Error Codes And Corrective Actions - icetro ISI-271THS User Manual

Error Codes and Corrective Actions

Error code
Er36 Cup Out Sensor
Er37 Step Origin Er.
Er38 Step Reduce Er.
Er39 Step Motor Er.
Er40 Cup Empty Er.
Er41 Vend Comm. Er.
Er42 Cup Position Er.
Er43 Cup Empty Er.
Er44 Vend Comm.
Er45 Door Open Er.
Er46 Door Close Er.
Er47 Coin Mechanism
Er48 Bill Validator
Er49 Door Comm. Er.
Er50 Power IC Er.
Er51 Inverter DE error
Er52 Invertor Comm.
Er53 Invertor OC
Er54 Invertor OE
Er55 Invertor OH
Er56 Invertor TH
Er57 Invertor LU
Er58 Invertor COM
Er59 Invertor OL
Er60 Invertor OT
Er61 Control Comm.
When error occurs with regard to ice cream sale (e.g., ER35, 36, and 37),
For your
Turn off the power and then turn it on again.
information
Possible Cause
Cup discharge sensor Clean up the sensor detector part
input error (remove foreign matter)
Motor origin input error Remove the foreign matter
from the cup transfer line
Motor deceleration Turn power ON and OFF,
input error then restart the machine
Remove the foreign matter
Step motor error
from the cup transfer line
Cup exhausted Fill with the cups
Dispenser communication Turn power ON and OFF,
error then restart the machine
Turn power ON and OFF,
Cup discharge error
then restart the machine
Cup Exhaust switch
Fill with the cups
opened
vend pcb communication
PCB fault(contact A/S Center)
error
Door opening error Removing foreign material from doors
Door closing error Removing foreign material from doors
Coin unit error empty the coin
Bill unit error empty the bill
Door PCB communication
PCB failure (contact A/S Center)
error
Power IC error Sensor failure (contact A/S Center)
Inverter PCB failure PCB failure (contact A/S Center)
Inverter communication
Sensor failure (contact A/S Center)
error
Inverter over current Sensor failure (contact A/S Center)
Inverter over voltage Sensor failure (contact A/S Center)
Inverter over heat Sensor failure (contact A/S Center)
Erroneous detection of
Sensor failure (contact A/S Center)
temperature sensor
Turn power ON and OFF,
Inverter under voltage
then restart the machine
Communication failure
Sensor failure (contact A/S Center)
detected
Mean overvoltage
Sensor failure (contact A/S Center)
detected
Max. output protection Sensor failure (contact A/S Center)
Control pcb
PCB failure (contact A/S Center)
communication error
Corrective Action Release Action
Auto release Stop
After reset
Stop
release
After reset
Stop
release
After reset
Stop
release
Auto release Stop
Auto release Stop
After reset
Stop
release
Auto release Stop
Auto release Stop
After reset
Stop
release
After reset
Stop
release
After reset
Stop
release
After reset
Stop
release
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
Auto release Stop
80