Advertisement
8. Set the menu as follows.
MENU
: System config
PAGE
: PreKnee/Zebra (S4)
: Test → 1
ITEM
MENU
: Paint
PAGE
: W.Clip/Knee (P6)
: Auto Knee → On
ITEM
: mode → nor
ITEM
9. Set the GAIN switch (on the side panel) to H (18dB).
Set the OUTPUT/DCC switch (on the side panel) to
CAM/ON.
10. Set the menu as follows, and adjust the pre knee 1 for
R by using the MENU SEL switch.
Test Point
: TEST OUT connector
Adjustment Point:
MENU
: System config
PAGE
: PreKnee/Zebra (S4)
ITEM
: PreKnee1[R]
Specification : Minimize the carrier leakage B.
11. Set the menu as follows, and adjust the pre knee 1 for
B by using the MENU SEL switch.
Test Point
: TEST OUT connector
Adjustment Point:
MENU
: System config
PAGE
: PreKnee/Zebra (S4)
ITEM
: PreKnee1[B]
Specification : Minimize the carrier leakage B.
B
(Waveform Monitor)
BKP-5090
File Store:
Execute the file store. Press the MENU SEL switch twice
to execute.
MENU
: Trimming File
PAGE
: Trimming File (T1)
ITEM
: File Store
Resetting after Adjustment:
. Set the menu as follows.
MENU : System config
PAGE
: PreKnee/Zebra (S4)
: Test → Off
ITEM
MENU : Paint
PAGE
: W.Clip/Knee (P6)
: Auto Knee → Off
ITEM
. GAIN switch (on the side panel) → L (0 dB)
2-2. Adjustments on BVP-550/550P
2-2-6. Pre Knee Adjustment
2-9 (E)
Advertisement
