White Balance Correction White balance correction has the same effect as using a commercially available color temperature conversion filter or color compensating filter. Select [z: WB correction]. Set the white balance correction. Press the < V > cross keys to move the ] mark to your preferred position.
Page 155: Color Space
Color Space The range of reproducible colors is called “color space”. For normal shooting, sRGB is recommended. Select [z: Color space]. Set a color space option. Adobe RGB This color space is mainly used for commercial printing and other industrial uses.
Page 156: Picture Style Selection
Picture Style Selection Just by selecting a preset Picture Style, you can obtain image characteristics effectively matching your photographic expression or the subject. Select [z: Picture Style]. Select a Picture Style. Picture Style Characteristics [ D ] Auto The color tone will be adjusted automatically to suit the scene. The colors will look vivid for blue skies, greenery and sunsets, particularly in nature, outdoor and sunset scenes.
Page 157 Picture Style Selection [ R ] Landscape For vivid blues and greens, and very sharp and crisp images. Effective for impressive landscapes. [ u ] Fine Detail Suited for detailed outline and fine texture description of the subject. The colors will be slightly vivid. [ S ] Neutral Suited for processing the image with a computer.
Page 158 Picture Style Selection Symbols The Picture Style selection screen has icons for [Strength], [Fineness], or [Threshold] for [Sharpness] as well as [Contrast] and other settings. The numbers indicate the values for these settings specified for the respective Picture Style. Sharpness Strength Fineness Threshold...
Page 159: Picture Style Customization
Picture Style Customization You can customize any Picture Style by changing it from the default settings. To customize [Monochrome], see = 161. Select [z: Picture Style]. Select a Picture Style. Select the Picture Style to adjust, then tap [Detail set.]. Select a setting item.
Page 160 Picture Style Customization Settings and Effects Sharpness A Strength 0: Weak outline emphasis 7: Strong outline emphasis B Fineness* 1: Fine 5: Grainy C Threshold* 1: Low 5: High h Contrast –4: Low contrast +4: High contrast i Saturation –4: Low saturation +4: High saturation j Color tone –4: Reddish skin tone...
Page 161 Picture Style Customization [ V ] Monochrome Adjustment Besides the effects described on the preceding page such as [Contrast], or [Strength], [Fineness] and [Threshold] for [Sharpness], you can also set [Filter effect] and [Toning effect]. [ k ] Filter effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.
Page 162: Picture Style Registration
Picture Style Registration You can select a base Picture Style such as [Portrait] or [Landscape], adjust it as desired, and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. Useful when creating several Picture Styles with different settings.
Page 163 Picture Style Registration Select an item. Set the effect level. For details, see “Picture Style Customization” ( = 159). Press the <M> button to save the adjusted setting and return to the Picture Style selection screen. The base Picture Style will be indicated on the right of [User Def.
Page 164: Long Exposure Noise Reduction
Long Exposure Noise Reduction For images exposed for 1 sec. or longer, noise (dots of light and banding) typical of long exposures can be reduced. Select [z: Long exp. noise reduction]. Set a reduction option. [AUTO] Auto For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected.
Page 165: High Iso Speed Noise Reduction
High ISO Speed Noise Reduction This function reduces the noise generated in the image. This function is especially effective when shooting at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced.
Page 166 High ISO Speed Noise Reduction Cautions for Setting Multi Shot Noise Reduction If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller. If you are handholding the camera, keep it steady to prevent camera shake. Using a tripod is recommended.
Page 167: Touch Shutter
Touch Shutter Just by tapping on the screen, you can focus and take the picture automatically. Enable the Touch Shutter. Tap [y] on the screen’s bottom right. Each time you tap on the icon, it will toggle between [y] and [x]. [x] (Touch Shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken.
Page 168 Touch Shutter Even if you set the drive mode to [ i ], the camera will still shoot in the single shooting mode. Even if [AF operation] is set to [Servo AF], tapping on the screen will focus on the image with [One-Shot AF]. Tapping on the screen in magnified view will not focus or take the picture.
Page 169: Af Operation
AF Operation You can select the AF operation characteristics to suit the shooting conditions or subject. Select [z: AF operation]. Select a setting item. If focus cannot be achieved, the AF point will turn orange. If this occurs, the picture cannot be taken even if the shutter button is pressed completely. Recompose the shot and try to focus again.
Page 170 AF Operation One-Shot AF for Still Subjects (ONE SHOT) This AF operation is suited for still subjects. When you press the shutter button halfway, the camera will focus only once. When focus is achieved, the AF point will turn green and the beeper will sound.
Page 171 AF Operation AF-Assist Beam The AF-assist beam ( = 36) may fire when you press the shutter button halfway under low light or in similar conditions, to make autofocusing easier. The AF-assist beam does not fire when [z: AF operation] is set to [Servo AF].
Page 172: Af Method
AF Method You can select the AF method to suit the shooting conditions or subject. The camera attempts to focus on faces of any people in an AF point or Zone AF frame. In [ A ], [ D ] or [ J ] mode, [u+Tracking] is set automatically. For instructions on selecting an AF method, see = 174.
Page 173 AF Method : Zone AF Uses auto selection AF in Zone AF frames to cover a large area, which makes focusing easier than with 1-point AF. Prioritizes focusing on the nearest subject. Faces of any people in the Zone AF frame are also given priority in focusing. AF points in focus are displayed with [S].
Page 174 AF Method Selecting the AF Method You can select the AF method to suit the shooting conditions or subject. If you prefer to focus manually, see = 187. Select [z: AF method]. Select a setting item. The descriptions on = 175– = 177 assume that the AF operation is set to [One-Shot AF] ( = 170).
Page 175 AF Method u(face)+Tracking: c The camera detects and focuses on human faces. If a face moves, the AF point [p] also moves to track the face. Check the AF point. [p] (an AF point) appears over any face detected. Focus on the subject. Once you press the shutter button halfway and the subject is in focus, the AF point turns green and the camera...
Page 176 AF Method Tapping a Face for Focus Tapping a face or subject to focus on changes the AF point to [ ] and focuses where you tap. Even if the face or subject moves on the screen, the AF point [ ] moves to track it.
Page 177 AF Method Spot AF/1-point AF/Zone AF You can manually set the AF point or Zone AF frame. Here, 1-point AF screens are used as an example. Check the AF point. The AF point (1) will appear. With Zone AF, the Zone AF frame is displayed.
Page 178 AF Method The camera will keep moving the active AF point [S] to track subjects for Zone AF when Servo AF operation is used, but under some shooting conditions (such as when subjects are small), it may not be possible to track the subject. Focusing with an AF-assist beam may be difficult with AF points near the edge of the screen.
Page 179 AF Method Magnified View You can check the focus by tapping [ u ] to magnify display by approx. 5× or 10×. Magnified view is not possible with [u+Tracking]. Magnification is centered on the AF point for [Spot AF] or [1-point AF] and on the Zone AF frame for [Zone AF].
Page 180 AF Method AF Shooting Tips Even when focus is achieved, pressing the shutter button halfway will focus again. Image brightness may change during autofocusing. Depending on the subject and shooting conditions, it may take longer to focus, or the continuous shooting speed may decrease. If the light source changes as you shoot, the screen may flicker, and focusing may be difficult.
Page 181 AF Method Shooting Conditions that Make Focusing Difficult Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped. Subjects in low light. Stripes and other patterns where there is contrast only in the horizontal direction.
Page 182: Eye Detection Af
Eye Detection AF With the AF method set to [u+Tracking], the camera can focus on people’s eyes. Select [z: Eye Detection AF]. Select [Enable]. Aim the camera at the subject. An AF point is displayed around their eye. You can tap the screen to select an eye for focus.
Page 183: Continuous Af
Continuous AF This function keeps subjects generally in focus. The camera is ready to focus immediately when you press the shutter button halfway. Select [z: Continuous AF]. Select [Enable]. Enabling this function reduces the number of shots available, because the lens is driven continuously and battery power is consumed.
Page 184: Focus Mode
Focus Mode You can specify the method of focusing (focus mode) when using EF-M lenses. Select [z: Focus mode]. Select a setting item. [AF]: Autofocus [MF]: Manual focus...
Page 185: Manually Focusing With A Lens After Af
Manually Focusing with a Lens after AF For EF-M, EF, or EF-S lenses equipped with electronic manual focusing, you can specify how manual focus adjustment is used with One-Shot AF. Select [z: Lens electronic MF]. Select an item. ] Disable after One-Shot AF Manual focus adjustment after the AF operation is disabled.
Page 186: Af-Assist Beam Firing
AF-Assist Beam Firing You can enable firing of the camera’s AF-assist beam. Select [z: AF-assist beam firing]. Select an item. [ON] Enable Enables firing of the AF-assist beam, when needed. [OFF] Disable Disables firing of the AF-assist beam. Set if you prefer not to fire the AF- assist beam.
Page 187: Manual Focus
Manual Focus If focusing is not possible with autofocus, you can magnify the image and focus manually. Set [z: Focus mode] to [MF]. Turn the lens focusing ring to focus roughly. Magnify the image. Each tap of [ u ] changes the screen, as follows.
Page 188 Manual Focus Focus manually. While looking at the magnified image, turn the lens focusing ring to focus. After achieving focus, tap [ u ] to return to the normal view. Take the picture. When using non EF-M lenses, set the lens’s focus mode switch to <MF> in step 1.
Page 189: Setting Mf Peaking
Setting MF Peaking Edges of subjects in focus can be displayed in color as you focus manually to make it easier to focus. You can set the outline color and adjust the sensitivity (level) of edge detection. Select [z: MF peaking settings]. Select [Peaking].
Page 190: Image Stabilization
Image Stabilization You can adjust the Image Stabilizer (IS) setting when using IS-equipped EF-M lenses. For details on [k Digital IS], see = 235. Select [z: IS settings]. Select [IS mode]. Set an option. [Off] Deactivates image stabilization. [On] Camera shake will be corrected. [IS mode] is not displayed for IS-equipped EF or EF-S lenses.
Page 191: Exposure Lock (Ae Lock)
Exposure Lock (AE Lock) You can lock the exposure when you want to set the focus and exposure separately or when you are to take multiple shots at the same exposure setting. Press the <A> button to lock the exposure, then recompose and take the picture.
Page 192: Type Of Digest Movie
Type of Digest Movie Both still photos and clips are captured when you shoot in [ D ] mode, but you can specify whether to include the still photos in the resulting digest movie. Set the shooting mode to [D]. Select [z: Digest type].
Page 193: Remote Control Shooting
Remote Control Shooting You can shoot remotely by using an optional Wireless Remote Control BR- E1, which pairs via Bluetooth. Wireless Remote Control BR-E1 You can shoot remotely up to approx. 5 meters/16.4 feet away from the camera. After pairing the camera and BR-E1 ( = 389), set the drive mode to [ Q ] ( = 136).
Page 194: General Still Photo Shooting Cautions
General Still Photo Shooting Cautions Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. Image Quality When you shoot at high ISO speeds, noise (such as dots of light and banding) may become noticeable.
Page 195 General Still Photo Shooting Cautions Images and Display Under low- or bright-light conditions, the displayed image may not reflect the brightness of the captured image. Under low light, noise may be noticeable in image display even at low ISO speeds, but there will be less noise in your shots, because image quality varies between display and captured images.
Page 196 General Still Photo Shooting Cautions Information Display For details on the icons displayed for still photo shooting, see = 503. When [g] is displayed in white, it indicates that the image is displayed at the brightness level closely matching that of the actual image to be captured. If [g] is blinking, it indicates that the image is displayed at a brightness that differs from the actual shooting result because of low- or bright-light conditions.
Page 197: Movie Recording
Movie Recording For movie recording, set the shooting mode switch to <k>. You can record movies by pressing the movie shooting button during still photo shooting. You can specify movie recording mode in [z: Shooting mode] after setting the shooting mode switch to <k>.
Page 198: Tab Menus: Movie Recording
Tab Menus: Movie Recording Shooting settings 1 = 200 = 207 = 214 = 215 = 130 Shooting settings 2 = 193 = 217 = 226 Shooting settings 3 = 139 = 238 = 143 = 144 = 147...
Page 199 Tab Menus: Movie Recording Shooting settings 4 = 149 = 152 = 154 = 156, 159, 162 Shooting settings 5 = 172 = 182 = 233 = 184 = 240 Shooting settings 6 = 185 = 189 = 190 = 241...
