Radio Remote Control Type Riomote - Rioned UNICOM User Manual

Table of Contents

Advertisement

11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Make sure that the HP and the supply hose are locked and tightened. Now the machine is ready for
departure!
Antifreeze can be recycled.
Ensure that not too much water is mixed with the antifreeze. If too much water gets into the
antifreeze, it is not suitable for re-use. Dispose the used antifreeze properly, hand it into a local depot
for disposal of industrial waste.
8.5 Radio remote
Purpose: To operate the high-pressure machine from a distance.
control type
Riomote
To operate the transmitter
Check before working with the transmitter if the emergency stop works well. Proceed as follows:
The machine has to cut off now
If this is not the case it is not allowed to work with the transmitter. Contact your
supplier.
12/12
Let the high-pressure pump remove all the water, which is still in the high-pressure hose
and pump.
Close the high-pressure valve or push button, when anti freeze flows out of the HP hose
(watch the colour of the water).
Connect the HP-hose (with special connection) to the supply hose.
Open the supply valve.
Close the HP valve, when anti freeze flows out of the supply hose (watch the colour of
the water).
Next you connect the hose onto the anti-freeze tank (top).
Open the HP-valve again an let the pump sends all anti freeze to the anti-freeze tank.
Close the high-pressure valve.
Switch off the machine.
Disconnect the hose and the special coupling an clean up.
Switch
on control box at "Radiographic operating"
Switch the transmitter on
Start the engine by means of button "START"
Push the "STOP" button
.
.
.
.
42

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UNICOM and is the answer not in the manual?

Questions and answers

Table of Contents