Advertisement
Electronic Lock Operating Manual
For FireKing KF Models
TO OPEN SAFES
Insert four 1.5V (AA) batteries after opening the cover of battery.
STEP 1: Press start button " * "
STEP 2: Press master code (4560) given by the manufacture.
STEP 3: Press the "#" button "Match" will be displayed.
STEP 4: Turn knob/handle to open the safe door.
TO CHANGE PERSONAL CODE (User Code 1)
The Personal code could be input from 4 digits to 16 digits.
STEP 1: Press the reset button located inside on back of door
STEP 2: Enter your new Personal Code (Ex: 5555)
STEP 3: Press the "#"button
STEP 4: LED will display SUCCESS! Or ERROR!
STEP 5: If ERROR is displayed redo from step 1.
Reset Button
101 Security Parkway * New Albany, IN 47150 USA * 800-457-2424/812-948-8400
www.fireking.com
Page 1
Advertisement
Table of Contents
Related Manuals for FireKing KF Series
Summary of Contents for FireKing KF Series
- Page 1 Electronic Lock Operating Manual For FireKing KF Models TO OPEN SAFES Insert four 1.5V (AA) batteries after opening the cover of battery. STEP 1: Press start button “ * “ STEP 2: Press master code (4560) given by the manufacture.
- Page 2 If you make a mistake entering the USER code, ERROR will appear on the display. After 3 wrong attempts, “PLEASE WAIT” will appear on the display for 3 minutes and it cannot be used during this time. 101 Security Parkway * New Albany, IN 47150 USA * 800-457-2424/812-948-8400 www.fireking.com Page 2...
Need help?
Do you have a question about the KF Series and is the answer not in the manual?
Questions and answers
Changed battery on fireking es18b and no power still
If the FireKing KF Series ES18B has no power after changing the battery, possible issues could include:
1. Batteries not inserted correctly (check polarity).
2. Batteries are depleted or of incorrect type (must be four 1.5V AA batteries).
3. Battery contacts are dirty or corroded.
4. Battery cover not properly closed, preventing contact.
Check these points to ensure proper battery installation and power connection.
This answer is automatically generated