Page 200: Movie Mode
Movie Mode [k] Autoexposure Recording Autoexposure control will take effect to suit the scene’s current brightness. Set the shooting mode switch to <k>. Tap the shooting mode icon. Set the shooting mode to [k]. Select [k] (Movie auto exposure), then press <...
Page 201 Movie Mode Record the movie. Press the movie shooting button to start recording a movie. While the movie is being recorded, the [oREC] mark (1) will be displayed on the upper right of the screen. Sound is recorded by the microphones at the positions indicated (2).
Page 202 Movie Mode [M] Manual Exposure Recording You can manually set the shutter speed, aperture, and ISO speed for movie recording. Set the shooting mode switch to <k>. Set the shooting mode to [M]. Select [M] (Movie manual exposure), then press < 0 >. Set the ISO speed (=204).
Page 203 Movie Mode Focus and record the movie. The procedure is the same as steps 4 and 5 for “[k] Autoexposure Recording” ( = 200). Double-check camera settings before recording movies if you change the shooting mode switch from < A > or <z> to <k>. During movie recording, avoid changing the shutter speed or aperture.
Page 204 Movie Mode ISO Speed for [Movie manual exp.] You can set the ISO speed manually or select [AUTO] to set it automatically. For details on the ISO speed, see = 501. Still Photo Shooting Still photos cannot be taken in movie modes. To shoot still photos, set the shooting mode switch to <...
Page 205 Movie Mode Cautions for Movie Recording Do not point the camera toward an intense light source, such as the sun or an intense artificial light source. Doing so may damage the image sensor or the camera’s internal components. If you shoot something that has fine detail, moire or false colors may result. If [ Q ] or [ Q w] is set and the ISO speed or aperture changes during movie recording, the white balance may also change.
Page 206 Movie Mode Notes for Movie Recording Each time you record a movie, a new movie file is created on the card. The movie’s field of view coverage for recording 4K, Full HD, and HD movies is approx. 100%. To enable starting or stopping movie recording by pressing the shutter button completely, set [Fully-press] for [ 5 : Shutter btn function for movies] to [Start/stop mov rec].
Page 207: Movie Recording Quality
Movie Recording Quality On the [z: Movie rec quality] tab, select [Movie rec. size] to set the image size, frame rate, and compression method. The movie will be recorded as an MP4 file. The frame rate displayed on the [Movie rec.
Page 208 Movie Recording Quality 4K Movie Recording Recording 4K movies requires a high-performance card. For details, see “Cards that Can Record Movies” ( = 499). The maximum recording time per 4K movie is 9 min. 59 sec. ( = 213). Recording 4K movies greatly increases the processing load, which may cause the camera’s internal temperature to increase faster or become higher than for regular movies.
Page 209 Movie Recording Quality Frame Rate (fps: frame per second) [ 2 ] 119.88fps/[8] 59.94fps/[6] 29.97fps For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.). [ 3 ] 100.00fps/[7] 50.00fps/[5] 25.00fps For areas where the TV system is PAL (Europe, Russia, China, Australia, etc.).
Page 210 Movie Recording Quality Cards that Can Record Movies For details on cards you can use for various movie recording sizes, see = 499. When recording movies, use a high-capacity card with a writing and reading speed (as specified in card performance requirements) shown in the table on = 499 or higher than the standard specification.
Page 211 Movie Recording Quality High Frame Rate You can record HD movies at a high frame rate of 119.88 fps or 100.00 fps by setting [High Frame Rate] under [z: Movie rec quality] to [Enable]. This is ideal for recording movies that will be played back in slow motion. The maximum recording time per movie is 7 min.
Page 212 Movie Recording Quality Movie Files Exceeding 4 GB Even if you record a movie exceeding 4 GB, you can keep recording without interruption. Using SD/SDHC cards formatted with the camera If you use the camera to format an SD/SDHC card, the camera will format it in FAT32.
Page 213 Movie Recording Quality Total Movie Recording Time and File Size Per Minute For details on file sizes and the recording time available at each movie recording size, see = 500. Movie Recording Time Limit When recording 4K movies The maximum recording time per movie is 9 min. 59 sec. Once 9 min. 59 sec.
Page 214: Movie Self-Timer
Movie Self-Timer Movie recording can be started by the self-timer. Select z [Movie self-timer]. Select an item. Record the movie. After you tap [o] or press the movie shooting button, the camera beeps and displays number of seconds left before recording.
Page 215: Sound Recording
Sound Recording You can record movies while recording sound with the built-in stereo microphone. You can also freely adjust the sound- recording level. Use [z: Sound recording] to set sound recording functions. Sound Recording/Sound-Recording Level Auto The sound-recording level is adjusted automatically. Auto level control will take effect automatically in response to the sound level.
Page 216 Sound Recording Attenuator Automatically suppresses sound distortion caused by loud noises. Even if [Sound rec.] is set to [Auto] or [Manual] for recording, sound distortion may still result if there is a very loud sound. In this case, setting it to [Enable] is recommended.
Page 217: Time-Lapse Movies
Time-lapse Movies Images shot at a set interval can be stitched together automatically to create a 4K or Full HD time-lapse movie. A time-lapse movie shows how a subject changes in a much shorter period of time than the actual time it took. It is effective for a fixed-point observation of changing scenery, growing plants, celestial motion, etc.
Page 218 Time-lapse Movies Set the shooting interval. Select [Interval/shots]. Select [Interval] (sec.). Use the < Y > < Z > keys to set a value. Refer to [k: Time required] (1) and [ 3 : Playback time] (2) to set the number.
Page 219 Time-lapse Movies Select the desired movie recording size. H (3840×2160) The movie is recorded in 4K quality. The aspect ratio is 16:9. The frame rate is 29.97 fps (6) for NTSC and 25.00 fps (5) for PAL, and movies are recorded in MP4 (C) format with ALL-I (W) compression. L (1920×1080) The movie is recorded in Full High-Definition (Full HD) quality.
Page 220 Time-lapse Movies Configure [Auto exposure]. Fixed 1st frame When taking the first shot, metering is performed to set the exposure automatically to match the brightness. The exposure setting for the first shot will be applied to subsequent shots. Other shooting-related settings for the first shot will also be applied for subsequent shots.
Page 221 Time-lapse Movies Set the beeper. Select [Beep as img taken]. If [Disable] is set, the beeper will not sound for shooting. Check the settings. (1) Time required Indicates the time required to shoot the set number of shots with the set interval.
Page 222 Time-lapse Movies Close the menu. Press the <M> button to turn off the menu screen. Record the time-lapse movie. Press the shutter button halfway to check the focus and exposure. Press the <o> button to start time- lapse movie recording. The number of shots remaining is displayed (1).
Page 223 Time-lapse Movies If the card does not have enough free space to record the set number of shots, [Playback time] will be displayed in orange. Although the camera can continue shooting, the shooting will stop when the card becomes full. If the movie file size exceeds 4 GB with the [No.
Page 224 Time-lapse Movies If the next scheduled shot is not possible, it will be skipped. This may shorten the recording time of the created time-lapse movie. If the time it takes to record to the card exceeds the shooting interval due to the shooting functions set or card performance, some of the shots may not be taken with the set intervals.
Page 225 Time-lapse Movies Using a tripod is recommended. Recording test movies for time-lapse movies beforehand is recommended. The movie’s field of view coverage for both the 4K and Full HD time-lapse movie recording is approx. 100%. To cancel the time-lapse movie recording, press the <o> button. The time- lapse movie shot so far will be recorded on the card.
Page 226: Video Snapshots
Video Snapshots Record a series of short video snapshots, each a few seconds long, and the camera will combine them to create a video snapshot album that shows these highlights of your trip or event. Video snapshots are available when the movie recording size is set to L6X (NTSC) / L5X (PAL).
Page 227 Video Snapshots Select [Album settings]. Select [Create a new album]. Read the message and select [OK]. Specify the playback time. Specify playback time per video snapshot. Specify the playback effect. This setting determines how fast albums are played back. Check the required recording time. The time required to record each video snapshot is indicated (1), based on the playback time and effect.
Page 228 Video Snapshots Close the menu. Press the <M> button to close the menu. A blue bar is displayed to indicate the recording time (2). ( 2 ) Record the first video snapshot. Press the movie shooting button to start recording. The blue bar indicating recording time gradually decreases, and after the specified time elapses, recording stops...
Page 229 Video Snapshots Stop recording video snapshots. Set [Video snapshot] to [Disable]. To return to normal movie recording, be sure to specify [Disable]. Press the <M> button to close the menu and return to normal movie recording. Options in Steps 11 and 12 Function Description Saves the clip as the first video snapshot in an...
Page 230 Video Snapshots Adding to an Existing Album Select [Add to existing album]. Follow step 5 on = 227 to select [Add to existing album]. Select an existing album. Use the < Y > < Z > keys to select an existing album, then press <...
Page 231: Miniature Effect Movie
Miniature Effect Movie By blurring image areas outside a selected area, you can record movies with a miniature model effect applied. By choosing the playback speed before the movie is recorded, you can also make movies that look like scenes happening in miniature models, with people and objects in the scene moving quickly during playback.
Page 232 Miniature Effect Movie Move the AF point. The AF point turns orange and can be moved. Press the < V > cross keys to move the AF point to the position to focus on. Aligning the AF point and scene frame is recommended.
Page 233: Movie Servo Af
Movie Servo AF With this function enabled, the camera focuses on the subject continuously during movie recording. Select [z: Movie Servo AF]. Select [Enable]. When [Enable] is set: The camera focuses on the subject continuously even when you are not pressing the shutter button halfway. To keep the focus at a specific position, or if you prefer not to record mechanical sounds from the lens, you can temporarily stop Movie Servo AF by tapping [ Z ] in the lower left of the screen.
Page 234 Movie Servo AF Cautions When [Movie Servo AF] is Set to [Enable] Shooting Conditions that Make Focusing Difficult y A fast-moving subject approaching or moving away from the camera. y A subject moving at a close distance to the camera. y When shooting with a higher f/number.
Page 235: Movie Digital Is
Movie Digital IS In-camera image stabilization electronically corrects camera shake during movie recording. This function is called “Movie digital IS”. When using a lens with built-in optical Image Stabilizer, set the lens’s Image Stabilizer switch to <1>. Select [z: IS settings]. Select [k Digital IS].
Page 236 (the subject momentarily looks out of focus) due to the effects of the Movie digital IS. When using a TS-E lens, fish-eye lens, or non-Canon lens, setting Movie digital IS to [Disable] is recommended. Since Movie digital IS magnifies the image, the image looks more grainy. Noise, dots of light, etc.
Page 237: Other Menu Functions
Other Menu Functions [z1] Shooting mode Available options include autoexposure and manual exposure movie recording. Lens aberration correction Peripheral illumination and chromatic aberration can be corrected as you record movies. For details on lens aberration correction, see = 130. [z2] Remote control shooting When [Enable] is set, you can start or stop movie recording using Wireless Remote Control BR-E1 (sold separately).
Page 238 Other Menu Functions [z3] Exposure compensation Exposure compensation is available in a range of ±3 stops, in 1/3-stop increments. For details on exposure compensation, see = 139. k ISO speed settings ISO speed In [M] mode, you can set the ISO speed manually. You can also select ISO Auto.
Page 239 Other Menu Functions [z4] White balance For details on white balance, see = 149. Custom White Balance For details on custom white balance, see = 152. White balance correction For details on white balance correction, see = 154. Picture Style For details on Picture Styles, see = 156.
Page 240 Other Menu Functions HDMI information display You can configure information display for image output via an HDMI cable. With info The image, shooting information, AF points, and other information is shown on the other device via HDMI. Note that the camera screen goes off.
Page 241 Other Menu Functions k Auto slow shutter You can choose whether to record movies that are brighter than when set to [Disable] by automatically slowing the shutter speed under low light. Applies when the frame rate of the movie recording size is 8 or 7. Disable Enables you to record movies with smoother, more natural movement, less affected by subject shake than when set to [Enable].
Page 242: General Movie Recording Cautions
