Glunz-Uhren V11141107 Instructions

Radio controlled alarm clock

Advertisement

Quick Links

Radio Controlled Alarm Clock Instructions

Safety instructions

We do not assume liability for resulting damages to property or personal injury if the product has been
abused in any way or damaged by improper use or failure to observe these operating
instructions. The guarantee will then expire!An exclamation mark in a triangle indicates
important information in the operating instructions. Carefully read the whole operating instructions
before operating the device.
Unauthorised conversion and/or modification of the device are inadmissible because of safety and
approval reasons (CE).
The appliance must not be subjected to heavy mechanical stress.
Do not leave packaging materials around unattended; they can become a dangerous toy for children.
The unit may only be used in dry inside areas.
Servicing, adjustment or repair works must only be carried out by a specialist/ specialist workshop.
If any questions arise that are not answered in this operating instruction, contact our Technical Advisory
Service or other experts.
Indoor temperature
Date
UP

Features:

-
DCF-77 version Radio-controlled clock
-
Indoor temperature display (
-
Time in 12/24 hours format display
-
Calendar display
-
2 daily alarms with snooze.

Starting the clock

Open the battery compartment & i
correct polarity.
The LCD displays time as "0:00 " and the clock starts to scan for Radio-controlled signal . (In optimal
condition, the correct time will be displayed within 3 to 5 minutes.)
The tower icon will keep flashing while the clock is searching for the signal.
When the wave icon remains constant on the display, it indicates successful reception of the Radio-
control time signal.
If the clock fails to receive the signal The tower symbol disappears from the LCD display.
In such case try moving the clock to another location say new the window away from any likely
interfering sources live television, computer, microwave oven etc & gently press the "Reset" button
with a pin (located at back of the clock).
SET
ALARM
℃/ ℉
)
nsert 1 x 1,5V, type "AAA" alkaline batteries. Pay attention to
SNOOZE / LIGHT
Radio reception
Seconds
Hours / Minutes
Day of week
DOWN
WAVE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V11141107 and is the answer not in the manual?

Questions and answers

Summary of Contents for Glunz-Uhren V11141107

  • Page 1 Radio Controlled Alarm Clock Instructions Safety instructions We do not assume liability for resulting damages to property or personal injury if the product has been abused in any way or damaged by improper use or failure to observe these operating instructions.
  • Page 2 Automatic Radio-control time update The clock will automatically scan for radio controlled signals daily at 1:00 am. If the time update fails, the clock will repeat the procedure on the next full hour (2:00 am, 3:00 am, 4:00 am, 5:00 am, 6:00 am, 7:00 am). If the unit still cannot receive the Radio-control time signal, it will search again at 1:00 am on the following day.
  • Page 3 Declaration of conformity, CE: We, Glunz-Uhren GmbH, Herdstr. 13, D – 78166 Donaueschingen, declare, that this product corresponds to the requirements of §3 FTEG (article 3 de R & TTE), subject to proper and adequate use.

Table of Contents

Save PDF