Wheel And Tire Torque Specifications; Torque Specifications - Jeep Compass 2020 Owner's Manual

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to ensure that
the wheel is properly mounted to the vehicle. Any time a
wheel has been removed and reinstalled on the vehicle, the
lug nuts/bolts should be torqued using a properly calibrated
torque wrench using a high quality six sided (hex) deep wall
socket.

Torque Specifications

Lug Nut/Bolt **Lug Nut/Bolt
Torque Size
100 Ft-Lbs
M12 x 1.25
(135 N·m)
**Use only authorized dealer recommended lug nuts/bolts
and clean or remove any dirt or oil before tightening.
Inspect the wheel mounting surface prior to mounting the
tire and remove any corrosion or loose particles.
Lug Nut/Bolt
Socket Size
19 mm
Tighten the lug nuts/bolts in a star pattern until each nut/
bolt has been tightened twice. Ensure that the socket is fully
engaged on the lug nut/bolt (do not insert it halfway).
NOTE:
If in doubt about the correct tightness, have them checked
with a torque wrench by an authorized dealer or service
station.
TECHNICAL SPECIFICATIONS
Wheel Mounting Surface
455
8