General Movie Recording Cautions Red [E] Internal Temperature Warning Icon If the camera’s internal temperature increases due to prolonged movie recording or under a high ambient temperature, a red [E] icon will appear. The red [E] icon indicates that movie recording will soon be terminated automatically.
Page 243 General Movie Recording Cautions Recording and Image Quality If you use a card with a slow writing speed, an indicator may appear on the right of the screen during movie recording. It indicates how much data has not yet been written to the card (remaining capacity of the internal buffer memory).
Page 245: Flash Photography
Flash Photography This chapter describes how to shoot with flash. Flash cannot be used while you are recording movies.
Page 246: Flash Photography
Flash Photography Using flash is recommended when the [ I ] icon is displayed on the screen, when subjects in daytime shots are backlit, or when you shoot under low light. Use the lever to raise the flash. Press the shutter button halfway. Confirm that a [ I ] icon appears on the screen.
Page 247 Flash Photography Shutter Speed and Aperture Value in Flash Photography Shooting Mode Shutter Speed Aperture Value Auto (1/200–30 sec.)* Automatically set Manual (1/200–30 sec.) Automatically set Auto (1/200–30 sec.)* Manually set Manual (1/200–30 sec., Bulb) Manually set * When [Slow synchro] under [z: Flash control] is set to [1/200-30sec. auto]. Do not use the flash unless it is fully raised.
Page 248: Flash Exposure Compensation
Flash Exposure Compensation Just as exposure compensation is adjustable, you can also adjust flash output. Press <Z>. Press the <M> button. Select [2exp. comp.]. Set the compensation amount. To make flash exposure brighter, set the compensation amount toward [Brighter] (positive compensation), or to make it darker, set it toward [Darker] (negative compensation).
Page 249: Fe Lock
FE Lock Shooting with FE (flash exposure) Lock provides suitable flash exposure over your specified area of the subject. Use the lever to raise the flash. Press the shutter button halfway and confirm that a [ I ] icon appears on the screen.
Page 250: Flash Control
Flash Control Functions of the flash can be set from menu screens on the camera. Select [z: Flash control]. Select an item.
Page 251 Flash Control Flash Firing Set to [a] to have the flash fire automatically, based on shooting conditions. Set to [D] to have the flash always fire when you shoot. Set to [b] to disable flash firing. The information displayed varies by shooting mode. Can also be set (except in some shooting modes) by pressing the <D>...
Page 252 Flash Control Slow SynchroM You can set the flash-sync shutter speed for flash photography in [ f ] Aperture- priority AE or [ d ] Program AE mode. ] 1/200-30sec. auto The flash sync speed is set automatically within a range of 1/200 sec. to 30 sec.
Page 253 Flash Control Built-in Flash Function SettingsM Flash mode Set to [E-TTL II] to shoot in E-TTL II/E-TTL fully automatic flash mode. Set to [Manual flash] to specify your preferred flash output ([Maximum], [Medium], or [Minimum]) for [2 flash output]. Available in [ s ], [ f ], and [ a ] modes.
Page 254 Flash Control Shutter synchronization Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts. Set to [2nd curtain] and use low shutter speeds for natural-looking shots of subject motion trails, such as car headlights. When using second-curtain synchronization, set the shutter speed to 1/80 sec.
Page 255: Playback Settings
Playback Settings This chapter covers topics related to playback—playing back captured still photos and movies—and introduces menu settings on the Playback Settings ([x]) tab. Normal display or selection on this camera may not be possible for images captured on other cameras, or images from this camera that have been edited or renamed on a computer.
Page 256: Tab Menus: Playback Settings
Tab Menus: Playback Settings Playback settings 1 = 274 = 277 = 278 = 279 = 286 = 290 Playback settings 2 = 293 = 296 = 298 = 299 = 302 = 304 Playback settings 3 = 305 = 308 = 310 = 312...
Page 257 Tab Menus: Playback Settings Playback settings 4 = 314 = 316 = 317...
Page 258: Image Playback
Image Playback Single-Image Display Play back the image. Press the <x> button. Select an image. To play back newer images, press the < Z > button, and to play back older images, press the < Y > button. Each time you press the button, the display will change.
Page 259 Image Playback Shooting Information Display With the shooting information screen displayed, you can press the button to change the information displayed. You can also customize the information displayed, in [x: Playback information display] ( = 314).
Page 260 Image Playback Touch Playback The camera features a touch-screen panel that you can touch to control playback. Supported touch operations are like those used with smartphones and similar devices. First, press the <x> button to prepare for touch playback. Image browsing Jump display Index display Magnified view...
Page 261: Magnified Image Display
Magnified Image Display You can magnify your captured images. Magnify the image. During image playback, turn the <6> dial clockwise. In magnified view, the position of the magnified area (1) is shown in the lower right of the screen. ( 1 ) Scroll the image.
Page 262: Index Display (Multiple-Image Display)
Index Display (Multiple-Image Display) Switch to the index display. During image playback, turn the <6> dial counterclockwise. The 4-image index display will appear. The selected image is highlighted with an orange frame. Turning the <6> dial further counterclockwise switches to 9, 36, and 100-image display.
Page 263: Movie Playback
Movie Playback Play back the image. Press the <x> button. Select a movie. Use the < Y > < Z > keys to select the movie to play back. In the single-image display, the [s1] icon displayed on the upper left indicates a movie.
Page 264 Movie Playback Movie Playback Panel Item Playback Operations 7 Play Pressing < 0 > toggles between playback and stop. Adjust the slow motion speed with the < Y > < Z > keys. The 8 Slow motion slow motion speed is indicated on the upper right of the screen.
Page 265 Movie Playback Movie Playback Panel (Video Snapshot Albums and Digest Movies) Item Playback Operations 7 Play Pressing < 0 > toggles between playback and stop. Adjust the slow motion speed with the < Y > < Z > keys. The 8 Slow motion slow motion speed is indicated on the upper right of the screen.
Page 266: Editing A Movie's First And Last Scenes
Editing a Movie’s First and Last Scenes You can edit out the first and last scenes of a movie in approx. 1-sec. increments. Pause movie playback. The movie playback panel will appear. On the movie playback panel, select [X]. Specify the part to be edited out. Select either [U] (Cut beginning) or [V] (Cut end).
Page 267 Editing a Movie’s First and Last Scenes Save the image. Select [W] (1). The save screen will appear. To save it as a new roll, select [New file]. To save it and overwrite the original movie file, select [Overwrite]. Select [ ] (2) to save a compressed version of the file.
Page 268: Frame Extraction
Frame Extraction From 4K movies or 4K time-lapse movies, you can select individual frames to save as approx. 8.3 megapixel (3840×2160) JPEG still images. This function is called “Frame Grab (4K frame capture)”. Play back the image. Press the < 3 > button. Select a 4K movie.
Page 269 Frame Extraction Save the image. Select [OK] to save the current frame as a JPEG still image. Select the image to display. Check the destination folder and image file number. Select [View original movie] or [View extracted still image]. Frame grabbing is not possible with Full HD movies, Full HD time-lapse movies, HD movies, or with 4K movies or 4K time-lapse movies from a different camera.
Page 270: Digest Movie Editing
Digest Movie Editing Individual chapters (clips) recorded in < D > mode can be erased. Be careful when erasing clips, because they cannot be recovered. Play back the image. Press the <x> button. Select a digest movie. Use the < Y > < Z > keys to select the digest movie.
Page 271 Digest Movie Editing Select [L]. Select [OK]. The clip is erased, and the digest movie is overwritten. Video snapshot albums can also be edited. Albums created with [x: Create album] cannot be edited. For other instructions on using the movie playback panel for digest movies, see “Movie Playback Panel (Video Snapshot Albums and Digest Movies)”...
Page 272: Playback On A Tv Set
Playback on a TV Set You can view your shots and movies on a TV by connecting the camera to a TV with an HDMI cable (not exceeding 2.5 m/8.2 ft., with a Type D terminal on the camera end). If the image does not appear on the TV screen, check if the [ 5 : Video system] is correctly set to [For NTSC] or [For PAL] (depending on the video system of your television).
Page 273 Playback on a TV Set Adjust movie sound volume with the TV set. The sound volume cannot be adjusted with the camera. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. Depending on the television, part of the image displayed may be cut off. Do not connect any other device’s output to the camera’s <k>...
Page 274: Protect Images
Protect Images You can protect important images from being accidentally erased. Protecting a Single Image Select [3: Protect images]. Select [Select images]. Select an image. Use the < Y > < Z > keys to select the image to protect. Protect the image.
Page 275 Protect Images Specifying the Range of Images to be Protected While looking at the images in the index display, you can specify the first and last images for a range to protect all the specified images at once. Select [Select range]. Select [Select range] in [ 3 : Protect images].
Page 276 Protect Images Protecting All Images in a Folder or on a Card You can protect all the images in a folder or on a card at once. When you select [All images in folder] or [All images on card] in [ 3 : Protect images], all the images in the folder or on the card will be protected.
Page 277: Rotate Still Photos
Rotate Still Photos You can use this feature to rotate the displayed image to the desired orientation. Select [3: Rotate stills]. Select an image. Use the < Y > < Z > keys to select the image to rotate. Rotate the image. Each time you press <...
Page 278: Change Movie Orientation Information
Change Movie Orientation Information You can manually change movie orientation information (which determines which side is up). [x: Change mov rotate info] Select a movie. Use the < Y > < Z > keys to select a movie with orientation information to change.
Page 279: Erase Images
Erase Images You can either select and erase unnecessary images one by one or erase them in one batch. Protected images ( = 274) will not be erased. Once an image is erased, it cannot be recovered. Make sure you no longer need the image before erasing it.
Page 280 Erase Images Checkmarking [ X ] Images to Be Erased in a Batch By adding checkmarks to the images to be erased, you can erase all those images at once. Select [3: Erase images]. Select [Select and erase images]. Select an image. Use the <...
Page 281 Erase Images Specifying the Range of Images to Be Erased While looking at the images in the index display, you can specify the first and last images for a range to erase all the specified images at once. Select [Select range]. Select [Select range] in [ 3 : Erase images].
Page 282 Erase Images Erasing All Images in a Folder or on a Card You can erase all the images in a folder or on a card at once. When [ 3 : Erase images] is set to [All images in folder] or [All images on card], all the images in the folder or on the card will be erased.
Page 283: Prepare To Print
Prepare to Print All operations in direct printing are performed on the camera, as you view screens for camera operations. Connecting the Camera and Printer Prepare the printer. For details, refer to the printer’s instruction manual. Connect the camera to the printer with an interface cable (sold separately).
Page 284 Prepare to Print Turn the camera on. Some printers may beep. The image is displayed, along with a printer connection icon in the upper left of the screen. Confirm in advance that the printer has a PictBridge-compatible terminal. Movies cannot be printed. Printers only compatible with “CP Direct”...
Page 285: Print Images
Print Images The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. Select the image to be printed. Confirm that an icon is displayed in the upper left of the screen.
Page 286: Print Ordering
Print Ordering DPOF (Digital Print Order Format) enables you to print images recorded on the card according to your printing instructions such as the image selection, quantity to print, etc. You can print multiple images in one batch or create a print order for a photofinisher.
Page 287 Print Ordering Exit the setting. Press the <M> button. Next, select [Sel.Image] or [Multiple] to specify the images to be printed. If you print an image with a large image size using the [Index] or [Both] setting ( = 286), the index print may not be printed with certain printers. In this case, resize the image ( = 304), then print the index print.
Page 288 Print Ordering Specifying Images for Printing Selecting Images Select and specify the images one by one. Press the <M> button to save the print order to the card. Standard/Both Press < 0 > to print a copy of the displayed image. By pressing the < W > <...
Page 289 Print Ordering All Images in a Folder Select [Mark all in folder] and select the folder. A print order for one copy of all the images in the folder will be specified. If you select [Clear all in folder] and select the folder, the print order for all the images in the folder will be canceled.
Page 290: Photobook Set-Up
