16 COOLING SYSTEM
16.5
132
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
S03527-10
Refilling with coolant
Warning
Danger of poisoning Coolant is toxic and a health hazard.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
S03528-10
Condition
The engine is cold.
–
Position the motorcycle upright.
–
Place an appropriate container under the water pump cover.
–
1
Remove screw
. Take off radiator cap
–
Completely drain the coolant.
–
Mount and tighten screw
Guideline
Screw, water pump
cover
Main work
–
1
Make sure that screw
–
Position the motorcycle upright.
2
.
1
with a new seal ring.
M6
10 Nm (7.4 lbf ft)
is tightened.
Need help?
Do you have a question about the 250 EXC TPI and is the answer not in the manual?
Questions and answers