Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Power-Pole Charge
Summary of Contents for Power-Pole Charge
- Page 1 INSTALLATION & OWNER’S GUIDE...
- Page 2 CONGRATULATIONS on your purchase of CHARGE the 1st Marine Power Management Station from Power-Pole, the leaders in the hydraulic anchors industry. 2 | CHARGE Installation & Owner’s Guide...
-
Page 3: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ......4-6 INSTALLATION ................. 7-11 Choose a Mounting Location for the CHARGE™....8 Mount the Charge with Supplied Screws....... 8-9 Connect Charge Cables............9 Battery Configurations............10-11 OPERATION................... 12-18 LED Indicator Guide............12 Inline Fuses................. 13 Important Information for the Safe Use of Lithium Batteries... -
Page 4: Important Safety Instructions
Remove personal metal items such as rings, bracelets, necklaces, and watches when working with a lead-acid battery. A lead-acid battery can produce a short-circuit current high enough to weld a ring or the like to metal, causing a severe burn. 4 | CHARGE Installation & Owner’s Guide... - Page 5 Study all battery manufacturer’s specific precautions while charging and recommended rates of charge. Determine amp hours or reserve capacity of battery by referring to information published by the battery manufacturer, making sure that the app or device used to setup the CHARGE™ is set to the correct amp hours or reserve capacity.
- Page 6 AC POWER CORD CONNECTION PRECAUTIONS The CHARGE™ should be grounded to reduce risk of electric shock. The charger is equipped with an electric AC power cord. The plug must be plugged into an outlet that is properly installed in accordance with all local codes and ordinances.
-
Page 7: Installation
Please read all installation instructions carefully. The information contained here describes the proper procedures for safely installing your Power-Pole CHARGE™. If you have questions, contact our Customer Service Team at 1+ (813) 689-9932 option 2 or visit our website at www.power-pole.com. -
Page 8: Choose A Mounting Location For The Charge
INSTALLATION OVERVIEW This section will walk you through the steps for safely installing your new CHARGE™ system. Be sure to read and follow all information contained in this section. For questions, please contact our Customer Service Team at 1+(813) 689-9932 option 2. -
Page 9: Connect Charge Cables
MAINTENANCE & STORAGE section of this manual. • If you are changing battery configuration, you MUST fully power the CHARGE™ off by unplugging the unit from AC power and removing the positive engine and trolling motor battery cables. -
Page 10: Battery Configurations
BATTERY CONFIGURATIONS We recommend CHARGE™ be mounted to one of four different types of battery configurations. Find your exact battery configuration and wire accordingly. For all installs, the heavy 8-guage BLACK cables will go to the positive (POS, P , +) and negative (NEG, N, - ) terminals of the Engine battery, respectively. -
Page 11: Installation
(POS, P , +) post of the last trolling motor battery. Connect the BLACK cable from the CHARGE™ to the ground (NEG, N, -) post of the last trolling motor battery. CHARGE Installation & Owner’s Guide | 11... -
Page 12: Operation
OPERATION Instructions Here’s all the information you’ll need on the functions, safe use, and maintanence of your CHARGE™ unit. If you have questions, contact our Customer Service Team at 1 + (813) 689-9932 option 2 or visit our website at www.power-pole.com. -
Page 13: Inline Fuses
IMPORTANT INFORMATION FOR THE SAFE USE OF LITHIUM BATTERIES Lithium batteries are different from most traditional batteries. If you choose to use Lithium batteries with the CHARGE™, read this section for important and helpful information to ensure you get the most out of your lithium batteries and CHARGE™. -
Page 14: C-Monster 2.0 App
C-MONSTER 2.0 APP Your Android/iOS device can be a powerful tool when used in conjuction with the CHARGE. Receive important notifications, power readouts, and access special features of the CHARGE via our C-Monster app. C-Monster app features for the CHARGE include: •... -
Page 15: Ac Charging
AC CHARGING After a day on the water, simply plug the CHARGE unit into a power outlet to recharge all of your boat’s batteries. NOTE: If AC power is interrupted and restored it can take up to 2 minutes before batteries start charging again. -
Page 16: Fishing Mode
FISHING MODE Once the unit has been unplugged from the AC outlet, the CHARGE™ enters into Fishing Mode. Fishing mode is a power-management mode for on-water performance. It uses bi-directional charging to help your batteries maintain peak-performance for even the longest days on the water. -
Page 17: Alternator Charging
While the CHARGE™ system isn’t capable of unassisted on-water charging, it can work with your alternator to restore power to all of your batteries. Simply turn on your boat’s engine and the CHARGE™ will automatically start recharging your trolling motor batteries. This will in turn charge your engine battery. Running from spot to spot with the CHARGE™... -
Page 18: Maintenance And Storage
Q: How many amps does the power deliver to each battery? A: The CHARGE™ delivers a max of 40 amps to the engine battery and a max of 25 amps to the trolling motor batteries. 18 | CHARGE Installation & Owner’s Guide... - Page 19 Q: Is power lost when the CHARGE™ moves power back and forth between batteries? A: No. The CHARGE™ will actually extend your day on the water by applying power where it is needed. It transfers power between batteries very efficiently.
-
Page 20: Limited Warranty
Marine Systems, Inc. might designate. 3. Parts which prove defective after (12) months will also be repaired or replaced free of charge, but there may be a shipping and handling charge to and from the JL Marine Systems, Inc. manufacturing plant or some other place which JL Marine Systems, Inc. -
Page 21: Compliance Statements
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. CHARGE Installation & Owner’s Guide | 21... - Page 22 Have a NMEA 2000 system installed on your boat? With our C-Monster™ GATEWAY, you can see all the same CHARGE™ information from the C-Monster app and control all the functions of the CHARGE™ on your Lowrance®, Simrad or other compatible MFD. Cable Extension Kit Our Extension Cables are needed when the standard CHARGE™...
- Page 23 NOTES CHARGE Installation & Owner’s Guide| 23...
- Page 24 Need help? Contact our Customer Service Team at 1 + 813.689.9932 option 2 9010 Palm River Road, Tampa, Florida 33619 Phone 1+(813) 689-9932 Fax 1+(813) 689-8883 www.power-pole.com ©2019 all rights reserved. Power-Pole Shallow Water Anchor.
Need help?
Do you have a question about the Charge and is the answer not in the manual?
Questions and answers
On the app the engine battery is red and the 3 trolling batteries are orange. Been charging for days and nothing changes.
The engine battery is red, and the three trolling batteries are orange on the Power-Pole Charge app after several days of charging because the CHARGE™ system cannot charge batteries on its own. It requires the boat's engine to be running to recharge the trolling motor batteries, which in turn charges the engine battery. Without the engine running, the batteries may not fully charge, leading to their status being displayed as red or orange, indicating low or incomplete charge levels.
This answer is automatically generated