Signal Input And Output - Sony MAV-555 Installation Manual

1-7. Signal Input and Output

Input
REFERENCE
(With Loop Through Output)
(With bult-in switch for termination)
VIDEO IN (COMPOSITE) R1, R2
(With Loop Through Output)
(With bult-in switch for termination)
AUDIO IN (AES/EBU) R1, R2
SERIAL V/A IN R1, R2
(With Active Through Output)
TIME CODE IN R1, R2, SYSTEM
VS BUS
(With Loop Through Output)
(With bult-in switch for termination)
Output
VIDEO OUT (COMPOSITE) P1 to P3
AUDIO OUT (AES/EBU) P1 to P3
SERIAL V/A OUT P1 to P3
TIME CODE OUT P1 to P3
MONITOR OUT
CONTROL PANEL
(COMPOSITE VIDEO OUT)
HEAD PHONES
MAV-555
(BNC)
Sync : 0.3 Vp-p, Burst : 0.3 Vp-p, 75 Z (Sync negative)
Black burst or composite sync
(BNC)
1 Vp-p, 75 Z (Sync negative)
(BNC)
1 Vp-p (75 Z), Unbalanced
Conforms to the AES-3id-1995
(BNC)
Conforms to the CCIR-656-3/ SMPTE-259M
(BNC)
0.5 to 18 Vp-p, Impedance 10 kZ, Unbalanced
Conforms to the SMPTE-12M
(BNC)
Protocol : HDLC Flag, Syncronize
(BNC)
1 Vp-p, 75 Z (Sync negative)
(BNC)
1 Vp-p (75 Z), Unbalanced
Conforms to the AES-3id-1995
(BNC)
Conforms to the CCIR-656-3/ SMPTE-259M
(BNC)
2.2 Vp-p (600 Z) Impedance 50 Z, Unbalanced
(BNC)
SERIAL V/A (SUPER) :
Conforms to the CCIR-656-3/ SMPTE-259M
ANALOG COMPOSITE (SUPER) :
1 Vp-p, 75 Z (Sync negative)
(XLR 3-pin, male)
AUDIO L : +4 dBm/ 600 Z load,
Low impedance, Unbalanced
AUDIO R : +4 dBm/ 600 Z load,
Low impedance, Unbalanced
(BNC)
1 Vp-p, 75 Z (Sync negative)
(JM-60)
_12 dBu (8 Z), Unbalanced
1-7. Signal Input and Output
1-9 (E)