Un-Pair Vervecam Tag With Your Camera; Using Vervecam Tag As A Remote Control - Motorola VERVE CAM User Manual

Un-Pair VerveCam Tag with your
Camera
When VerveCam Tag is paired with the camera:
1. Press the SHUTTER/SELECT button
camera to stop pairing.
2. Hold down the SHUTTER/SELECT button
on the camera for 2 seconds to unpair it with
VerveCam Tag.
Using VerveCam Tag as a Remote
Control
The PAIR/SHUTTER button on VerveCam Tag
works like the SHUTTER/SELECT button
your camera.
You can press the PAIR/SHUTTER button on
VerveCam Tag to:
• Take photo
• Start and Stop video recording
• Wake up the camera from standby mode
Make sure that the camera is powered On or in
Standby mode. VerveCam Tag cannot wake up
the camera when it is powered off.
With VerveCam Tag, you can shoot remotely up
to approximately 20 meters (65 feet) away from
the camera.
If you have paired VerveCam Tag with multiple
cameras, pressing the PAIR/SHUTTER button on
VerveCam Tag can trigger all the paired cameras
to take photo or video at once.
4 VerveCam Tag
on the
on
en