Westward GO-4 INTERCEPTOR.IV Operator's Manual page 7

Controls and Gauges – cont'd
All controls and gauges are located on the dash.
Ignition Switch
(4 positions)
a. Accessory Position: Allows use of various instruments and accessories without the engine
running. Option lights, dome light, radio.
b. Position: Prevents all electrical powered accessories and engine from running except hazard
warning asher and allows key to be removed
c. On Position: This allows all accessories and engine to be run.
The key is automatically returned to this position after starting the GO-4
d. Start Position: Hold key in start to engage starter, upon engine starting release key.
Important: Do not turn the key to "start" position with engine running.
Severe damage can result to the starter drive and ring gear.
Note: If GO-4 does not start within 15 seconds, turn key to the
Damage may occur to starter if it is run continuously for an extended period of time.
6
Contact Westward Industries for Manuals and Documentation. Do not copy.
position, then try again in 30 seconds.