Page 1
F016 L69 946 Seite 1 Freitag, 19. März 2004 9:15 09 xx.xx kg 3000 1/min IPX4 xxxxxxxxxxxx TYP F016 xxx xxx 230V ~ 50/60Hz XXXXW Made in UK. Atco-Qualcast Stowmarket 20xx STOP...
Page 2
If the supply cord is damaged it must be re- the consumer care hotline on (01895) 838782 for assist- ance. We also have a network of Atco-Qualcast Ap- placed by a Atco-Qualcast Approved Service proved Service Agents who you can contact for serv- Agent.
F016 L69 946 Seite 3 Freitag, 19. März 2004 9:15 09 Assembly Starting and Stopping Insert the handle bottom 8 into the holes The blades continue to rotate for a few provided and seconds after the machine is switched off. Allow the motor/blade to stop rotating be- Secure with the screws.
Page 4
F016 L69 946 Seite 4 Freitag, 19. März 2004 9:15 09 non GB models...
Page 5
F016 L69 946 Seite 5 Freitag, 19. März 2004 9:15 09...
To aid storage loosen the wing nuts 13 and fold care taken in manufacture and testing, repair the handles. should be carried out by a Atco-Qualcast Ap- Ensure cables are not trapped when folding/un- proved Service Agent. folding top handles, do not drop the handles.
Fault Finding The following table gives checks and actions that you can perform if your machine does not operate correctly. If these do not identify/remedy the problem contact a Atco-Qualcast Approved Service Agent. Warning: Switch off, remove plug from mains before investigating fault.
Any damage caused to the product through the fitting of parts not made by Atco- Atco-Qualcast guarantees this product against Qualcast is not covered by the guarantee. manufacturing defects. We will repair (or re- Your statutory rights are not affected by this place at our option) if a manufacturing defect guarantee.
Need help?
Do you have a question about the Easi-Trak 32 and is the answer not in the manual?
Questions and answers