Diamond Antenna K400 Manual

The K400 can be installed on trunk lid, door or hatchback. Install the bracket on desired location as shown in the
following photos.
Trunk Lid
Hatchback or Door
Installing the K400
• Installing on trunk lid
The K400 bracket is basically installed as shown in
the following figure. To avoid damaging car body, use
protection plate.
• Installing on hatchback
Install the bracket on hatchback as shown in the above
figure with set screws and small hexagonal wrench.
To avoid damaging the car body, insert protection plate
into the place where set screws and the body contact.
bracket
car body
protection plate
set screw
hexagonal wrench (small)
Use set screws attached to install the bracket.