Table of Contents
Advertisement
Quick Links
Dear Musician,
Thank you for purchasing the UberTuner, and welcome to the KLIQ! To register your product warranty, please visit
www.kliqmusicgear.com/warranty. To get the most out of your new tuner, please carefully read this manual prior to
first use, and keep it for later reference.
PRECAUTIONS
1. Using the tuner in the following locations can result in a malfunction:
• In direct sunlight
• Locations of extreme temperature or humidity
• Excessively dusty or dirty locations
• Locations of excessive vibration
• Close to magnetic fields
2. When not using the tuner for an extended period of time, please remove the battery to prevent it from
leaking.
3. To avoid breakage, do not apply excessive force to the buttons, battery cover, or display.
4. If the exterior becomes dirty, wipe it with a clean, dry cloth. Do not use any chemical liquid cleaners or
water.
5. To avoid damage to your instrument‟s finish, we recommend removing the tuner from your instrument when
not in use.
INSTALLING THE BATTERY
The tuner uses 1 CR2032 3V battery (included). To install the battery, slide out the battery tray from the tuner,
insert a new battery into the tray, and gently push the battery drawer tray back in until you feel a slight "click." The
battery‟s positive side (+) should be facing up when placed inside the battery tray, as shown in the illustration below:
ATTACHING THE TUNER TO YOUR INSTRUMENT
When attaching the tuner to your instrument, please be careful as to not damage the instrument‟s finish. Do not
attach the tuner to your instrument if the rubber pads on the tuner clip are visibly worn or are missing. For guitars,
attach the tuner to the headstock with the display either in front of, or behind the headstock. For other instruments,
find a safe and visible location to attach the tuner to. Adjust the display by turning and tilting the „L‟ shaped arm
that connects the tuner to the clip. The display itself also rotates 360 degrees, which means you have many
adjustment options for optimal visibility of the tuner display.
UberTuner User‟s Manual
Page 1
Advertisement
Table of Contents
Related Manuals for KLIQ UBERTUNER
Summary of Contents for KLIQ UBERTUNER
- Page 1 Dear Musician, Thank you for purchasing the UberTuner, and welcome to the KLIQ! To register your product warranty, please visit www.kliqmusicgear.com/warranty. To get the most out of your new tuner, please carefully read this manual prior to first use, and keep it for later reference.
- Page 2 KEY button (1), the setting will cycle between C, B ♭ ♭ , and F under Chromatic Mode C, and between C and D under Ukulele Mode U, with the current value shown by the Transposition Setting Indicator (C). UberTuner User‟s Manual Page 2...
- Page 3 5. Ukulele Tuning mode a. C Tuning 4G, 3C, 2E, 1A b. D Tuning 4A, 3D, 2F#, 1B For assistance with this product, please get in touch with us by emailing support@kliqmusicgear.com, or by visiting www.kliqmusicgear.com/contact. UberTuner User‟s Manual Page 3...
Need help?
Do you have a question about the UBERTUNER and is the answer not in the manual?
Questions and answers
i have the UBERTUNER and I am trying to get the tuner to B flat for a Bflat trumpet. No matter what I do, the display shows flat. I push the tuning slide all the way in and it still shows flat.
To set the KLIQ UBERTUNER to B♭ for a B♭ trumpet:
1. Press and hold the MODE button for 2 seconds to enter tuning mode selection.
2. Scroll through the transposition settings until you reach B♭.
3. Once B♭ is selected, the tuner will correctly display concert pitch notes for a B♭ instrument.
4. If the display shows the note as flat (yellow indicators to the left), slightly increase the pitch of the note until the green circle lights up, indicating the note is in tune.
This answer is automatically generated