The Command-Type Root Commands - Xcommand - TANDBERG Gatekeeper/Border Controller API D14172.01 User Manual

2.4 The Command-type root commands -
xcommand
To get an overview of the supported commands within a command-type root command, type ? or
help after the command-type root command.
<command-type root command> ?
Example 2.10
xcommand ?
- User Commands -
AdHocConference
AllowListAdd
AllowListDelete
Boot
CallTransfer
CheckBandwidth
CredentialAdd
CredentialDelete
DefaultLinksAdd
DefaultValuesSet
DenyListAdd
OK
To list usage for all commands with parameters, type a double question mark after the command-type
root command.
<command root command> ??
Example 2.11
xcommand dial ??
*h xCommand AdHocConference
Registration(r): <1..3750>
*h xCommand AllowListAdd
Pattern(r): <S: 1, 60>
*h xCommand AllowListDelete
AllowListId(r): <1..2500>
*h xCommand Boot
*h xCommand CallTransfer
Call(r): <1..900>
Leg(r): <1..2>
Alias(r): <S: 1, 60>
...
D14172.01
DenyListDelete
Dial
DisconnectCall
FeedbackDeregister
FeedbackRegister
FindRegistration
LinkAdd
LinkDelete
Locate
OptionKeyAdd
OptionKeyDelete
TANDBERG Gatekeeper/Border Controller API User Guide
PipeAdd
PipeDelete
RemoveRegistration
SubZoneAdd
SubZoneDelete
TransformAdd
TransformDelete
TraversalZoneAdd
TraversalZoneDelete
ZoneAdd
ZoneDelete
page 29 of 84