Side-By-Side - Miele KWT 2601 Vi Operating And Installation Instructions

Installation information

Side-by-side

This wine conditioning unit can be in-
stalled side-by-side with another refrig-
eration appliance. The following over-
view will show you which side-by-side
options you have with your wine condi-
tioning unit:
A side-by-side merging kit is required
for this. This is available from your
Miele dealer or Miele Technical Ser-
vice.
Instructions for installing appliances
side-by-side can be found in the side-
by-side merging kit instruction man-
ual.
. . . with partition wall
The wall a between the side-by-side
wine conditioning unit/appliances must
be at least 5/8" (16 mm) thick.
16
Each wine conditioning unit/appliance
must be built into its own niche using
the installation parts supplied.
If the partition wall a is narrower than
6 5/16" (160 mm), you need the heating
mat from the side-by-side merging kit
to prevent condensation from forming
and any resulting damage.
If the partition wall a is more than
6 5/16" (160 mm) thick, you don't need
the side-by-side merging kit, and also
not the heating mat.
. . . without partition wall
If the wine conditioning unit/appliances
are to be installed next to each other
without a partition wall between them,
they will need to be joined together with
the side-by-side merging kit. In addi-
tion, you must install the heating mat to
prevent condensation from forming and
any resulting damage.