Download Print this page
Arcan ALJ3T Parts And Operating Manual

Arcan ALJ3T Parts And Operating Manual

3 ton capacity aluminum service jack

Advertisement

Quick Links

IMPORTANT: if you have any problems or concerns with our product, please call 1-800-879-7316 (toll-free)
for immediate assistance. Please do not call the store where you purchased this product.
ALJ3T
PRIOR TO OPERATION
Air may become trapped in the hydraulic system during transit.
To purge air:
1. Open release valve by turning handle counterclockwise.
2. Pump handle rapidly 4 full strokes. This will expel air that
may have entered hydraulic fluid passages during transit.
3. Close release valve by rotating handle clockwise and
pump handle.
4. If lift arm raises to full height, jack is ready for use.
If not, repeat this procedure or follow trouble shooting
instructions provided.
MAINTENANCE AND INSPECTION
IMPORTANT: When adding or replacing hydraulic fluid, always
use a quality hydraulic fluid. DO NOT use brake fluid, alcohol,
glycerin, detergent motor oil, or dirty oil as improper fluid can
cause serious internal damage to jack.
To add hydraulic fluid: With saddle fully lowered and jack on
level ground, remove filler plug. The hydraulic fluid should just
cover the surface of the internal cylinder visible through the hole.
Do not overfill. Replace filler plug. If low, add hydraulic fluid
as needed.
Maintenance and Inspection: The owner and/or user
must maintain and inspect the jack in accordance with the
manufacturer's instructions.
SPECIFICATIONS:
Net Weight:
26.3kg (58lbs)
Lifting Range:
9.7cm to 46cm (3.77in – 18.11in)
Overall Length:
67cm (26.37in)
Overall Width:
33cm (13in)
Min Height:
9.67cm (3.77in)
Max Height:
46cm (18.11in)
Saddle Diameter:
11.5cm (4.52in)
ALJ3T © 2007 Arcan Tools
3 TON CApACiTy ALumiNum serviCe JACk
pArTs BreAkDOWN AND OperATiNG mANuAL
This operaTing manual conTains
imporTanT safeTy informaTion.
read carefully and undersTand
all informaTion before
operaTing Tool.
save This manual for fuTure use.
Study, underStand, and follow all inStructionS
before operating thiS device. do not exceed the rated
capacity. uSe only on hard level Surface. lift only on
areaS of the vehicle aS Specified by the manufacturer.
immediately after lifting, Support the vehicle with
appropriate meanS.
do not move or dolly the vehicle while on the jack.
failure to heed theSe markingS may reSult in perSonal
injury and/ or property damage. thiS iS a lifting device
only.
no alterationS Shall be made to thiS product.
for your safeTy and To prevenT inJury:
use service Jack for

lifting purposes
only.
always support
vehicle with
jack stands.
rev. 02/26/07

Advertisement

loading
Need help?

Need help?

Do you have a question about the ALJ3T and is the answer not in the manual?

Questions and answers

Summary of Contents for Arcan ALJ3T

  • Page 1 Lifting Range: 9.7cm to 46cm (3.77in – 18.11in) Overall Length: 67cm (26.37in) for your safeTy and To prevenT inJury: Overall Width: 33cm (13in) Min Height: 9.67cm (3.77in) use service Jack for Max Height: 46cm (18.11in) lifting purposes only. Saddle Diameter: 11.5cm (4.52in) always support vehicle with jack stands. ALJ3T © 2007 Arcan Tools rev. 02/26/07...
  • Page 2 Warranty Department at 1-800-879-7316. Please have -800-879-736 available a copy of your receipt, the model number of the Monday - Friday 9am to 5pm EST product, and specific details regarding P.O. Box 58, Travelers Rest, SC 29690 your question. ALJ3T © 2007 Arcan Tools rev. 02/26/07...
  • Page 3 Discharge ball is not sealing hydraulic system and oil may be dirty. Manually flush hydraulic system. Open the release valve, as required, to raise and lower the lift arm. Manually raise and lower lift arm. ALJ3T © 2007 Arcan Tools rev. 02/26/07...