Fault / Warning Codes (S/N 000000- 012999) - Tennant T17 Operator's Manual

OPERATION
FAULT / WARNING CODES
(S/N 000000−012999)
Refer to the table below to determine the cause
and remedy for the fault.
Fault Code
(S/N 000000−012999)
(Displayed in LCD)
F1:Rcv Tank Full
F2: Sol Tank Empty
F3: Batt Very Low
F4: F/L Br Flt##
F5: R/R Br Flt##
F6: Vac 1 Short
F7: Vac 2 Short
F8: Check Brushes
F9: Propel Error
F10: Pickup Error
F11: Scrub Error
60
Cause(s)
Recovery tank is full
Solution tank is empty
Low battery charge
Front left brush not operating
Right rear brush not operating
Vacuum fan 1 not operating
Vacuum fan 2 not operating
Brushes not operating
All scrub functions inoperable
(1−Step does not function)
All scrub functions inoperable
(1−Step does not function)
All scrub functions inoperable
(1−Step does not function)
Remedy
Empty recovery tank
Fill solution tank
Recharge battery
Turn off and restart machine.
If fault code still appears, stop using machine
and contact Tennant service representative
Check Brushes.
Replace excessively worn brushes.
Turn off and restart machine.
If fault code still appears, stop using machine
and contact Tennant service representative
Turn off and restart machine.
If fault code still appears, stop using machine
and contact Tennant service representative
T17 9020160 (3−2019)