Enter A Pause; View An Entry; Edit An Entry - Motorola IT.6XC Series Manual

4.5

Enter a pause

If your IT.6XC is connected to a switchboard, you may need to enter a pause in a stored
number. This gives the switchboard time to get an outside line. A pause is normally stored
after the switchboard access code (e.g. 9)
1. When storing a number, press and hold
continue storing the phone number.
4.6

View an entry

In standby:
1. Press Menu. Phonebook
2. Press OK. View is highlighted, press OK.
3. The first number in the phonebook is displayed. Scroll
Or
To search alphabetically, press the key with the first letter of the name, e.g. if the name
begins with N, press
The display shows the first entry beginning with N. If required, press
to the exact entry.
4. Press View to view the number.
During a call:
1. Press Pb to open the phonebook menu.
2. Enter the first letter of the name you want then scroll
e
name. Press View
3. Press Back to cancel the phonebook display.
4. Press again to end the call.
4.7

Edit an entry

1. Press Menu. Phonebook
2. Press OK, scroll
3. Press OK, the first number in the phonebook is displayed. Scroll
you want or search alphabetically and press OK.
e
4. Edit the name and press
5. Edit the number. Press
6. Press to return to standby.
20
is displayed.
6
twice.
to display the number.
is displayed.
d
to Edit.
OK to confirm. Press
Save to confirm. Press
#
until the display shows
u
or
u d
or
Clear to delete characters.
Clear to delete digits.
P. You can then
d
to the entry you want.
u d
or to scroll
if necessary to the exact
u d
or to the entry
Phonebook