Clear Codes - Foxwell NT650 Elite Manual

Freeze Frame Data: a snapshot of critical vehicle operating conditions automatically recorded
by the on-board computer at the time of the DTC set. It is a good function to help determine what
caused the fault.
4. Use left and right arrow keys to scroll back and forth through different screens of data.
5. Press function key Save to store freeze frame information. Or use the BACK key to exit.

5.2.3 Clear Codes

Clear Codes menu lets you to clear all current and stored DTCs from a selected control module. Also
it erases all temporary ECU information, including freeze frame. So make sure that the selected
system is completely checked and serviced by technicians and no vital information will be lost before
clearing codes.
NOTE
To clear codes, make sure that the ignition key is switched to ON with the engine off.
●
Clear Codes does not fix the problem that caused the fault! DTCs should only be erased after
●
correcting the condition(s) that caused them.
To clear codes:
1. Scroll with the arrow keys to highlight Clear Codes from Function Menu and press the ENTER key.
2. Follow the on-screen instructions and answer questions about the vehicle being tested to complete
the procedure.
Figure 5-12 Freeze Data screen
Figure 5-13 Sample Function Menu Screen
NT650Elite Multi-Application Service Tool Manual_English_V1.01
22