Connecting The Device Via Bluetooth - Medion MD 43438 User Manual

Insert USB flash drive
Proceed as follows:
− Press the P-MODE/M. button
− Press the P-MODE/M. until the display shows
If there is more than one folder on the storage medium, the display will also show
tents of the current folder will be played on repeat.
− Press the P-MODE/M. button again to change to random mode.
− Press the P-MODE/M. button repeatedly until the display shows RAND to start playback in shuffle mode.
− Press the P-MODE/M. button again to pause shuffle playback.

Connecting the device via Bluetooth

Bluetooth operation allows the wireless reception of audio signals from an external Bluetooth-capable audio out-
put device. Make sure that the distance between the two devices is no more than 10 metres.
NOTICE!
Only one Bluetooth device can be paired with the portable Bluetooth sound system at a time. It is not possible to
connect it to a smartphone and an audio output source at the same time.
Bluetooth-capable output device
To connect a Bluetooth-capable audio output device, proceed as follows:
− Switch the portable Bluetooth sound system on and select BT mode with the SOURCE/
The device is in search mode. During the search, the PAIR LED
display.
NOTICE!
The device is attempting to connect automatically to the last audio output device connected via Bluetooth. If this is
not possible, the Bluetooth speaker transmits its device identification via Bluetooth and the PAIR LED
flashes blue.
− Press the SOURCE/
− Switch on the Bluetooth function on your audio output device and activate the search mode in order to pair
the devices.
NOTICE!
If necessary, refer to the operating instructions for your audio output device for information about its Bluetooth
function and the operation of your audio output device.
The device name of the portable Bluetooth sound system (MD 43438) will be displayed as soon as the signal is
found.
− If it is necessary to provide a password, enter 0000.
The pairing of the two devices is complete when the LED display glows blue and an alert tone sounds.
The following functions can be controlled via the portable Bluetooth sound system on your output device:
/ AMS button
− Press the
− To pause playback, press the
− Press the /TUN.-
− Press the /TUN+
18
18
until the display shows
7 button if the device is not in Bluetooth mode.
8
briefly to start track playback.
/ /AMS button again.
17 button to return to the previous track.
9
button again to jump to the next track.
to play the current track on repeat.
to play all tracks on repeat.
®
14
rapidly flashes blue and bt appears on the
and the con-
7 button.
14
rapidly