Photobook Set-up You can specify up to 998 images to be printed in a photobook. When you use EOS Utility (EOS software) to import images to a computer, the specified images for a photobook will be copied to a dedicated folder. This function is useful for ordering photobooks online.
Page 291 Photobook Set-up Specifying the Image Range for a Photobook While looking at the images in the index display, you can specify the range (start point to end point) of images to be specified for a photobook at once. Select [Multiple]. Under [ 3 : Photobook Set-up], select [Multiple].
Page 292 Photobook Set-up Specifying All Images in a Folder or on a Card You can specify all the images in a folder or on a card at once for a photobook. Under [x: Photobook Set-up], you can set [Multiple] to [All images in folder] or [All images on card] to specify all the images in the folder or on the card for a photobook.
Page 293: Creative Filters
Creative Filters You can apply the following filter processing to an image and save it as a separate image: Grainy B/W, Soft focus, Fish-eye effect, Art bold effect, Water painting effect, Toy camera effect, and Miniature effect. Select [3: Creative filters]. Select an image.
Page 294 Creative Filters Save the image. Select [OK]. Check the destination folder and image file number displayed, then select [OK]. To apply filter processing to other images, repeat steps 2–5. For images captured in RAW+JPEG shooting, filter processing is applied to the RAW image, and the results are saved as a JPEG.
Page 295 Creative Filters J Art bold effect Makes the photo look like an oil painting and the subject look more three- dimensional. By adjusting the effect, you can change the contrast and saturation. Note that subjects such as the sky or white walls may not be rendered with a smooth gradation and may look irregular or have significant noise.
Page 296: Creative Assist
Creative Assist You can process RAW images by applying your preferred effects and saving as JPEGs. Select [3: Creative Assist]. Select an image. Use the < Y > < Z > keys to select images to process, then press < 0 >. Select an effect level.
Page 297 Creative Assist You can adjust effects such as [Brightness] or [Contrast] by pressing < 0 > and then using the < Y > < Z > keys. Press < 0 > when adjustment is finished. To reset the effect, tap [Reset]. To confirm the effect, tap [Save] in the upper right of the screen.
Page 298: Red-Eye Correction
Red-Eye Correction Automatically corrects portions of images affected by red-eye from flash. Select [3: Red-eye correction]. Select an image with <Y> <Z>. After image selection, either tap [E] or press < 0 >. White frames are displayed around corrected image areas. Save the image.
Page 299: Create Album
Create Album You can rearrange, delete, or play back the video snapshots in an album. Select [3: Create album]. Select an album to edit. Press < 0 > to add a checkmark [ X ]. After selection, press the <M> button.
Page 300 Create Album Option Description Use the < Y > < Z > keys to select a video snapshot to move, T Rearrange video then press < 0 >. Use the < Y > < Z > keys to move it, then snapshots press <...
Page 301 Create Album Selection of Background Music Albums and slideshows can be played with background music once you copy the music to the card, using EOS Utility (EOS software). Select [Background music]. Set [Background music] to [On]. Select the background music. Use the <...
Page 302: Cropping
Cropping You can crop a captured JPEG image and save it as another image. Cropping an image is possible only with JPEG images. Images shot in RAW cannot be cropped. Select [x: Cropping]. Select an image. Use the < Y > < Z > keys to select the image to crop.
Page 303 Cropping Correcting the Tilt You can correct image tilt by ±10°. Turn the <6> dial to select [ c ], then press < 0 >. While checking the tilt against the grid, turn the <6> dial (in 0.1° increments) or tap the left or right wedge (in 0.5° increments) on the upper left of the screen to correct the tilt.
Page 304: Resizing
Resizing You can resize a JPEG image to make the pixel count lower and save it as a new image. Resizing an image is possible only with JPEG 3 , 4 , and a images. JPEG b and RAW images cannot be resized. Select [3: Resize].
Page 305: Rating
Rating You can rate images on a scale of 1–5 (l/m/n/o/p). This function is called rating. * Rating images can help you organize them. Rating a Single Image Select [3: Rating]. Select [Select images]. Select the image to be rated. Use the <...
Page 306 Rating Rating by Specifying the Range While looking at the images in the index display, you can specify the first and last images for a range to rate all the specified images at once. Select [Select range]. Select [Select range] in [ 3 : Rating]. Specify the range of images.
Page 307 Rating Rating All Images in a Folder or on a Card You can rate all the images in a folder or on a card at once. Under [ 3 : Rating], when you select [All images in folder] or [All images on card], all the images in the folder or on the card will be rated.
Page 308: Slide Shows
Slide Shows You can play back the images on the card as an automatic slide show. Specify the images to be played back. To play back all the images on the card, go to step 2. If you want to specify the images to be played back in the slide show, filter the images with [ 3 : Set image search conditions] ( = 310).
Page 309 Slide Shows Display time Repeat Transition effect Background music Start the slide show. Select [Start]. After [Loading image...] is displayed, the slide show will start. Exit the slide show. To exit the slide show and return to the setting screen, press the <M> button.
Page 310: Set Image Search Conditions
Set Image Search Conditions You can filter image display according to your search conditions. After setting the image search conditions, you can play back and display only the found images. You can also protect, rate, play a slide show, erase, and apply other operations to filtered images.
Page 311 Set Image Search Conditions Apply the search conditions. Press the <M> button and read the message displayed. Select [OK]. The search condition is specified. Display the found images. Press the < 3 > button. Only the images that match the set conditions (filtered) will be played back.
Page 312: Image Jump By Swiping
Image Jump by Swiping In single-image display, you can swipe left or right with two fingers to jump forward or back through images according to the jump method set. Select [x: Image jump with i]. Select the jump method. With [Jump images by the specified number], you can turn the <6> dial to select the number of images to jump by.
Page 313 Image Jump by Swiping Browse by jumping. Press the <x> button. In single-image display, swipe left or right with two fingers. You can browse by the set method. (1) Jump method (2) Playback position To search images by shooting date, select [g: Date]. To search images by folder, select [h: Folder].
Page 314: Playback Information Display
Playback Information Display You can specify screens and accompanying information displayed during image playback. Select [3: Playback information display]. Add a checkmark [X] next to the number of screens to display. Use the < W > < X > keys to select a number.
Page 315 Playback Information Display [Brightness] display This histogram is a graph showing the Sample Histograms distribution of the image’s brightness level. The horizontal axis indicates the brightness level (darker on the left and brighter on the right) while the vertical axis indicates how many pixels Dark image exist for each brightness level.
Page 316: Af Point Display
AF Point Display You can display the AF points that were used to focus, which will be outlined in red on the playback screen. If automatic AF point selection is set, multiple AF points may be displayed. Select [3: AF point disp.]. Select [Enable].
Page 317: View From Last Seen
View from Last Seen You can specify which image is displayed first when you start image playback. Select [3: View from last seen]. Select an item. [Enable]: Playback resumes from the last image displayed (except when you have just finished shooting). [Disable]: Playback resumes from your most recent shot whenever the camera is restarted.
Page 319: Wireless Settings
Important Note that Canon cannot be held liable for any loss or damage from erroneous wireless communication settings when using the camera. In addition, Canon cannot be held liable for any other loss or damage caused by use of the camera.
Page 320: Tab Menus: Wireless Settings
Tab Menus: Wireless Settings Wireless settings 1 = 321 = 403 = 395 = 396 = 397 = 398 Wireless settings 2 = 404 Wireless communication is not available while the camera is connected via an interface cable to a computer or other device. Other devices, such as computers, cannot be used with the camera by connecting them with an interface cable while the camera is connected to devices via Wi-Fi.
Page 321: Selection Of Wi-Fi/Bluetooth Connection
Selection of Wi-Fi/Bluetooth Connection Select [k: Wi-Fi/Bluetooth connection]. Select an item for the camera to connect to. q Connect to smartphone ( = 323) Control the camera remotely and browse images on the camera over a Wi- Fi connection by using the dedicated Camera Connect app on smartphones or tablets (collectively referred to as “smartphones”...
Page 322 Selection of Wi-Fi/Bluetooth Connection R Upload to Web service ( = 369) Share images with friends or family on social media or the CANON iMAGE GATEWAY online photo service for Canon customers after you complete member registration (free of charge).
Page 323: Connecting To A Smartphone
Connecting to a Smartphone You can do the following after pairing the camera with a smartphone compatible with Bluetooth low energy technology (hereafter, “Bluetooth”). Establish a Wi-Fi connection using only the smartphone ( = 325). Establish a Wi-Fi connection with the camera even when it is off ( = 330).
Page 324 Connecting to a Smartphone Installing Camera Connect on a Smartphone The dedicated app Camera Connect (free of charge) must be installed on the smartphone on which Android or iOS is installed. Use the latest version of the smartphone OS. Camera Connect can be installed from Google Play or App Store. Google Play or App Store can also be accessed using the QR codes that appear when the camera is paired or connected via Wi-Fi to a smartphone.
Page 325 Connecting to a Smartphone Connecting to a Bluetooth-compatible Smartphone via Wi-Fi Steps on the Camera (1) Select [k: Wi-Fi/Bluetooth connection]. Select [qConnect to smartphone]. Select [Add a device to connect to]. Select an item. If Camera Connect is already installed, select [Do not display].
Page 326 Connecting to a Smartphone Select [Pair via Bluetooth]. Pairing now begins. To pair with a different smartphone after pairing with one initially, select [OK] on the screen at left. Steps on the Smartphone (1) Start Camera Connect. Tap the camera for pairing. If you are using an Android smartphone, go to step 9.
Page 327 Connecting to a Smartphone Steps on the Camera (2) Select [OK]. Press <0>. Pairing is now complete, and the camera is connected to the smartphone via Bluetooth. A Bluetooth icon appears on the main Camera Connect screen. The camera cannot be connected to two or more smartphones at the same time via Bluetooth.
Page 328 Connecting to a Smartphone Steps on the Smartphone (2) Tap on a Camera Connect function. In iOS, tap [Join] when a message is displayed to confirm camera connection. For the Camera Connect functions, see = 329. When a Wi-Fi connection is established, the screen for the selected function will appear.
Page 329 Connecting to a Smartphone [qWi-Fi on] Screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error. Camera Connect Functions Images on camera Images can be browsed, deleted, or rated.
Page 330 Connecting to a Smartphone Maintaining a Wi-Fi Connection When the Camera Is Off Even when the camera is off, as long as it is paired to a smartphone via Bluetooth, you can use the smartphone to connect via Wi-Fi. Even if the camera is off, tapping [Images on camera] in the Camera Connect menu starts a Wi-Fi connection.
Page 331 Connecting to a Smartphone Canceling the Pairing Cancel pairing with a smartphone as follows. Select [k: Wi-Fi/Bluetooth connection]. Select [qConnect to smartphone]. If the history ( = 392) is displayed, switch the screen with the < Y > < Z > keys.
Page 332 Connecting to a Smartphone Select [Delete connection information]. Select [OK]. Clear the camera information on the smartphone. In the smartphone’s Bluetooth setting menu, clear the camera information registered on the smartphone.
Page 333 Connecting to a Smartphone Wi-Fi Connection Without Using Bluetooth Steps on the Camera (1) Select [k: Wi-Fi/Bluetooth connection]. Select [qConnect to smartphone]. If the history ( = 392) is displayed, switch the screen with the < Y > < Z > keys.
Page 334 Connecting to a Smartphone Select [Connect via Wi-Fi]. Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required ( = 395). By selecting [Switch network] in step 6, you can establish a Wi-Fi connection via an access point ( = 384).
Page 335 Connecting to a Smartphone Steps on the Smartphone Operate the smartphone to Smartphone’s screen establish a Wi-Fi connection. (sample) Activate the smartphone’s Wi-Fi function, then tap the SSID (network name) checked in step 6. For the password, enter the password checked in step 6.
Page 336 Connecting to a Smartphone The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete. Operate the camera using Camera Connect ( = 329). For how to terminate the Wi-Fi connection, see “Terminating Wi-Fi Connections”...
Page 337 Connecting to a Smartphone Automatic Image Transfer as You Shoot Your shots can be automatically sent to a smartphone. Before following these steps, make sure the camera and smartphone are connected via Wi- Select [k: Wi-Fi settings]. Select [Send to smartphone after shot].
