Related Manuals for Teccpo TART04P
Summary of Contents for Teccpo TART04P
- Page 1 User Manual Advanced Rotary Tool Model: TART04P TECCPO is committed to providing the best After-sale Service, we strive for your FIVE STAR satisfaction! support@teccpo.net support@teccpotools.com...
-
Page 2: Safety Instructions
Safety instructions Warning: read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and / or serious injury. Save all warnings and instructions for future reference. Work area safety Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. - Page 3 better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
- Page 4 or serious injury. NOTE List only those operations that are applicable. NOTE List only those operations that were not included in the first warning. If all listed operations are applicable, then this warning is omitted, but all subsequent warnings are given without exclusion. Do not use accessories which are not specifically designed and recommended by the tool manufacturer.
- Page 5 metal parts of the power tool "live" and could give the operator an electric shock. Always hold the tool firmly in your hand(s) during the start-up. The reac- tion torque of the motor, as it accelerates to full speed, can cause the tool to twist.
- Page 6 dures or conditions and can be avoided by taking proper precautions as given below. Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. The operator can control kickback forces, if proper precautions are taken.
-
Page 7: Technical Specifications
Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully re-enter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. -
Page 8: Know Your Rotary Tool
Polishing and buffing Engraving Drilling Know Your Rotary Tool Before attempting to use any tool, familiarize yourself with all operating features and safety requirements.See Fig. 1. PART DESCRIPTION Shaft lock button Housing cap Collet Collet nut Collet wrench Brush cap On / Off switch Speed control dial Tool hanger... -
Page 9: Functions Description
Functions Description On / Off Switch This product has an easy access power switch (G) located at the bottom of the tool. To turn the tool ON, push the ON/OFF (I / O) switch (G) to the ON (I) position. To turn the tool OFF, push the ON/OFF (I / O) switch (G) to OFF (O) position. -
Page 10: Removing Accessories
Insert the shank of the accessory into the collet as deep as possible. With the shaft lock (A) engaged, tighten the collet nut (D) with the provided wrench (E) until the accessory shank is gripped by the collet. Avoid excess tightening of the collet nut (D). Removing Accessories Unplug the rotary tool. -
Page 11: Speed Control
over mandrel and push down to com- pletely cover drum end of mandrel. Insert the slot end of the provided wrench into the slot on top of the mandre and tighten the screw on the drum mandrel head to expand the drum and securely hold the sanding drum in place. - Page 12 - 11 -...
- Page 13 Rules of Operating Speeds The best way to determine the correct speed for work on any material is to practice for a few minutes on a piece of scrap, even after referring to the Speed Dial Settings tables. You can quickly learn that a slower or faster speed is more effective just by observing what happens when you make a pass or two at different speeds.
- Page 14 Removing the Detailer’s Grip Attachment Hold the handle B firmly and twist the tool until the nose piece D is loose. Remove nose piece D and handle B from housing collar C and reinstall original nose cap A (Fig. 2). FIG.1 FIG.2 Introduction...
-
Page 15: Cutting Guide
Cutting guide The cutting guide comes completely assembled and ready to use on a variety of materials up to 20mm thick. Always hold the tool firmly, using a slow steady pressure to guide the tool through your work. The speed of the tool will do the work. -
Page 16: Installation Instructions
Flexible Driver Attachment · Safety Rules for Flexible Driver Do not operate the flexible shaft with a sharp or multiple bends. Ensure that there are no sharp residual bends or kinks in the Flexible Driver before the operation. Over bending the shaft can generate excessive heat on the jacket or hand piece and may cause the Flexible Driver to disengage from the tool. - Page 17 When using Flexible Driver, it is recommended that the diameter of the accessories can't exceed 3.2mm Fig.1 Fig.2 Fig.3 Fig.4 Fig.5 Fig.6 - 16 -...
-
Page 18: Cleaning & Maintenance
Operating Instructions Run-In before Operation For optimum performance, allow your new Flexible Driver attachment to run at high speed on your rotary tool in a vertical position for 2 minutes before use (Fig. 7). Disengagement of the Flexible Driver The flexible shaft may become disengaged if the motor of your rotary tool is not elevated Higher than the working end of the Flexible Driver. - Page 19 Shenzhen Allsight E-business Co.,Ltd Web: www.teccpotools.com Facebook: www.facebook.com/Teccpo.US E-mail: support@teccpo.net ADD: Room104,Building P09, south China City Electronic trading Center,Longgang District, Shen Zhen,CHINA 4007628...
Need help?
Do you have a question about the TART04P and is the answer not in the manual?
Questions and answers