JVC KW-AVX708 Instructions Manual page 39

Menu items
Speaker Level
Selects the speaker
Adjusts the speaker level
Speaker Distance* 7
Selects the speaker
Adjusts the speaker distance
IF Band Width
* This subwoofer level setting takes effect only when surround is activated (
6
* 7 Not selectable when only the front speakers are activated.
EN33-42_KW-AVX700UF_f.indd 39 EN33-42_KW-AVX700UF_f.indd 39
All manuals and user guides at all-guides.com
Selectable settings, [reference page]
You can adjust the output level of the activated speakers (
see "Speaker Size" on page 38), monitoring the test tone.
• Front Left/Center/Front Right/Rear Right/
Sub Woofer* /Rear Left: adjust the output level of each
6
speaker in the range of –10dB to +10dB; Initial 00.
• Press and hold ENT to turn on and off the test tone—Test
Tone: ON, OFF.
You can adjust the speaker output timing.
• Front Left/Center/Front Right/Rear Right/Rear Left:
adjust the speaker distance from the listening position in
the range of 15 cm/6 inches to 600 cm/240 inches in 15-
cm/6-inch step. [Initial: 120 cm (for center speaker), 150
cm (for the other speakers)]
• Press and hold DISP to change the measuring unit—cm and
inch.
Auto: Increases the tuner selectivity to reduce interference
noises between adjacent stations. (Stereo effect may
be lost.)
Wide: Subject to the interference from adjacent stations,
but sound quality will not be degraded and the stereo
effect will remain.
39
☞
☞
also page 41).
SETTINGS
06.5.23 10:26:41 AM 06.5.23 10:26:41 AM