vollara Fresh air surround Quick Start

NOTE: Your FreshAir has been shipped with a Purification Plate installed.
CAUTION: Allow your FreshAir Surround to warm to room temperature before operating.
Damage may result from turning on a cold unit.
1. For optimal performance, place
your unit as high up as practical
(on a bookcase, high shelf, or other
stable surface).
3. Put the included AAA batteries
in the remote.
Battery
compartment
(2 AAA)
Fan UP
Power ON/OFF
Reminder Purifier UP
Reset
Fan
Purifier
DOWN DOWN
2. Insert the power supply plug into the power
receptacle on the rear of the unit. Plug the
appropriate cord into the power supply and
into a working electrical outlet.
For increased smoke and odor control, set the
unit to HIGH (see your owner's manual), then use
the PURIFIER UP and PURIFIER DOWN buttons
to adjust the purification level to its lowest
2
setting (250ft or 23m
of operation, gradually adjust up to the square
footage (or square meters) of the indoor area. The
purifier setting should not exceed the total area of
the indoor environment.
See your owner's manual before using the AWAY
MODE feature.
Away Mode
ON/SET/OFF
Normal/
High

QUICK START

2
). After the first 24 hours
Refer to your
owner's manual
for complete set
up and adjustment
procedures.
FAS_QS_65-00484_VA-00439-0313
65-00484