Page 338 Connecting to a Smartphone Sending Images to a Smartphone from the Camera You can use the camera to send images to a smartphone paired via Bluetooth (Android devices only) or connected via Wi-Fi. Play back the image. Press the <Q> button. Select [qSend images to smartphone].
Page 339 Connecting to a Smartphone (1) Sending Images Individually Select an image to send. Use the < Y > < Z > keys to select images to send, then press < 0 >. You can turn the <6> dial counterclockwise to select images from index display.
Page 340 Connecting to a Smartphone Select images to send. Use the < Y > < Z > keys to select images to send, then press < 0 >. You can turn the <6> dial counterclockwise to select images from index display. After selecting the images to send, press the <M>...
Page 341 Connecting to a Smartphone (3) Sending a Specified Range of Images Press <0>. Select [Send range]. Specify the range of images. Select the first image (start point). Select the last image (end point). To cancel the selection, repeat this step. You can turn the <6>...
Page 342 Connecting to a Smartphone Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 343 Connecting to a Smartphone (4) Sending All Images on the Card Press <0>. Select [Send all card]. Select [Size to send]. On the displayed screen, select an image size. When sending movies, select the image quality in [Quality to send]. Select [Send].
Page 344 Connecting to a Smartphone (5) Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Set Image Search Conditions” ( = 310).
Page 345 Connecting to a Smartphone Ending Image Transfer Sending Images from the Camera When Paired via Bluetooth (Android) Press the <M> button on the image transfer screen. Select [OK] on the screen on the left to end image transfer and the Wi-Fi connection.
Page 346 Connecting to a Smartphone During the image transfer operation, a picture cannot be taken even if the camera’s shutter button is pressed. You can cancel the image transfer by selecting [Cancel] during the transfer. You can select up to 999 files at a time. With a Wi-Fi connection established, disabling the smartphone’s power saving function is recommended.
Page 347 Connecting to a Smartphone Settings to Make Images Viewable from Smartphones Images can be specified after the Wi-Fi connection is terminated. Select [k: Wi-Fi/Bluetooth connection]. Select [qConnect to smartphone]. If the history ( = 392) is displayed, switch the screen with the < Y > < Z > keys.
Page 348 Connecting to a Smartphone Select [Viewable imgs]. Select an item. Select [OK] to access the setting screen. [All images] All images stored on the card become viewable. [Images from past days] Specify viewable images on the shooting- date basis. Images shot up to nine days ago can be specified.
Page 349 Connecting to a Smartphone [Select by rating] Specify viewable images depending on whether a rating is appended (or not appended) or by the type of rating. Once you select the type of rating, the viewable images are set. [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images.
Page 350 Connecting to a Smartphone If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. y Shooting mode switch set to <k>: movie recording continues. With a Wi-Fi connection to a smartphone established, certain functions are unavailable.
Page 351: Connecting To A Computer Via Wi-Fi
Connecting to a Computer via Wi-Fi This section describes how to connect the camera to a computer via Wi- Fi and perform camera operations using EOS software or other dedicated software. Install the latest version of software on the computer before setting up a Wi-Fi connection.
Page 352 Connecting to a Computer via Wi-Fi Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required. For details, see = 395.
Page 353 Connecting to a Computer via Wi-Fi Steps on the Camera (2) Select [OK]. The following message is displayed. “******” represents the last six digits of the MAC address of the camera to be connected. Steps on the Computer (2) Start EOS Utility. In EOS Utility, click [Pairing over Wi-Fi/LAN].
Page 354 Connecting to a Computer via Wi-Fi Steps on the Camera (3) Establish a Wi-Fi connection. Select [OK]. [ D Wi-Fi on] Screen Disconnect,exit Terminates the Wi-Fi connection. Confirm set. You can check the settings. Error details When a Wi-Fi connection error occurs, you can check the details of the error.
Page 355 Connecting to a Computer via Wi-Fi If the Wi-Fi connection is terminated while recording a movie with remote shooting, the following will occur. y Shooting mode switch set to <k>: movie recording continues. y Shooting mode switch not set to <k>: movie recording stops. Shooting operations using the camera are not possible after you use EOS Utility to switch from still photo mode to movie mode.
Page 356 Connecting to a Computer via Wi-Fi Sending Images on the Camera Automatically With the dedicated software Image Transfer Utility 2, you can send images on the camera to a computer automatically. Steps on the Computer (1) Connect the computer and access point and start Image Transfer Utility 2.
Page 357 Connecting to a Computer via Wi-Fi Select [OK]. Connect to an access point via Wi-Fi. Establish a Wi-Fi connection between the camera and the access point connected to the computer. For connection instructions, see “Wi- Fi Connection via Access Points” ( = 384).
Page 358 Connecting to a Computer via Wi-Fi Steps on the Camera (2) Select [Auto send images to computer]. Select [k: Wi-Fi settings]. Select [Auto send images to computer]. Select [Image sending options]. Select what to send. If you select [Selected imgs] in [Range to send], specify the images to send on the [Select images to send] screen.
Page 359: Connecting To A Printer Via Wi-Fi
Connecting to a Printer via Wi-Fi This section describes how to print images by directly connecting the camera to a printer supporting PictBridge (Wireless LAN) via Wi-Fi. For printer operating instructions, refer to the printer user manual. Select [k: Wi-Fi/Bluetooth connection].
Page 360 Connecting to a Printer via Wi-Fi Check the SSID (network name) and password. Check the SSID (1) and password (2) displayed on the camera screen. In [Wi-Fi settings], if you set [Password] to [None], the password will not be displayed or required ( = 395). Set up the printer.
Page 361 Connecting to a Printer via Wi-Fi Image Printing Printing Images Individually Select the image to be printed. Use the < Y > < Z > keys to select images to print, then press < 0 >. You can turn the <6> dial counterclockwise to select images from index display.
Page 362 Connecting to a Printer via Wi-Fi Printing According to Specified Image Options Press <0>. Select [Print order]. Set the printing options. For the print setting procedures, see “Print Ordering” ( = 286). If the print order is complete before establishing a Wi-Fi connection, go to step 4.
Page 363 Connecting to a Printer via Wi-Fi Print the image. When [OK] is selected, printing starts. Shooting is not possible while connected to a printer via Wi-Fi. Movies cannot be printed. Before printing, be sure to set the paper size. Certain printers may not be able to imprint the file number. If [Bordered] is set, certain printers may imprint the date on the border.
Page 364 Connecting to a Printer via Wi-Fi Print Settings The screen display and setting options vary depending on the printer. Also, certain settings may not be available. For details, refer to the printer’s instruction manual. Print setting screen (1) Sets date or file number printing ( = 366). (2) Sets the printing effects ( = 366).
Page 365 Connecting to a Printer via Wi-Fi Paper Settings Select [Paper settings]. [ Q ] Setting the Paper Size Select the size of the paper in the printer. [ Y ] Setting the Paper Type Select the type of the paper in the printer.
Page 366 Connecting to a Printer via Wi-Fi [ I ] Setting the Date/File Number Imprinting Select [ I ]. Select what to print. [ E ] Setting the Printing Effects (Image Optimization) Select [ E ]. Select printing effects. If you imprint shooting information on an image shot at an expanded ISO speed (H), the correct ISO speed may not be imprinted.
Page 367 Connecting to a Printer via Wi-Fi Cropping the Image Set cropping immediately before printing. Changing other print settings after you crop images may require you to crop the images again. On the print setting screen, select [Cropping]. Set the cropping frame size, position, and aspect ratio. The image area within the cropping frame will be printed.
Page 368 Connecting to a Printer via Wi-Fi Depending on the printer, the cropped image area may not be printed as you specified. The smaller the cropping frame, the lower the resolution at which images are printed. Handling Printer Errors If printing does not resume after you resolve a printer error (no ink, no paper, etc.) and select [Continue], operate the buttons on the printer.
Page 369: Sending Images To A Web Service
For CANON iMAGE GATEWAY instructions and setting details, refer to the help information for CANON iMAGE GATEWAY. If you also intend to use Web services other than CANON iMAGE GATEWAY, you must have an account with the services you intend to use.
Page 370 Sending Images to a Web Service Registering CANON iMAGE GATEWAY Link the camera and CANON iMAGE GATEWAY by adding CANON iMAGE GATEWAY as a destination Web service on the camera. You will need to enter an email address used on your computer or smartphone.
Page 371 Sending Images to a Web Service Enter your email address. Enter your email address, then select [OK]. Enter a four-digit number. Enter a four-digit number of your choice, then select [OK]. Select [OK]. The [ R ] icon changes to [...
Page 372 Access the page in the notification message. Follow the instructions to complete the settings on the camera web link settings page. Steps on the Camera (2) Add CANON iMAGE GATEWAY as a destination. Select [ CANON iMAGE GATEWAY is now added.
Page 373 Registering Other Web Services Steps on the Computer or Smartphone Configure the Web service you want to use. Visit the CANON iMAGE GATEWAY website and access the camera web link settings page. Follow the on-screen instructions to complete settings for Web services you want to use.
Page 374 Sending Images to a Web Service Sending Images You can share images with your family and friends by sending images from the camera to a Web service registered on the camera or by sending Web links of the online albums. Connecting to Web Services via Wi-Fi Select [k: Wi-Fi/Bluetooth connection].
Page 375 Sending Images to a Web Service Sending Images Individually Select an image to send. Use the < Y > < Z > keys to select images to send, then press < 0 >. You can turn the <6> dial counterclockwise to select images from index display.
Page 376 Sending Images to a Web Service Sending Multiple Selected Images Press <0>. Select [Send selected]. Select images to send. Use the < Y > < Z > keys to select images to send, then press < 0 >. You can turn the <6> dial counterclockwise to switch to three- image display for image selection.
Page 377 Sending Images to a Web Service Select [Size to send]. When YouTube is selected as the destination, [Size to send] is not displayed. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection.
Page 378 Sending Images to a Web Service Sending a Specified Range of Images Specify the range of images to send all the images in the range at once. Press <0>. Select [Send range]. Specify the range of images. Select the first image (start point). Select the last image (end point).
Page 379 Sending Images to a Web Service Select [Size to send]. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree].
Page 380 Sending Images to a Web Service Sending All Images on the Card Press <0>. Select [Send all card]. Select [Size to send]. On the displayed screen, select an image size. Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree].
Page 381 Sending Images to a Web Service Sending Images that Match the Search Conditions Send all the images that match the search conditions set in [Set image search conditions] at once. For [Set image search conditions], refer to “Set Image Search Conditions” ( = 310).
Page 382 Sending Images to a Web Service Select [Send]. On the screen after images are sent, select [OK] to end the Wi-Fi connection. When the [Terms of use] screen is displayed, thoroughly read the message, then select [I Agree]. To scroll the screen, use the < W > < X > keys.
Page 383 With a Wi-Fi connection to a Web service established, a picture cannot be taken even if the camera’s shutter button is pressed. When sending an image to a Web service other than CANON iMAGE GATEWAY, a send error message may not be displayed even if the image has not been sent to the Web service successfully.
Page 384: Wi-Fi Connection Via Access Points
Wi-Fi Connection via Access Points This section describes how to join a Wi-Fi network via an access point compatible with WPS (PCB mode). First, check the position of the WPS button and how long to press it. It may take approx. one minute to establish a Wi-Fi connection. Select [k: Wi-Fi/Bluetooth connection].
Page 385 Wi-Fi Connection via Access Points Select [Switch network]. Displayed when [q], [ D ], or [ l ] is selected. Select [Connect with WPS]. For [Camera access point mode] displayed in step 5, see = 387. Select [WPS (PBC mode)]. Select [OK].
Page 386 Go to step 8 on = 335. [DRemote control (EOS Utility)] Go to step 7 or 8 on = 353. [lPrint from Wi-Fi printer] Go to step 6 on = 360. Registering CANON iMAGE GATEWAY Go to step 5 on = 371.
Page 387 Wi-Fi Connection via Access Points Send To Screen A screen to select a destination may be displayed depending on the Web service. To register destinations or to specify the settings, you must use a computer. For more information, refer to the EOS Utility Instruction Manual. The [Send to] screen may be displayed.
