Table of Contents
Advertisement
Warning and Safety instructions
This tumble dryer is supplied with a special lamp to cope with
particular conditions (e.g. relating to temperature, moisture, chemical
resistance, abrasion resistance and vibration). This special lamp
must only be used for the purpose for which it is intended. It is not
suitable for room lighting. Replacement lamps may only be fitted by
a Miele authorised person or by Miele Service.
Information on the heat pump and refrigerant
– This tumble dryer uses refrigerant gas which is not flammable and
not explosive.
– The humming noises caused by the heat pump during the drying
process are normal. They do not impair the efficient functioning of
the tumble dryer.
Damage to the tumble dryer by switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer, wait for at least one hour before
switching it on.
– This tumble dryer contains fluorinated greenhouse gases (F-Gas).
They are hermetically sealed.
Designation of refrigerant: R134a
Amount of refrigerant: 0.61 kg
Global warming potential of refrigerant: 1430 kg CO
Global warming potential of appliance: 872 kg CO
Correct use
The maximum load for this tumble dryer is 8 kg (dry weight).The
maximum recommended loads for individual programmes are given
in the Programme chart.
Do not lean on the door. Otherwise, the tumble dryer may tip over,
causing injury to yourself or others.
Always close the door after use. This way you will avoid the
danger of:
12
e
2
e
2
Advertisement
Table of Contents
