Efi Battery Replacement; Remove Battery; Install Battery - Ariens Professional Sno-Thro Series Service Manual

EFI BATTERY REPLACEMENT

Models 926068, 926070, 926336, 926337, 926338

Remove Battery

IMPORTANT: Save all hardware for reinstallation.
1. Stop engine, remove key and wait for all moving parts
to stop and for hot parts to cool.
2. Disconnect spark plug wire from engine.
3. Disconnect wire harnesses from ECU.
4. Remove hardware retaining ECU bracket and remove
bracket. See Figure 117.
See Figure 118.
5. Disconnect wire harness from battery connector.
6. Remove hardware retaining battery bracket and
remove bracket.
Figure 117
7. Cut cable ties retaining battery to battery bracket.
Remove battery and discard.

Install Battery

1. Position battery in battery bracket and secure with two
cable ties. See Figure 119.
EN – 52
Figure 118
Figure 119