HOW TO:
SET AN END COOKING TIME
•
After selecting the cooking function and temperature proceed as previous section in 'How to set duration cooking'.
•
Once the desired cooking duration has been set press
cooking time will appear.
•
Press the
or
button to increase or decrease the time, each line represents 1 minute.
•
The current time and the A and
•
At the end of the cooking time the buzzer will sound and the oven will automatically switch off.
SECONDARY MENU:
Selected models have a secondary menu that allows you to modify some of the ovens settings. These include
child lock, showroom mode, Eco logic and Eco light modes.
CHILD LOCK
will stop a child from accidently switching the oven on. The appliance will lock the controls
automatically after 1 minute. The oven will not heat up suffi ciently to cause injury.
When this mode is active this symbol will appear on the display panel
on the menu.
SHOWROOM MODE
is used for demonstrating the products in Showrooms. The elements are not heated,
but the display panel can be set for cooking. When this mode is activated this symbol will appear on the display
panel
. This will become Off Show or On Show on the menu.
THE ECO LOGIC MODE
uses less power, to reduce energy bills. This is useful if other appliances in the
cooking area require more power than is available. Cooking times will be lengthened. This
highlighted in the display panel when this mode is activated. This will become High power or Low Power on the
menu.
KEEP WARM MODE
keeps the oven on for a period of time after the oven has fi nished cooking at a low
temperature. This will become Off hold or On hold on the menu.
THESE MODELS HAVE A SECONDARY MENU: SF109 / SFP109 / SFP125 / SFP390 / SF390 /
SC45MC / SC45M / SC45VC / MP122 / DOSP38X / S45MC / S45M / S45VC / MP322 / MP422
HOW TO ENTER THE SECONDARY MENU
•
When the oven is on standby turn the far left control knob, to activate the light.
•
Press and hold down the control for at least 5 seconds
•
Options for the secondary menu will appear and can be changed by moving the dial to the right.
•
Once the desired option is found, press in the dial to select this option. Turn the dial right or left
to turn the option on or off.
button and the sum of the current time and the
symbols will appear on the display panel.
SUPER START GUIDE
. This will become on bloc or off bloc
logo will be
www.smeguk.com
Need help?
Do you have a question about the SFP109 and is the answer not in the manual?
Questions and answers