Page 388 Wi-Fi Connection via Access Points Select an item. Select an item to access the screen for numerical input. To use a gateway, select [Enable], then select [Address]. Enter the desired values. Turn the <6> dial to move the input position in the upper area and use the <...
Page 389: Connecting To A Wireless Remote Control
Connecting to a Wireless Remote Control This camera can also be connected to Wireless Remote Control BR-E1 (sold separately) via Bluetooth for remote control shooting ( = 193). Select [k: Wi-Fi/Bluetooth connection]. Select [KConnect to Wireless Remote]. Select [Add a device to connect to]. Pair the devices.
Page 390 Connecting to a Wireless Remote Control Set up the camera for remote Still Photo Shooting shooting. Set [Drive mode] on the [z] tab to [ Q ] ( = 137). Movie Recording In [Remote control] on the [z] tab, select [Enable]. For instructions after the pairing is complete, refer to the BR-E1’s Instruction Manual.
Page 391 Connecting to a Wireless Remote Control Canceling the Pairing Before pairing with a different BR-E1, clear the information about the connected remote control. Select [k: Wi-Fi/Bluetooth connection]. Select [KConnect to Wireless Remote]. Select [Delete connection information]. Select [OK].
Page 392: Reconnecting Via Wi-Fi
Reconnecting via Wi-Fi Follow these steps to reconnect to devices or Web services with registered connection settings. Select [k: Wi-Fi/Bluetooth connection]. Select an item. Select the item to connect to via Wi-Fi from the displayed history. If the item is not displayed, use the <...
Page 393 Reconnecting via Wi-Fi [D] Computer On the computer, start the EOS software. If the computer’s connection destination has been changed, restore the setting to connect via Wi-Fi to the camera or the same access point as the camera. When directly connecting the camera to a computer via Wi-Fi, “_ Canon0A”...
Page 394: Registering Multiple Connection Settings
Registering Multiple Connection Settings You can register up to 10 connection settings for the wireless communication functions. Select [k: Wi-Fi/Bluetooth connection]. Select an item. If the history ( = 392) is displayed, switch the screen with the < Y > < Z > keys.
Page 395: Wi-Fi Settings
Wi-Fi Settings Select [k: Wi-Fi settings]. Select an item. Wi-Fi When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable] or [Airplane mode] ( = 403). Password Set to [None] to allow a Wi-Fi connection to be established without a password (except when connecting to an access point via Wi-Fi).
Page 396: Bluetooth Settings
Bluetooth Settings Select [k: Bluetooth settings]. Select an item. Bluetooth If you will not use the Bluetooth function, select [Disable]. Check connection information You can check the name and communication status of the paired device. Bluetooth address You can check the camera’s Bluetooth address.
Page 397: Changing The Nickname
Changing the Nickname You can change the camera nickname (displayed on smartphones and other cameras) as needed. Select [k: Nickname]. Enter text using the virtual keyboard (=406). When you finish entering characters, press the <M> button.
Page 398: Geotagging Images With Gps Information From Other Devices
Geotagging Images with GPS Information from Other Devices You can geotag images with a Bluetooth enabled smartphone. Complete these settings after installing the dedicated Camera Connect app ( = 324) on the smartphone. On the smartphone, activate location services. Establish a Bluetooth connection. Connect the camera to a smartphone via Bluetooth ( = 325).
Page 399 Geotagging Images with GPS Information from Other Devices GPS Connection Display You can check the status of acquiring location information from a smartphone by referring to [GPS] display on screens for still photo shooting or movie recording ( = 503 and = 505, respectively). Gray: Location services are off Blinking: Location information cannot be acquired On: Location information acquired...
Page 400 Geotagging Images with GPS Information from Other Devices The smartphone can acquire location information only while it is paired with the camera via Bluetooth. Direction information is not acquired. Acquired location information may not be accurate, depending on traveling conditions or smartphone status. It may take some time to acquire location information from the smartphone after you turn the camera on.
Page 401: Changing Or Deleting Connection Settings
Changing or Deleting Connection Settings To change or delete the connection settings, terminate the Wi-Fi connection first. Select [k: Wi-Fi/Bluetooth connection]. Select an item. If the history ( = 392) is displayed, switch the screen with the < Y > < Z > keys.
Page 402 Delete connection information When deleting connection information for a paired smartphone, also delete the camera information registered on the smartphone ( = 331). For Web services, visit the CANON iMAGE GATEWAY website to delete the connection settings.
Page 403: Airplane Mode
Airplane Mode You can temporarily disable Wi-Fi and Bluetooth functions. Select [k: Airplane mode]. Set to [On]. [ ] is displayed.
Page 404: Clearing Wireless Communication Settings To Default
Clearing Wireless Communication Settings to Default All wireless communication settings can be deleted. By deleting the wireless communication settings, you can prevent their information from being exposed when you lend or give your camera to other people. Select [k: Clear wireless settings]. Select [OK].
Page 405: View Info Screen
View Info Screen You can check error details and the camera’s MAC address. Select [k: Wi-Fi/Bluetooth connection]. Tap [View info]. The [View info] screen will appear. When an error has occurred, press < 0 > to display the error content.
Page 406: Virtual Keyboard Operations
Virtual Keyboard Operations Input area, for entering text Switch input modes Cursor keys, for moving in the Space input area Delete a character in the input Current no. of characters/no. area available Finish the text entry Keyboard To move the cursor within (1), turn the <6> dial. To move within (2) and (4)–(7), use the <...
Page 407: Responding To Error Messages
Responding to Error Messages When an error occurs, display the details of the error by following one of the procedures below. Then, eliminate the cause of the error by referring to the examples shown in this chapter. On the [View info] screen, press < 0 > ( = 405). Select [Error details] on the [Wi-Fi on] screen.
Page 408 Responding to Error Messages 11: Connection target not found In the case of [q], is Camera Connect running? Establish a connection using Camera Connect ( = 335). In the case of [ D ], is the EOS software running? Start the EOS software and reestablish the connection ( = 353). In the case of [ l ], is the power of the printer on? Turn on the printer.
Page 409 Responding to Error Messages 21: No address assigned by DHCP server What to check on the camera On the camera, IP address is set to [Auto setting]. Is this the correct setting? If no DHCP server is used, specify the settings after setting the IP address to [Manual setting] on the camera ( = 387).
Page 410 Responding to Error Messages 22: No response from DNS server What to check on the camera On the camera, does the DNS server’s IP address setting match the server’s actual address? Set the IP address to [Manual setting]. Then, on the camera, set the IP address that matches the address of the DNS server used ( = 387, = 421).
Page 411 Responding to Error Messages 23: Device with same IP address exists on selected network What to check on the camera Do the camera and another device connected via Wi-Fi to the same network have the same IP address? Change the camera’s IP address to avoid using the same address as another device on the network.
Page 412 Responding to Error Messages 61: Selected SSID wireless LAN network not found Are any obstacles blocking the line of sight between the camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible from the point of view of the camera ( = 418).
Page 413 Responding to Error Messages 63: Wireless LAN authentication failed Are the camera and the access point set to use the same authentication method? The camera supports the following authentication methods: [Open system], [Shared key], and [WPA/WPA2-PSK]. Are the camera and the access point set to use the same password for authentication? The setting is case-sensitive, so check upper- and lower-case characters.
Page 414 Responding to Error Messages 65: Wireless LAN connection lost Are any obstacles blocking the line of sight between the camera and the antenna of the access point? Move the antenna of the access point to a position clearly visible from the point of view of the camera ( = 418). The Wi-Fi connection was lost for some reason, and the connection cannot be restored.
Page 415 Responding to Error Messages 68: Cannot connect to wireless LAN terminal. Retry from the beginning. Did you hold down the access point’s WPS (Wi-Fi Protected Setup) button for the specified period of time? Hold down the WPS button for the period of time specified in the access point’s instruction manual.
Page 416 Is the network connected? Check the connection status of the network. 126: Could not connect to server CANON iMAGE GATEWAY is under maintenance or load is concentrated temporarily. Try connecting to the Web service again later. 127: An error has occurred A problem other than error code number 121 to 126 occurred while the camera is connected to the Web service.
Page 417 Responding to Error Messages 151: Transmission canceled Automatic image transfer to the computer was somehow interrupted. Restart the camera to resume automatic image transfer. 152: Card’s write protect switch is set to lock Is the card’s write protect switch set to the locked position? Slide the card’s write protect switch to the writing position.
Page 418: Wireless Communication Function Notes
Wireless Communication Function Notes If the transmission rate drops, the connection is lost, or other problems occur when using the wireless communication functions, try the following corrective actions. Distance Between the Camera and the Smartphone If the camera is too far from the smartphone, a Wi-Fi connection may not be established even when Bluetooth connection is possible.
Page 419 Wireless Communication Function Notes Cautions for Using Multiple Cameras When connecting multiple cameras to one access point via Wi-Fi, make sure the cameras’ IP addresses are different. When multiple cameras are connected to one access point via Wi-Fi, the transmission rate drops. When there are multiple IEEE 802.11b/g/n (2.4 GHz band) access points, leave a gap of five channels between each Wi-Fi channel to reduce radio wave interference.
Page 420: Security
Security If security settings have not been properly set, the following problems may occur. Transmission monitoring Third parties with malicious intent may monitor the Wi-Fi transmissions and attempt to acquire the data you are sending. Unauthorized network access Third parties with malicious intent may gain unauthorized access to the network you are using to steal, modify, or destroy information.
Page 421: Checking Network Settings
Checking Network Settings Windows Open the Windows [Command Prompt], then type ipconfig/all and press the <Enter> key. In addition to the IP address assigned to the computer, the subnet mask, gateway, and DNS server information are also displayed. Mac OS In Mac OS X, open the [Terminal] application, enter ifconfig -a, and press the <Return>...
Page 422: Wireless Communication Status
Wireless Communication Status Wireless communication status can be checked on the screen. Information display screen Information display screen during shooting during playback ( 1 ) ( 3 ) ( 2 ) ( 1 ) ( 3 ) ( 2 ) Wi-Fi function Bluetooth function Wireless signal strength...
Page 423 Wireless Communication Status Screen Communication Status Wi-Fi Function Wireless Signal Strength Wi-Fi: Disable connected Wi-Fi: Enable Connecting (Blinking) Connected Sending data (Animated) Connection error (Blinking) Bluetooth Function Indicator Bluetooth Function Connection Status Screen Bluetooth connected [Enable] Bluetooth not connected [Disable] Bluetooth not connected Not displayed “Bluetooth not connected”...
Page 425: Function Settings
Function Settings This chapter describes menu settings on the function settings ([ 5 ]) tab. A M icon to the right of a page title indicates that the function is available only in advanced shooting modes ([ d ], [ s ], [ f ], or [ a ]) or [k] movie modes ([k] or [M]).
Page 426: Tab Menus: Function Settings
Tab Menus: Function Settings Function settings 1 = 428 = 430 = 433 = 434 = 435 Function settings 2 = 437 = 438 = 439 = 440 = 443 = 444 Function settings 3 = 445 = 446 = 447 = 448 = 449 = 450...
Page 427 Tab Menus: Function Settings Function settings 4 = 451 = 453 = 454 Function settings 5 = 460 = 455 = 456 = 458 = 458 = 458...
Page 428: Select Folder
Select Folder You can freely create and select the folder where the captured images are to be saved. Creating a Folder Select [5: Select folder]. Select [Create folder]. Select [OK].
Page 429 Select Folder Selecting a Folder Select a folder on the folder selection screen. Captured images are stored in your selected folder. (1) Number of images in folder (2) Lowest file number (3) Folder name (4) Highest file number Folders A folder can contain up to 9999 images (file number 0001–9999). When a folder becomes full, a new folder with the folder number increased by one is created automatically.
Page 430: File Numbering
File Numbering The captured images saved in a folder are IMG_0001.JPG assigned a file number from 0001 to 9999. (Example) You can change how the image files are numbered. File number Select [5: File numbering]. Set the item. Select [Numbering]. Select [Continuous] or [Auto reset].
