Troubleshooting - HSM Powerline HDS 150 Operating Manual

Language selection in "set-up" menu
set-up:

Language
 
next | previous
• Press the Enter button.
 The configured language is shown.
• Select the desired language.
• Confi rm the selection
with the Enter key.
System parameters in "set-up" menu
set-up:

System
 
next previous
• Press the Enter button.
 The program version is displayed.
It is necessary to enter a password before you
can query and modify system settings. Param-
eters may only be changed HSM technicians.
10/2015


7

Troubleshooting

Container full
• Pull the tray out.
Empty the container.
Place the container in the tray.
Push the tray back in.
Blockade
 In the event of an overload, the drive switches
automatically and runs in reverse briefl y.
Then the cutting unit switches off.
CAUTION
cause injuries even while they are not running.
Protective gloves should be worn at all times.
• Remove the hard drive through the lid.
In the event that any fault messages should
appear, switch off the machine and switch
it on again after waiting for a minute.
Inform our customer service if the error contin-
ues to appear.
Powerline HDS 150
 The "Container full"
display lights up.
The LED fl ashes red.
The cutting unit switches
off after a brief delay.
• Restart the cutting unit. To do so,
press the "Forward" button.
The blade rollers can still
• Restart the cutting unit. To do so,
press the "Forward" button.
english
23