Table of Contents
Advertisement
Installation of SciLog
Note: Administrative rights to your computer are required for this procedure
Please follow the procedure below:
• Find and connect the white USB thumb drive labeled SciDoc.
• This will contain a folder labeled: SciLog
• Connect the laboratory system (LabTec™, ChemTec™, PureTec
cable and power it up.
• Click on the computer's 'Start' button, find and open the control panel, then find and open 'Device
Manager'.
• Expand the list of 'Other Devices'.
• Find the listed system, and double-click.
• On the Driver Tab, choose 'Update Driver'.
• On the next screen choose 'Browse My Computer' and browse the drive containing the USB thumb
drive mentioned in the step above, click on 'OK' or 'Next'.
• If prompted, confirm that you want to install the driver, and press 'OK'.
• Review 'Device Manager' and expand the list under Ports. The system will now be identified as
'SciExpert USB' with a COM port number assigned. Make note of this number for future use.
Note: This is a USB based COM Port. It only is shown when the device is connected and powered
on. If disconnecting / reconnecting is required, or cycling the power on the unit is required, please
provide at least 20 seconds of time before reconnecting or powering back up. Doing this too quickly
can change the COM Port number assigned to the unit stored in "Edit 1" through "Edit 10".
Device Manager Image
10
Universal USB Drivers:
®
Universal Driver V3.0.0.
®
, etc.) to the computer with the USB
®
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SciLog LabTec and is the answer not in the manual?
Questions and answers
My computer is down. Can I manually empty the tubing using the key pad on the pump? The pump has power.
Yes, you can manually operate the Parker SciLog LabTec pump using the keypad in Manual Mode. You can adjust the pump speed by pressing the "Amount" key, making the necessary adjustment, and pressing "Select." This allows you to empty the tubing without needing a computer.
This answer is automatically generated