Page 431 File Numbering Continuous When you wish to continue the file numbering sequence even after the card is replaced or a new folder is created. Even after you replace the card or create a new folder, the file numbering continues in sequence up to 9999. This is useful when you want to save images numbered anywhere between 0001 to 9999 on multiple cards or in multiple folders into one folder on a computer.
Page 432 File Numbering Auto Reset When you wish to restart the file numbering from 0001 each time the card is replaced or a new folder is created. When you replace the card or create a folder, the file numbering restarts from 0001 for the new images saved. This is useful if you want to organize images by cards or folders.
Page 433: Auto Rotate
Auto Rotate You can change the auto rotation setting that straightens images shot in vertical orientation when they are displayed. Select [5: Auto rotate]. Select an item. Onz D Automatically rotates images for display on both the camera and computers. On D Automatically rotates images only for display on computers.
Page 434: Adding Orientation Information To Movies
Adding Orientation Information to Movies For movies recorded with the camera held vertically, orientation information indicating which side is up can be added automatically to enable playback in the same orientation on smartphones or other devices. Select [5: Add k rotate info]. Select an item.
Page 435: Format Card
Format Card If the card is new or was previously formatted (initialized) by another camera or computer, format the card with this camera. When the card is formatted, all images and data on the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
Page 436 Format Card Format the Card in the Following Cases: The card is new. The card was formatted by a different camera or a computer. The card is full of images or data. A card-related error is displayed ( = 495). Low-Level Formatting Perform low-level formatting if the card’s writing or reading speed seems slow or if you want to totally erase the data on the card.
Page 437: Eco Mode
Eco Mode You can conserve battery power while the shooting screen is displayed. When the camera is not in use, the screen darkens to reduce battery consumption. Select [5: Eco mode]. Select [On]. If the camera is not used, the screen dims in approx.
Page 438: Power Saving
Power Saving You can adjust the timing of when the screen and camera turn off automatically ([Display off] and [Auto power off]). Select [5: Power saving]. Select an item. Even when [Auto power off] is set to [Disable], the screen will turn off after the time set in [Display off].
Page 439: Display Brightness
Display Brightness Screen brightness is adjustable. Select [5: Disp. brightness]. Make the adjustment. Referring to the gray chart, use the < Y > < Z > keys to adjust the brightness, then press < 0 >. To check the image’s exposure, referring to the histogram is recommended ( = 314).
Page 440: Date/Time/Zone
Date/Time/Zone When you turn on the power for the first time or if the date/time/zone have been reset, follow the steps below to set the time zone first. By setting the time zone first, you can simply adjust this setting as needed in the future and the date/time will be updated to match it.
Page 441 Date/Time/Zone Use the < Y > < Z > keys to select a [Time difference] item (+/–/hour/ minute), then press < 0 >. Use the < W > < X > keys to set it, then press < 0 >. After entering the time zone or time difference, use the <...
Page 442 Date/Time/Zone The date, time, and time zone settings may be reset when the camera is stored without the battery, when its battery becomes exhausted, or when it is exposed to below freezing temperatures for a prolonged period. If this happens, set them once again.
Page 443: Language
Language Select [5: LanguageK]. Set the desired language.
Page 444: Shutter Button Function For Movies
Shutter Button Function for Movies You can set the functions performed by pressing the shutter button halfway or completely during movie recording. Select [5: Shutter btn function for movies]. Select an item. Half-press Specify the function performed by pressing the shutter button halfway. Fully-press This item is displayed when the shooting mode switch is set to <k>.
Page 445: Video System
Video System Set the video system of any television used for display. This setting determines the frame rates available when you record movies. Select [5: Video system]. Select an item. For NTSC For areas where the TV system is NTSC (North America, Japan, South Korea, Mexico, etc.).
Page 446: Touch Control
Touch Control Select [5: Touch control]. Select an item. [Standard] is the normal setting. [Sensitive] provides a more reactive touch-screen panel response than [Standard]. Cautions for Touch Control Operations Do not use sharp objects such as fingernails or ballpoint pens for touch operations.
Page 447: Screen Autolock Settings
Screen Autolock Settings To make the camera less likely to detect unintended touch-screen operations, you can disable shooting screen touch operations after a specified period. Select [5: Screen autolock settings]. Set [Screen autolock] to [Enable]. Set [Time until locked]. Screen autolock is activated after your specified time elapses without any camera operations while the shooting screen is displayed.
Page 448: Beeping
Beeping You can disable beeping when subjects are in focus or for other operations. Select [5: Beep]. Select an item. Touch The beeper will be silent only for touch operations. Disable Disables beeping when subjects are in focus, when shooting with the self-timer, when using touch operations, and at other times.
Page 449: Hdmi Resolution
HDMI Resolution Set the image output resolution used when the camera is connected to a television or external recording device with an HDMI cable. Select [5: HDMI resolution]. Select an item. Auto The images will automatically be displayed at the optimum resolution matching the connected television.
Page 450: Hdmi Hdr Output
HDMI HDR Output You can view RAW images in HDR by connecting the camera to an HDR Select [5: HDMI HDR output]. Select [On]. Make sure the HDR TV is set up for HDR input. For details on how to switch inputs on the TV, refer to the TV manual.
Page 451: Shooting Information Display
Shooting Information Display You can customize the information shown when you are shooting. Select [5: Shooting info. disp.]. Grid Display Select [Grid display]. Select an item.
Page 452 Shooting Information Display Histogram Select [Histogram disp]. Select an item.
Page 453: Reverse Display
Reverse Display A mirror image can be displayed when you shoot with the screen rotated toward the subject (toward the front of the camera). Select [5: Reverse display]. Select [On]. Select [Off] if you prefer not to reverse display when the screen is rotated toward the front.
Page 454: Display Performance
Display Performance You can specify smooth display or power saving display in still photo shooting. Select [5: Disp. performance]. Select an item.
Page 455: Reset Camera
Reset Camera You can restore default camera settings in [ d ], [ s ], [ f ], [ a ], [k], and [M] shooting modes. Select [5: Reset camera]. Select [Basic settings]. To clear other settings, select [Other settings], then select an item. Select [OK].
Page 456: Copyright Information
Copyright Information When you set the copyright information, it will be recorded to the image as Exif information. Select [5: Copyright information]. Select an item. Enter text. Use the < V > cross keys to select a character, then press < 0 > to enter it. To switch input modes, select [ ] and press <...
Page 457 Copyright Information Checking the Copyright Information When you select [Display copyright info.] in step 2, you can check the [Author] and [Copyright] information that you entered. Deleting the Copyright Information When you select [Delete copyright information] in step 2, you can delete the [Author] and [Copyright] information.
Page 458: Manual/Software Url
Manual/Software URL To download instruction manuals, select [ 5 : Manual/software URL] and scan the displayed QR code with a smartphone. You can also use a computer to access the website at the URL displayed and download software. Certification Logo Display Select [ 5 : Certification Logo Display] to display some of the logos of the camera’s certifications.
Page 459: Custom Functions (C.fn)
Custom Functions (C.Fn) You can fine-tune camera functions and change the functionality of buttons and dials to suit your shooting preferences.
Page 460: Setting Custom Functions
Setting Custom Functions Select [Custom Functions(C.Fn)]. Select a Custom Function number ( 1 ) (1). Press the < Y > < Z > keys to select the Custom Function number, then press < 0 >. Change the setting as desired. Press the <...
Page 461: Custom Function Setting Items
Custom Function Setting Items Custom Functions are organized into two groups based on the function type: C.Fn I: Exposure, C.Fn II: Others. C.Fn I: Exposure C.Fn-1 ISO expansion 0: Off 1: On When you set the ISO speed, you can set “H” (equivalent to ISO 51200) for still photos and “H”...
Page 462 Custom Function Setting Items C.Fn II: Others C.Fn-3 Shutter/AE lock button 0: AF/AE lock 1: AE lock/AF This is convenient when you want to focus and meter separately. Press the <A> button to autofocus, and press the shutter button halfway to apply AE lock.
Page 463 Custom Function Setting Items C.Fn-5 Release shutter without lens You can specify whether shooting still photos or movies is possible without a lens attached to the camera. 0: Disable 1: Enable C.Fn-6 Retract lens on power off Lens retraction setting for gear-driven EF or EF-S STM lenses (such as EF 40mm f/2.8 STM) attached to the camera.
Page 465: My Menu
My Menu Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. The [ 9 : My Menu] tab is not displayed when [Menu display] on the [ j : Display level settings] tab is set to [Guided]. To set up My Menu, change [Menu display] to [Standard].
Page 466: Tab Menus: My Menu
Tab Menus: My Menu = 467 = 470 = 470 = 471...
Page 467: Registering My Menu
Registering My Menu Under My Menu tab, you can register menu items and Custom Functions whose settings you change frequently. Creating and Adding My Menu Tab Select [Add My Menu tab]. Select [OK]. You can create up to five My Menu tabs by repeating steps 1 and 2.
Page 468 Registering My Menu Select [Select items to register]. Register the desired items. Select the item to be set, then press < 0 >. Select [OK] on the confirmation dialog. You can register up to six items. To return to the screen in step 2, press the <M>...
Page 469 Registering My Menu Delete tab You can delete the current My Menu tab. Select [Delete tab] to delete the [MY MENU*] tab. Rename tab You can rename the My Menu tab from [MY MENU*]. Select [Rename tab]. Enter text. Select [ ] and press <...
Page 470 Registering My Menu Deleting all My Menu tabs/Deleting all items You can delete all the created My Menu tabs or My Menu items registered under them. Delete all My Menu tabs You can delete all My Menu tabs you created. When you select [Delete all My Menu tabs], all the tabs from [MY MENU1] to [MY MENU5] will be deleted and the [ 9 ] tab will revert to its default.
Page 471 Registering My Menu Menu Display Settings You can select [Menu display] to set the menu screen that is to appear first when you press the <M> button. Normal display Displays the last displayed menu screen. Display from My Menu tab Displays with the [ 9 ] tab selected.
Page 473: Reference
Reference...
Page 474: Software
Software You can download the latest version of EOS software or other dedicated software from the Canon website. Downloading and Installing the EOS Software or Other Dedicated Software Always install the latest version of the software. Update any previous versions that are installed by overwriting them with the latest version.
Page 475 Follow the on-screen instructions to install the software. Downloading the Software Instruction Manuals Software Instruction Manuals (PDF files) can be downloaded from the Canon website to your computer. Software Instruction Manual Download Site www.canon.com/icpd To view the Instruction Manuals (PDF files), an Adobe PDF viewing software such as Adobe Acrobat Reader DC (most recent version recommended) is required.
Page 476: Importing Images To A Computer
Importing Images to a Computer You can use EOS software to import images from the camera to a computer. There are two ways to do this. Connecting to a Computer via an Interface Cable (sold separately) Install the software (=474). Connect the camera to the computer with an interface cable (sold separately).
Page 477 Importing Images to a Computer Card Reader You can use a card reader to import images to a computer. Install the software (=474). Insert the card into the card reader. Use Digital Photo Professional to import the images. Refer to the Digital Photo Professional Instruction Manual.
Page 478: Household Power Outlet Accessory
Household Power Outlet Accessory You can power the camera with a household power outlet by using the DC Coupler DR-E12 and Compact Power Adapter CA-PS700 (each sold separately). Insert the coupler. Turn the camera off. Open the cover and insert the coupler with the terminals facing as shown.
Page 479: Troubleshooting Guide
Canon Service Center. Power-Related Problems Batteries cannot be charged with the charger. Do not use any battery packs other than a genuine Canon Battery Pack LP-E12. The battery charger’s lamp blinks. In case of battery charger problems, the orange charge lamp blinks and a protective circuit stops charging.
Page 480 Troubleshooting Guide The battery becomes exhausted quickly. Use a fully charged battery ( = 44). The battery performance may have degraded. If the battery performance is poor, replace the battery with a new one. The number of possible shots will decrease with any of the following operations: Pressing the shutter button halfway for a prolonged period.
Page 481 Troubleshooting Guide Shooting-Related Problems The lens cannot be attached. To attach EF/EF-S lenses, you will need a mount adapter. The camera cannot be used with RF lenses. No images can be shot or recorded. Make sure the card is properly inserted ( = 48). Slide the card’s write-protect switch to the Write/Erase setting ( = 48).
Page 482 Troubleshooting Guide The image is out of focus or blurred. Set [z: Focus mode] to [AF] ( = 184). When using a lens with a focus mode switch, set the switch to <AF> ( = 57). Press the shutter button gently to prevent camera shake ( = 59). In [z: IS settings], set [IS mode] to [On] ( = 190).
Page 483 The maximum burst displayed does not change when you switch cards, even if you switch to a high-speed card. The maximum burst shown in the table on = 497 is based on Canon’s testing card. (The faster the card’s writing speed, the higher the actual maximum burst will be.) For this reason, the maximum burst displayed may differ from the actual maximum burst.
Page 484 Troubleshooting Guide I cannot set the exposure compensation when both manual exposure and ISO Auto are set. See = 113 to set the exposure compensation. Not all the lens aberration correction options are displayed. Although [Chromatic aberr corr] and [Diffraction correction] are not displayed when [Digital Lens Optimizer] is set to [Enable], both functions are applied in shooting, as when set to [Enable].
Page 485 Troubleshooting Guide Remote control shooting is not possible. When taking still photos, set the drive mode to [ Q ] ( = 137). When recording movies, set [z: Remote control] to [Enable] ( = 237). Check the position of the remote control’s release timing switch. If you are using Wireless Remote Control BR-E1, see = 193, = 389.
Page 486 Troubleshooting Guide Movie recording stops by itself. If the card’s writing speed is slow, movie recording may stop automatically. For cards that can record movies, see = 499. To find out the card’s writing speed, refer to the card manufacturer’s website, etc. If you record a 4K movie for 9 min.
Page 487 Troubleshooting Guide The exposure changes during movie recording. If you change the shutter speed or aperture during movie recording, the changes in the exposure may be recorded. Recording a few test movies is recommended if you intend to perform zooming during movie recording. Zooming as you record movies may cause exposure changes or lens sounds to be recorded, an uneven audio level, or loss of focus.
Page 488 Troubleshooting Guide Problems with Wireless Features Cannot pair with a smartphone. Use a smartphone compliant with Bluetooth Specification Version 4.1 or later. Turn on Bluetooth from the smartphone settings screen. Pairing with the camera is not possible from the smartphone’s Bluetooth settings screen.
Page 489 Troubleshooting Guide Cannot reconnect to a smartphone. Even with a combination of the same camera and smartphone, if you have changed the settings or selected a different setting, reconnection may not be established even after selecting the same SSID. In this case, delete the camera connection settings from the Wi-Fi settings on the smartphone and set up a connection again.
Page 490 Troubleshooting Guide Display Problems The menu screen shows fewer tabs and items. Some tabs and items are not displayed in [ A ], [ D ], Special scene, and Creative filters modes. Tabs and items on the menu screen also vary for still photos and movies.
Page 491 Troubleshooting Guide The shooting date and time displayed are incorrect. Make sure the correct date and time are set ( = 440). Check the time zone and daylight saving time ( = 440). The date and time are not in the image. The shooting date and time do not appear in the image.
Page 492 Troubleshooting Guide Playback Problems A red box is displayed on the image. [ 3 : AF point disp.] is set to [Enable] ( = 316). During image playback, the AF points are not displayed. The AF points are not displayed when the following types of images are played back: Images captured in [ F ] or [ G ] Special scene modes.
Page 493 Troubleshooting Guide No picture appears on the television. Make sure [ 5 : Video system] is set to [For NTSC] or [For PAL] correctly for the video system of your television ( = 445). Make sure the HDMI cable’s plug is inserted all the way in ( = 272). There are multiple movie files for a single movie recording.
Page 494 Troubleshooting Guide Computer Connection Problems I cannot import images to a computer. Install EOS Utility (EOS software) in the computer ( = 474). If the camera is already connected via Wi-Fi, it cannot communicate with any computer connected with an interface cable. Communication between the connected camera and computer does not work.
Page 495: Error Codes
If there is a problem with the camera, an error message will appear. Follow the on- screen instructions. If the problem persists, write down the error code (Err xx) and contact a Canon Service Center. (1) Error number (2) Cause and countermeasures ( 2 )
Page 496: Performance Data
Performance Data Still Photo Shooting Number of Possible Shots Approx. 315 shots (at a room temperature of 23°C/73°F) • Based on using the screen and a fully charged Battery Pack LP-E12, and following CIPA (Camera & Imaging Products Association) testing standards. ISO Auto Range ISO Speed Shooting Mode...
Page 497 1250 • Number of possible shots and maximum burst as measured using a 32 GB UHS-I card conforming to Canon testing standards. • File size, number of possible shots, and maximum burst vary depending on shooting conditions (such as aspect ratio, subject, memory card brand, ISO speed, Picture Style, Custom Functions, and other settings).
Page 498 Performance Data Pixel Count at Specific Aspect Ratios (Approx. pixels) Image Quality 1 / F 6000×4000 (24.0 megapixels) 6000×4000 (24.0 megapixels) 6000×4000 (24.0 megapixels) 5328×4000 (21.3 megapixels)* 3984×2656 (10.6 megapixels) 3552×2664 (9.5 megapixels) 2976×1984 (5.9 megapixels) 2656×1992 (5.3 megapixels) 2400×1600 (3.8 megapixels) 2112×1600 (3.4 megapixels)* Image Quality 16:9...
Page 499 Performance Data Movie Recording Cards that Can Record Movies Movie Recording Size SD Card UHS-I, UHS Speed Class 3 or higher SD Speed Class 10 or higher SD Speed Class 4 or higher SD Speed Class 10 or higher SD Speed Class 4 or higher •...
Page 500 Performance Data Total Movie Recording Time and File Size Per Minute (Approx.) Total Possible Recording Time on Card Movie Recording Size File Size 8 GB 32 GB 128 GB 8 min. 35 min. 2 hr. 21 min. 860 MB/min. H 45 17 min.
Page 501 Performance Data ISO Speed in Movie Recording In [k]/[M] mode, when set to ISO Auto ISO speed is automatically set in a range of ISO 100–12800 for Full HD/ HD movies and ISO 100–6400 for 4K movies. The maximum value in the automatic setting range is expanded to H (equivalent to ISO 25600) in Full HD/HD movie recording when [ISO expansion] in [ 5 : Custom Functions(C.Fn)] is set to [1: On] ( = 461) and then [Max for Auto] in [z: kISO speed settings] is set to [H...
Page 502 Performance Data Image Playback Resize Options by Original Image Quality Available Resize Settings Original Image Quality Size for Resized Images (Approx. pixels) Image Quality 3984×2656 (10.6 megapixels) 3552×2664 (9.5 megapixels) 2976×1984 (5.9 megapixels) 2656×1992 (5.3 megapixels) 2400×1600 (3.8 megapixels) 2112×1600 (3.4 megapixels)* Image 16:9 Quality...
Page 503: Information Display
Information Display Still Photo Shooting Screen Each time you press the button, the information display will change. The display will show only the settings currently applied. (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (10) (11) (24) (12)
Page 504 Information Display (34) (35) (26) (36) (27) (37) (28) (38) (29) (39) (30) (40) (31) (41) (32) (42) (33) (26) Flash exposure compensation/ (35) Wi-Fi function Flash output level (36) Wi-Fi signal strength/Airplane (27) Camera shake warning mode (28) Self Portrait (37) Bluetooth function (29) Flash mode/FE lock (38) Magnify button...
Page 505 Information Display Movie Recording Screen Each time you press the button, the information display will change. The display will show only the settings currently applied. (11) (12) (13) (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (10) Movie orientation information...
Page 506 Information Display (30) (24) (31) (25) (32) (26) (33) (27) (28) (34) (29) (35) (24) Sound-recording level indicator (30) Wi-Fi signal strength/Airplane (manual) mode (25) Output without information display (31) Bluetooth function (26) AE lock (32) ISO speed (27) Shutter speed (33) Highlight tone priority (28) Aperture value (34) Wi-Fi function...
Page 507 Information Display Scene Icons In the [ A ] or [ D ] shooting mode, the camera detects the scene type and sets everything automatically to suit the scene. The detected scene type is indicated on the upper left of the screen. Portrait Non-Portrait Subject...
Page 508 Information Display Playback Screen Basic information display for still photos (10) (11) (12) (13) (14) (15) Wi-Fi function Already sent to a computer/ smartphone Wi-Fi signal strength/Airplane mode (10) Rating Battery level (11) Image protection Playback No./Total images/ (12) Folder number-File number Number of found images (13) Image quality/Edited image/ Shutter speed...
Page 509 Information Display Detailed information display for still photos (10) (11) (12) (13) (14) (15) (16) Aperture value (10) Histogram Shutter speed (11) ISO speed Shooting mode (12) Highlight tone priority White balance (13) Flash exposure compensation/ HDR shooting/Multi Shot Noise Auto Lighting Optimizer Reduction White balance correction...
Page 510 Information Display Detailed information display for movies (10) Quick Control Frame rate Movie playback Movie digital IS Recording mode/Time-lapse Recording time movie/Video snapshot Movie recording format Movie orientation information (10) Compression method Image size During movie playback, “*, *” will be displayed for [Fineness] and [Threshold] of [Picture Style]’s [Sharpness].
Page 511 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Canon Inc. is under license. Other trademarks and trade names are those of their respective owners. All other trademarks are the property of their respective owners.
Page 512 About MPEG-4 Licensing “This product is licensed under AT&T patents for the MPEG-4 standard and may be used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that was encoded only (1) for a personal and non-commercial purpose or (2) by a video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
Page 513 Canon accessories. Therefore, using this product with genuine accessories is highly recommended. Canon shall not be liable for any damage to this product and/or accidents such as malfunction, fire, etc. caused by the failure of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery). Please note that...
Page 514: Index
Index Numbers Auto reset : 432 Auto rotate : 433 1-point AF : 172, 177 Av (Aperture-priority AE) : 110 [4K] 3840×2160 (Movie) : 207 4K frame capture : 268 Roman Background music : 301 Basic information display : 508 Basic shooting modes : 73 Battery →...
Page 515 Index Continuous shooting : 135 Exposure compensation : 139 Contrast : 143, 160 Exposure compensation in M mode with Copyright information : 456 ISO Auto : 113 Creative Assist : 80, 296 Exposure level indicator : 504 Creative filters : 293 Exposure simulation : 148 Cropping (images) : 302 Custom Functions : 459...
Page 516 Index Frame rate : 209, 445 Histogram : 314 Full High-Definition (Full HD) (movie) : Image review time : 129 Importing (to computer) : 476 Index display : 262 Jump display (image browsing) : 312 GPS : 398 Magnifying images : 261 Manual reset : 432 Grainy B/W : 100, 294 Grid display : 451...
Page 517 Index Focus mode switch : 57 Attenuator : 216 Lock release : 55, 57 Autoexposure recording : 200 Optical aberration correction : 130 Auto slow shutter : 241 Peripheral illumination correction : 131 Cards that can record movies : 499 Lens electronic MF : 185 Compression method : 209 Location information : 398...
Page 518 Index Resizing : 304 Rotating (images) : 277, 433 PAL : 209, 445 Rotating (movies) : 278 Partial metering : 145 Part names : 36 Peripheral illumination correction : 131 Safety instructions : 30 Photobook set-up : 290 Safety shift : 461 Picture Style : 156, 159, 162 Saturation : 160 Playback : 255...
Page 519 Android : 324 Camera access point mode : 387 Temperature warning : 194, 242 Camera Connect : 324, 329 Tilt correction : 303 CANON iMAGE GATEWAY : 369 Time-lapse movie : 217 Clearing wireless communication Time zone : 440 settings : 404...
Page 520 Index Printing : 361 Print settings : 364 Reconnecting : 392 Remote operation : 329 Resize image : 337, 342, 377 Sending all images on the card : 343, Sending images that match search conditions : 344, 381 Send selected : 339, 376 SSID : 334, 352, 360 Switch network : 385 Viewable images : 347...
Page 522 The descriptions in this Instruction Manual are current as of October 2019. For information on the compatibility with any products introduced after this date, contact any Canon Service Center. For the latest version Instruction Manual, refer to the Canon Web site.

Canon EOS M200 Advanced User's Manual

Introduction

Preparation and Basic Operations

Basic Shooting Modes

Advanced Shooting Modes

Shooting Settings

Still Photo Shooting

Movie Recording

Flash Photography

Playback Settings

Wireless Settings

Function Settings

Custom Functions (C.fn)

My Menu

Reference

Quick Links

Related Manuals for Canon EOS M200

Summary of Contents for Canon EOS M200